Title of the article

FRACTURE MECHANICS IN THE SERVICE OF MECHANICAL ENGINEERING

Authors

Bogdanovich A.V., Doctor of Technical Sciences, Professor, Director of Lida College of Educational Establishment "Grodno State University n.a. Yanka Kupala", Lida, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

Shishkin A.E., Candidate of Technical Sciences, Head of the Research Laboratory of Dynamics, Strength, Durability of the Lida College Educational Establishment "Grodno State University n.a. Yanka Kupala" Lida, Republic of Belarus

In the section INSTITUTIONS OF HIGHER EDUCATION OF THE REPUBLIC OF BELARUS
Year 2012 Issue 3-4 Pages 189-196
Type of article RAR Index UDK 620.191.33 Index BBK  
Abstract

The foundations of a new engineering approach to the calculation and experimental evaluation of the cyclic crack resistance of ductile steels, based on the measurement of local plastic deformation of the dangerous section of the sample in the vicinity of the crack and the construction of cyclic elastic-plastic fracture diagram set out. The results of tests on the cyclic crack growth resistance of a compact specimens cut from the pipe line sections of the pipeline after long operation are analyzed. The experimental values of characteristics of resistance of sliding and mechano-sliding fatigue of a cylindrical specimen of steel 0,45 % carbon steel with a diameter of 10 mm - liner in the form of partial conterbody of siluminum active system are received in the main rotational motion in cantilever bending are presented.

Keywords

fracture, vitality, stress intensity factor, contraction, compact sample, chart of elastic-plastic fracture, power system, friction-mechanical fatigue, pie chart wear, fatigue curve

  You can access full text version of the article.
Bibliography
  • Bogdanovich A.V. ed. Slovo o tribofatike [Word of tribo-fatigue]. Gomel'-Minsk-Moskva-Kiev, Remika, 1996. 132 p.
  • Pisarenko G.S. Aktual'nye voprosy prochnosti v sovremennom mashinostroenii [Topical issues of strength in modern mechanical engineering]. Kiev, Nauk. dumka, 1992. 192 p.
  • Sasnowski L.A. Dyjagramma cyklichnaga prugkaplastychnaga djefarmavannja wzoru z trjeshchynaj i jae haraktjernyja kropki [Diagram of the cyclic elastic-plastic deformation with crack pattern and its characteristic point]. Vesci AN BSSR, Ser. fiz.-tjehn. navuk [News of the AS of the BSSR, ser. of phys. and techn. sci.], 1990, no. 2, pp. 3-7.
  • Sosnovskij L.A., Hamaza L.A., Babich N.K. Jeksperimentalnoe issledovanie ciklicheskoj treschinostojkosti stali 20 [Experimental study of cyclic crack resistance of steel 20]. Vesci AN BSSR, Ser. fiz.-tjehn. navuk [News of the AS of the BSSR, ser. of phys. and techn. sci.], 1990, no. 6, pp. 34-38.
  • Sosnovskij L.A., Bogdanovich A.V. Analiz diagrammy ciklicheskogo uprugoplasticheskogo razrushenija obrazca s treshhinoj [Analysis of the diagram of cyclic elastic-plastic fracture specimen with a crack]. Problemy prochnosti [Problems of strength], 1995, no. 56, pp. 39-51.
  • Sosnovskij L.A., Bogdanovich A.V., Bordovskij A.M. Zhivuchest' linejnoj chasti nefteprovoda [Persistence of a linear part of a pipeline part]. Gomel, TRIBOFATIKA, 2004. 112 p.
  • Bogdanovich A.V., Veseluha V.M. Ciklicheskaja treshhinostojkost' dlitel'no jekspluatiruemoj stali trub magistral'nogo nefteprovoda [Cyclic crack resisatence for long operated steel of pipes of pipeline]. Fiziko-himicheskaja mehanika materialov [Physico-chemical mechanics of materials], 2011, no. 1, pp. 65-69.
  • Metodicheskie ukazanija. Raschety i ispytanija na prochnost'. Metody mehanicheskih ispytanij metallov. Opredelenie harakteristik treshhinostojkosti (vjazkosti razrushenija) pri ciklicheskom nagruzhenii. RD 50-345-82 [Guidelines. Calculations and tests of strength. Methods of mechanical testing of metals. Determination of fracture toughness (fracture toughness) under cyclic loading. RD 50-345-82]. Moscow, Izd-vo standartov, 1982. 43 p.
  • Bogdanovich A.V. [et al.]. Jeksperimental'noe issledovanie zakonomernostej obratnogo jeffekta silovoj sistemy «stal' 45 - silumin» pri frikcionno-mehanicheskoj ustalosti [Experimental investigation of laws of the reverse effect of the power of "Steel 45 - silumin" with friction-mechanical fatigue]. Tribofatika = Tribo-fatigue: Trudy VI Mezhdunar. simp. po tribofatike MSTF 2010 [Tribo-fatigue: Works of the VI Intern. Symp. on Tribo-Fatigue MSTF 2010]. Minsk, BGU, 2010, pp. 527-532.
  • Sosnovskij L.A. Mehanika iznosoustalostnogo povrezhdenija [Mechanics of wear fatigue damage]. Gomel', BelGUT, 2007. 434 p.
  • Elovoj O.M., Bogdanovich A.V. Lokal'nye harakteristiki iznosoustalostnogo povrezhdenija i soprotivlenie razrusheniju silovyh sistem [Local wear characteristics of fatigue damage and fracture resistance of power systems]. Gornaja mehanika [Rock mechanics], 2007, no. 1, pp. 76-83.
  • Sosnovskij L.A., Bogdanovich A.V., Elovoj O.M. Lokal'nye povrezhdenija i dolgovechnost' silovyh sistem mobil'nyh mashin [Local damages and durability of active systems of mobile machines]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2008, no. 1(2), pp. 24-29.
  • Tribofatika. Metody iznosoustalostnyh ispytanij. Ispytanija na frikcionno-mehanicheskuju ustalost'. STB 1448-2004 [Tribo-fatigue. Methods of wear-fatigue testing. Tests for friction-mechanical fatigue. STB 1448-2004]. Minsk, GOSSTANDART, 2004. 14 p.
  • Bogdanovich A.V. Prognozirovanie predel'nyh sostojanij silovyh sistem [Prediction of limit states of power systems]. Grodno, GrGU, 2008. 371 p.
  • Sosnovskij L.A., Bogdanovich A.V. Treshhinostojkost' [Fracture toughness]. Gomel', BelGUT. 366 p.

Title of the article

WHEELED VEHICLE MOTION CONTROL BASED ON MEASURING AND ANALYSIS OF FORCE FACTORS

Authors

Sazonov I.S., Doctor of Technical Sciences, Professor, Rector of the Belarusian-Russian University, Mogilev, Republic of Belarus

Kim V.A., Doctor of Technical Sciences, Professor, Professor of the Department "Technical maintenance of vehicles", Belarusian-Russian University, Mogilev, Republic of Belarus

Amelchenko P.A., Doctor of Technical Sciences, Professor, Deputy Chief of the Department of tractors and agricultural machinery - Chief Scientific Officer of the Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus

Dubovik D.A., Candidate of Technical Sciences, Associate Professor, Director of the STC "Mechanical engineering", Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus

Vasilevsky V.I., General Director of JSC "Mogilevoblavtotrans", Mogilev, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section INSTITUTIONS OF HIGHER EDUCATION OF THE REPUBLIC OF BELARUS
Year 2012 Issue 3-4 Pages 177-188
Type of article RAR Index UDK 629.33 Index BBK  
Abstract

The paper gives theoretical justification of the ways to measure actual braking torque of the wheels with the bearing face for drum and disk brakes which are necessary for creating automated brake control systems for vehicles based on load design. The results of measurement of braking torque and lateral reaction effecting the wheels of VAZ-2108 while
emergency braking («μ-split» surface) were obtained. New algorithms of braking control of vehicles which have been carried out in a model of automated control systems have been created on the basis of force factor change analysis. Test results have proved their efficiency. The paper presents methods of gaining new sources of information such as saddle-type articulated lorry segment interaction forces which make it possible to create braking control systems of articulated lorries ruling out folding of their parts at various modes of the vehicle motion. Prospects of electrical signal use which is proportionate to force factors (wheels-road contact force and force of interaction of the parts of the articulated lorry) for creating new on-board braking diagnostic systems and movement control stabilizing systems for vehicles at various motion modes (ESP systems on load design) are given in the paper.

Keywords

coefficient of relative sliding, automatic control system, information sources, control algorithm, negative derivatives, circulation of power, power analysis, emergency braking, vehicle, actually realized moments, thresholds moments

  You can access full text version of the article.
Bibliography
  • Sazonov I.S. Regulirovanie rezhimami dvizhenija polnoprivodnyh kolesnyh mashin [Regulation with traffic modes of drive wheeled vehicles]. Mogilev, Bel. nac. un-t, 2002. 242 p.
  • Kim V.A. Metodologija sozdanija sistem aktivnoj bezopasnosti avtotransportnyh sredstv na osnove analiza sil [Methodology of creation of active safety of vehicles on the basis of the analysis of forces]. Mogilev, Belorus.-Ros. un-t, 2003. 347 p.
  • Sazonov I.S. [et al.]. Dinamika kolesnyh mashin [Dynamics of wheeled vehicles]. Mogilev, Belorus.-Ros. un-t, 2006. 462 p.
  • Sazonov I.S. [et al.]. Tormoznye sistemy kolesnyh mashin [Brakes-wheeled vehicles]. Mogilev, Belorus.-Ros. un-t, 2011. 351 p.
  • Kim F.A., Portasenok V.S., Furunzhiev R.I. Ustrojstvo izmerenija tormoznogo momenta [Device for measurement of braking torque]. Patent RF, no. 2131365, 1999.
  • Minchenja N.T., Minchenja V.T., Karpovich S.L. Indukcionnyj datchik [Inductive sensor]. Patent BY, no. 7197, 2003.
  • Kim V.A., Bochkarev G.V., Sazonov I.S., Lenevskij G.S. Ustrojstvo dlja izmerenija deformacii shkvornja tjagovo-scepnogo ustrojstva sedel'nogo avtopoezda [Device to measure the deformation pin towing hitch of tractor train]. Patent BY, no. 15383, 2008.
  • Kim V.A., Kim F.A., Portasenok V.S., Furunzhiev R.I., Lobah V.P., Bochkarev G.V. Sposob upravlenija antiblokirovochnoj sistemoj tormozhenija transportnogo sredstva [Method for controlling an anti-lock braking system of a vehicle]. Patent, no. 98/01332 (WO), 1998.
  • Sazonov I.S., Skojbeda A.T., Vasilevskij V.I., Bochkarev G.V., Korsakov V.V., Kovalenko N.A., Kim V.A., Cygankov I.I., Krasnevskij L.G., Sikorskij V.V., Rogozhin V.D. Sposob regulirovanija tormozheniem avtopoezda [Method for controlling the braking train]. Patent RF, 2299140.
  • Kade A., Hopkins H.G., Salman М.А. Anti-lock Brake Control System. Patent USA, no. 784609, 1974.

Title of the article

THE DETERMINATION OF THE TEXTILE BEHAVIOR REGULARITIES UNDER COMPRESSION

Authors

Vasilevich Y.V., Doctor of Physics and Mathematics, Professor, Head of the Department "Resistance of materials of engineering profile", Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

Sakhonenko V.M., Candidate of Physical and Mathematical Sciences, Professor, Head of the Department "Applied mathematics", Moscow State Open University, Moscow, Russia

Sakhonenko S.V., Candidate of Physical and Mathematical Sciences, Deputy Associate Professor of the Department "Resistance of materials of engineering profile", Belarusian National Technical University, Minsk, Republic of Belarus

Gorely K.A., General Director, OAO "Avangard", Safonovo, Russia

Malyutin E.V., Chief Designer, OAO "Avangard", Safonovo, Russia

In the section INSTITUTIONS OF HIGHER EDUCATION OF THE REPUBLIC OF BELARUS
Year 2012 Issue 3-4 Pages 166-169
Type of article RAR Index UDK 531:678.5 Index BBK  
Abstract

The compression of the cross section of prepreg threads is carried out in conjunction with stretching of the second thread family. In the first stage it is inelastically consolidated, an irreversible compression takes place. The second stage of thread family compression is characterized by elastic deformations only. The established relationships between the relative deformation of compression and compression force are linear and reflect not only the thread material properties but the structural features of the textile too.

Keywords

fabric, thread, compression, deformation, family of yarns, deformation model, yarn section

  You can access full text version of the article.
Bibliography
  • Kawabata S. Proc. 14th Text. Res. Symp. At Mt. Fuji. The Textile Machinery Society of Japan. Osaka, 1985, p. 1.
  • Komkov M.A. [et al.]. Sdvigovye peremeshhenija nitej v neotverzhdennyh tkanyh kompozitah pod dejstviem vneshnih nagruzok [Lateral movement of filaments in uncured woven composites under the influence of external loads]. Voprosy oboronnoj tehniki. Ser. 15. Kompozicionnye nemetallicheskie materialy v mashinostroenii [Questions of defense equipment. Ser. 15. Composite non-metallic materials in mechanical engineering]. Moscow, Informtehnika, 2004, no. 1(134)-2(135), pp. 51-55.
  • Vasilevich J.V. [et al.]. Opredelenie harakteristik prepregov pri szhatii [The prepreg's characteristics under compression determination]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2012, no. 2(19), pp. 53-57.

Title of the article

PROBLEM OF PRESENCE OF THE RAILWAY ROLLING STOCK IN THE REPUBLIC OF BELARUS. RECYCLE, CAR BUILDING, TESTS

Authors

Senko V.I., Doctor of Technical Sciences, Professor, Rector of the Belarusian State University of Transport, Gomel, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.


Putyata A.V., Candidate of Technical Sciences, Associate Professor, Senior Researcher, Belarusian State University of Transport, Gomel, Republic of Belarus

In the section INSTITUTIONS OF HIGHER EDUCATION OF THE REPUBLIC OF BELARUS
Year 2012 Issue 3-4 Pages 170-176
Type of article RAR Index UDK 629.4 Index BBK  
Abstract

The problem of security of conveyances by a railway rolling stock in Republic of Belarus and the basic ways of its solution is observed. It is specified, that working capacity maintenance, improvement of park of carriages by conducting of capitally-regenerative works with life extension are effective enough solutions of the specified problem along with development of car-building manufacture in republic. The effective scientific basis of working out of competitive designs of carriages is offered and instances of its implementation at the car-repair and car-building factories are resulted. Importance of development of test baseline of a railway rolling stock in Republic of Belarus is underlined.

Keywords

rolling stock, amortization, share of a wagon, upgrade, recycling, wagon building, tests

  You can access full text version of the article.
Bibliography
  • Belorusskie vagony: proryv v budushhee [Belarusian wagons: breakthrough into the future]. Inf. bjul. Administracii Prezidenta Respubliki Belarus [Newsletter of the Administration of the President of the Republic of Belarus], 2011, no. 8, pp. 46-50.
  • Blohin E.P., Pshinko A.N. O novom v Ukraine podvizhnom sostave zheleznyh dorog [A new Ukrainian railway rolling stock]. Podvizhnoj sostav XXI veka: idei, trebovanija, proekty: sb. nauch. statej [Rolling stock of the XXI century: ideas, requirements, designs: a collection of scientific articles]. SPb., PGUPS, 2007, pp. 13-21.
  • Boronenko Ju.P., Rudakova E.A., Orlova A.M. Innovacii v telezhkah gruzovyh vagonov: real'nost' i perspektivy [Innovations in carts of freight cars: reality and prospects]. Nauka i transport [Science and transport], 2009, no. 4, pp. 14-17.
  • Boronenko Ju.P. Specializacija universal'nyh i universalizacija specializirovannyh - jeffektivnoe napravlenie povyshenija proizvoditel'nosti gruzovyh vagonov [Specialty of universal and universalization of specialized - an effective way to improve the performance of freight wagons]. Podvizhnoj sostav XXI veka: idei, trebovanija, proekty: sb. nauch. statej [Rolling stock of the XXI century: ideas, requirements, designs: a collection of scientific articles.]. SPb., PGUPS, 2009, pp. 5-16.
  • Kaletin S., Kostromichev Ju., Palkin S. Vagonnoe lit'e na prostranstve 1520 [Car casting at 1520]. Metallosnabzhenie i sbyt [Metal supply and sales], 2011, no. 6, pp. 82-89.
  • Normy dlja rascheta i proektirovanija vagonov zheleznyh dorog MPS kolei 1520 mm (nesamohodnyh) [The rules for the calculation and design of railway wagons MPS 1520 mm (non-powered)]. GosNIIVVNIIZhT [StateNIIVVNIIZhT]. Moscow, 1996. 319 p.
  • Normy dlja rascheta i proektirovanija vagonov zheleznyh dorog MPS kolei 1520 mm (nesamohodnyh) [The rules for the calculation and design of railway wagons MPS 1520 mm (non-powered)]. GosNIIVVNIIZhT [StateNIIVVNIIZhT], Moscow, 1983. 260 p.
  • Putjato A.V. Teorija i praktika sovershenstvovanija konstrukcij kuzovov vagonov s uchetom vzaimodejstvija s perevozimymi gruzami [Theory and practice of improving the design of car bodies, taking into account the interaction with the goods being carried]. Gomel, BelGUT, 2011. 295p.

Title of the article

SOME DEVELOPMENTS FOR MATHEMATICAL THEORY OF MODERN MECHANICS

Authors

Zhuravkov M.A., Doctor of Physical and Mathematical Sciences, Professor, Vice-Rector, Head of the Department "Theoretical and applied mechanics", Belarusian State University, Minsk, Republic of Belarus

Pleskachevsky Yu.M., Corresponding Member of the NAS of Belarus, Doctor of Technical Sciences, Professor, Chairman of the Presidium of the Gomel branch of the NAS of Belarus, Gomel, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

Romanova N.S., Head of the Department of Youth Programs and Projects, Competitor of the Department of Theoretical and Applied Mechanics, Mechanical and Mathematical Faculty of the Belarusian State University, Minsk, Republic of Belarus

In the section INSTITUTIONS OF HIGHER EDUCATION OF THE REPUBLIC OF BELARUS
Year 2012 Issue 3-4 Pages 158-165
Type of article RAR Index UDK 539.2/.6+612.76+519.68:[5/6+3] Index BBK  
Abstract

Classical development and the formation of some new modern branches in mechanics require continuous improvement and modification of mathematical models and methods to solve the model problems. In this article we consider some developments in mechanics and mathematical models for the description of the mechanical state and different material behaviour and perspectives of fractional calculus for the use in mechanics, and describe the conjugate biophysical and biomechanical problems, the mathematical models of material deformation taking into account their complex heterogeneous structure.

Keywords

mechanical and mathematical models of fractional order, generalized model of Maxwell, Kelvin-Voigt, Zener, models of viscoelasticity, heterogeneous environments

  You can access full text version of the article.
Bibliography
  • Samko S.G. Kilbas A.A., Marichev O.I. Integraly i proizvodnye drobnogo porjadka i nekotorye prilozhenija [Integrals and derivatives of fractional order and some applications]. Minsk, Nauka i tehnika, 1987. 687 p.
  • Podlubny I. Fractional differential equations. Mathematics in Sciences and Engineering. San Diego, 1999. 198 p.
  • Bagley R.L., Torvik P.J. On the fractional calculus model of viscoelastic behavior. Journal of Rheology, 1986, vol. 30, pp. 133-155.
  • Caputo M. Vibrations of an infinite plate with a frequency independent Q. Journal of the Acoustical Society of America, 1976, vol. 60(3), pp. 634-639.
  • Caputo M., Mainardi F. A new dissipation model based on memory mechanism. Pure and Applied Geophysics, 1971, vol. 91(1), pp. 134-147.
  • Rouse P.E. The theory of the linear viscoelastic properties of dilute solutions of coiling polymers. Journal of Chemical Physics, 1953, vol. 21, pp. 1272-1280.
  • Compte A. Stochastic foundations of fractional dynamics. Phys. Rev.E., 1996, vol. 53(4), pp. 4191-4193.
  • Zhuravkov M.A., Starovojtov Je.I. Mehanika sploshnyh sred. Teorija uprugosti i plastichnosti [Continuum Mechanics. The theory of elasticity and plasticity]. Minsk, BGU, 2011. 543 p.
  • Koeller R.C. Applications of fractional calculus to the theory of viscoelasticity. Journal of Applied Mechanics, 1984, vol. 51(2), pp. 299-307.
  • Friedrich C. Relaxation and retardation functions of the Maxwell model with fractional derivatives. Rheologica Acta, 1991, vol. 30, pp. 151-158.
  • Nonnenmacher T.F., Glockle W.G. A fractional model for mechanical stress relaxation. Phil. Mag. Lett., 1991, vol. 64(2), pp. 89-93.
  • Heymans N., Bauwens J.-C. Fractal rheological models and fractional differential equations for viscoelastic behavior. Rheologica Acta., 1994, vol. 33(3), pp. 210-219.
  • Padovan J., Sawicki J.T. Diophantinized fractional representations for nonlinear elastomeric media. Computers and Structures, 1998, vol. 66, pp. 613-626.
  • Schiessel H. [et al.]. Generalized viscoelastic models: Their fractional equations with solutions. Journal of Physics A: Mathematical and General, 1995, vol. 28, pp. 6567-6584.
  • Hwang J.S., Wang J.C. Seismic response prediction of high damping rubber bearings fractional derivatives Maxwell model. Engineering Structures, 1998, vol. 20(9), pp. 849-856.
  • Park S.W. Analytical modeling of viscoelastic dampers for structural and vibration control. Int.J. Solids Struct., 2001, vol. 38(44-45), pp. 8065-8092.
  • Makris N., Constantinou M.C. Fractional derivative Maxwell model for viscous dampers. Journal of Structural Engineering ASCE, 1991, vol. 117(9), pp.2708-2724.
  • Rabotnov Ju.N. Polzuchest' jelementov konstrukcij [Creep of structural elements]. Moscow, Nauka, 1966. 753 p.
  • Meshkov S.I., Pachevskaja G.N., Shermergor T.D. K opisaniju vnutrennego trenija pri pomoshhi drobno-jeksponencial'nyh jader [The description of internal friction using fractional exponential kernels]. PMTF, 1966, no. 3.
  • Zelenev V.M., Meshkov S.I., Rossihin Ju.A. Zatuhajushhie kolebanija uprugo nasledstvennyh sistem so slabosinguljarnymi jadrami [Damped oscillations of elastic hereditary systems with weakly singular kernels]. PMTF, 1970, no. 2, pp. 104-108.
  • Sasso M., Palmieri G., Amodio D. Application of fractional derivative models in linear viscoelastic problems. Mech. Time-Depend Mater, 2011, vol. 15, pp. 367-387.
  • Can Meral F., Thomas J. Royston Surface response of a fractional order viscoelastic halfspace to surface and subsurface sources. J. Acoust. Soc. Am., vol. 126(6), 2009, pp. 3278-3285.
  • Warlus S., Ponton A., Leslous A. Dynamic viscoelastic properties of silica alkoxide during the sol-gel transition. Eur. Phys. Journal E., 2003, vol. 12, pp. 275-282.
  • Dietrich L., Turski K. Analysis of identification methods for the viscoelastic properties of materials. Eng. Trans., 1992, vol. 40, pp. 501-523.
  • West B.J., Deering W. Fractal physiology for physicists: Levy statistics. Phys. Rep., 1994, vol. 246, pp. 1-100.
  • West B.J. Fractal probability density and EEF/ERP time series (Chapter 10). In Fractal Geometry in Biological Systems. Boca Raton, CRC, 1995, pp. 267-316.
  • West B.J., Bologna M., Grigolini P. Physics of Fractal Operators. New York, Springer, 2003.
  • Fung Y.C. Biomechanics: Mechanical properties of living tissues. Springer-Verlag, New York, 1981.
  • Iomin A. Fractional transport of cancer cells due to self-entrapment by fission. Mathemat. Modeling of biological systems. Modeling and simulation in science, engineering and technology, 2007, part IV, pp. 193-203.
  • Palocaren A., Drapaca C. Biomechanical modeling of tumor growth: its relevance to glioma research. Intern. Journ. Of Num. Analysis and Modeling, Series B, 2012, vol. 3(1). - pp. 94-108.
  • Metzler R., Klafter J. The Random walker's guide to anomalous diffusion: a fractional dynamics approach. Phys. Reports, 2000, vol. 339, pp. 1-77.
  • Weiss M., Hashimoto H., Nilsson T. Anomalous protein diffusion in living cells as seen by fluorescence correlation spectroscopy. Biophys. Journ., 2002, vol. 84, pp. 4043-4052.
  • Craiem D.O. [et al.]. Fractional calculus applied to model arterial viscoelasticity. Latin American Applied Research, 2008, vol. 38, pp. 141-145.
  • Djordjevic V.D. [et al.]. Fractional derivatives embody essential features of cell rheological behavior. Ann. Biomed. Eng., 2003, vol. 31, pp. 692-699.
  • Kiss M.Z., Varghese T., Hall T.J. Viscoelastic characterization of in vitro canine tissue. Phys. Med. Biol., 2004, vol. 49, pp. 4207-4218.
  • Hardung, V. Method for measurement of dynamic elasticity and viscosity of caoutchouc-like bodies, especially of blood vessels and other elastic tissues. Helv. Physiol. Pharmacol. Acta., 1952, vol. 10, pp. 482-498.
  • Pleskachevskij Ju.M., Shil'ko S.V. Auksetiki: modeli i prilozhenija [Auxetics: models and applications]. Vesti NAN Belarusi [News of the NAS of Belarus], 2003, no. 4, pp. 58-68.
  • Zhuravkov M.A., Prohorov P.A. Deformirovanie blochno-sloistyh massivov gornyh porod v okrestnosti podzemnyh sooruzhenij [Deformation of block-layered rock mass in the vicinity of underground structures]. Gornaja mehanika [Rock mechanics], 2008, no. 2, pp. 3-13.
  • Zhuravkov M.A., Makaeva T.A. Mehaniko-matematicheskie modeli povedenija deformiruemyh tverdyh uprugih sred s uchetom ih vnutrennej struktury [Mechanics and mathematical models for behavior of the deformable solid and elastic mediums with regard to their internal structure]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2012, no. 1, pp. 29-38.