Title of the article The deformations of the craniofacial complex of cross-bite
Authors

Bosiakov S.M., PhD in Physical and Mathematical Sciences, Associate Professor of the Department of Theoretical and Applied Mechanics of the Belarusian State University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

Vinokurova A.V., Graduate Student of the Mechanical Faculty of the Technology University, Rzheshuv, Poland (Rzeszow University of Technology)

Dosta A.N., PhD in Medical Sciencies, Associate Professor of the Department of Orthopedic Dentistry of the Belarusian State Medical University, Minsk, Republic of Belarus

In the section BIOMECHANICS
Year 2014 Issue 4 Pages 87-94
Type of article RAR Index UDK 539.3+612.311 Index BBK  
Abstract The finite element modeling of the stress-strain state of a human skull during maxillary expansion using different designs of the orthodontic device HYRAX is carried out. The finite-element models of the craniofacial complex and supporting teeth are obtained on the basis of the tomographic data. Orthodontic appliance designs differ in the locations of the screw relative to the palate. The design with the location of the device rods and the screw in the same horizontal plane as well as the design with the location of the screw on 8 mm closer to the palate relative to the horizontal position are considered. Activation of the screw is carried out on a half turn. The displacements vector fields of a intact skull, a skull with a palate cleft, and the supporting teeth are obtained. Regions of the largest displacements of the skull bone structures are defined for different designs. Influence of the orthodontic appliance design on displacements of the supporting teeth is analyzed. The results can be used for the design of devices HYRAX for the treatment of cross-bite with taking into account the patient individual features.
Keywords rapid maxillary expansion, craniofacial complex, crossbite, palate cleft, finite element modeling, orthdontic appliance HYRAX
  You can access full text version of the article
Bibliography
  • Chaconas S.J., Caputo A.A. Observation of orthopedic force distribution produced by maxillary orthodontic appliances. Am. J. Orthod, 1982, vol. 82, pp. 492-501.
  • Isaacson, R.J., Wood J.L., Ingram A.H. Forces produced by rapid maxillary expansion. Part I. Design of the force measuring system. Angle Orthod, 1964, vol. 34, pp. 256-260.
  • Isaacson R.J., Ingram A.H. Forces produced by rapid maxillary expansion. Part II. Forces present during treatment. Angle Orthod, 1964, vol. 34, pp. 261-270.
  • Sander C. [et al.]. Initial results regarding force exertion during rapid maxillary expansion in children. J. Orofacial Orthoped, 2006, vol. 67, pp. 19-26.
  • Landes C.A. [et al.]. Comparison of bipartite versus tripartite osteotomy for maxillary transversal expansion using 3-dimensional preoperative and postexpansion computed tomography data. J. Oral Maxillofacial Surg, 2009, vol. 67, pp. 2287-2301.
  • Zimring, J.F., Isaacson R.J. Forces produced by rapid maxillary expansion. Part III. Forces present during retention. Angle Orthod, 1965, vol. 35, pp. 178-186.
  • Timms, D.J. A study of basal movement with rapid maxillary expansion. Am. J. Orthod, 1980, vol. 77, pp. 500-507.
  • Boryor A. [et al.]. Stress distribution and displacement analysis during an intermaxillary disjunction - A three-dimensional FEM study of a human skull. J. Biomech, 2008, vol. 41, pp. 376-382.
  • Iseri H. Biomechanical effects of rapid maxillary expansion on the craniofacial skeleton, studied by the finite element method. Eur. J. Orthod, 1998, vol. 20, pp. 347-356.
  • Jafari A., Shetty K., Kumar M. Study of stress distribution and displacement of various craniofacial structures following application of transverse orthopedic forces- a three-dimensional FEM study. Angle Orthod, 2003, vol. 73, no. 1, pp. 12-20.
  • Lee H. [et al.]. Maxillary expansion in customized finite element method models. Am. J. Orthod. Dentofacial Orthop, 2009, vol. 136, no. 3, pp. 367-374.
  • Ludwig B. [et al.]. Application of a new viscoelastic finite element method model and analysis of miniscrew-supported hybrid hyrax treatment. Am. J. Orthod. Dentofacial Orthop, 2013, vol. 143, no. 3, pp. 426-435.
  • Pan X. [et al.]. Biomechanical Effects of Rapid Palatal Expansion on the Craniofacial Skeleton with Cleft Palate: A Three-Dimensional Finite Element Analysis. Cleft Palate-Craniofacial J, 2007, vol. 44, no. 2, pp. 149-154.
  • Provatidis C. [et al.]. On the FEM modeling of craniofacial changes during rapid maxillary expansion. Med. Eng. Phys., 2007, vol. 29, pp. 566-579.
  • Wang D. [et al.]. Biomechanical analysis of rapid maxillary expansion in the UCLP patient. Med. Eng. Phys., 2009, vol. 31, pp. 409-417.
  • Holberg C. [et al.]. Biomechanical analysis of maxillary expansion in CLP patients. Angle Orthod, 2007, vol. 77, pp. 280-287.
  • Tanne K., Sakuda M. Biomechanical and clinical changes of the craniofacial complex from orthopedic maxillary protraction. Angle Orthod, 1991, vol. 61, no. 2, pp. 145-152.
  • Yu H.S. [et al.]. Three-dimensional finite-element analysis of maxillary protraction with and without rapid palatal expansion. Eur. J. Orthod, 2007, vol. 29, pp. 118-125.
  • Zhao L., Herman J.E., Patel P.K. The structural implications of a unilateral facial skeletal cleft: a three-dimensional finite element model approach. Cleft Palate-Craniofacial J, 2008, vol. 45, no. 2, pp. 121-130.
  • Han U.A., Kim Yo., Park J.U. Three-dimensional finite element analysis of stress distribution and displacement of the maxilla following surgically assisted rapid maxillary expansion. J. Cranio-Maxillofacial Surg, 2009, vol. 37, pp. 145-154.
  • Gautam P., Zhao L., Patel P. Biomechanical response of the maxillofacial skeleton to transpalatal orthopedic force in a unilateral palatal cleft. Angle Orthod, 2011, vol. 81, no. 3, pp. 503-509.
  • Holberg C., Rudzki-Janson I. Stresses at the cranial base induced by rapid maxillary expansion. Angle Orthod, 2006, vol. 76, pp. 543-550.
  • Holberg C., Steinhauser S., Rudzki-Janson I. Rapid maxillary expansion in adults: cranial stress reduction depending on the extent of surgery. Eur. J. Orthod, 2007, vol. 29, pp. 31-36.
  • Provatidis C. [et al.]. In vitro validated finite element method model for a human skull and related craniofacial effects during rapid maxillary expansion. Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 2006, vol. 220, pp. 897-907.
  • Tanne K. [et al.]. Biomechanical effect of anteriorly directed extraoral forces on the craniofacial complex: a study using the finite elements method. Am. J. Orthod. Dentofacial Orthop, 1989, vol. 95, no. 3, pp. 200-207.
  • Tanne K., Hiraga J., Sakuda M. Effects of directions of maxillary forces on biomechanical changes in craniofacial complex. Eur. J. Orthod, 1989, vol. 11, pp. 382-391.
  • Kragt G., Duterloo H.S., Ten Bosch J.J. The initial reaction of a macerated human skull caused by orthodontic cervical traction determined by laser metrology. Am. J. Orthod, 1982, vol. 81, pp. 49-56.
  • Wood S.A. [et al.]. The effects of modeling simplifications on craniofacial finite element models: The alveoli (tooth sockets) and periodontal ligaments. J. Biomech, 2011, vol. 44, pp. 1831-1838.
  • Susami T., Kuroda T., Amagasa T. Orthodontic treatment of a cleft palate patient with surgically assisted rapid maxillary expansion. Cleft Palate-Craniofacial J., 1996, vol. 33, no. 5, pp. 445-449.
  • Ghoneima A. [et al.]. Effects of rapid maxillary expansion on the cranial and circummaxillary sutures. Am. J. Orthod. Dentofacial Orthop, 2011, vol. 140, pp. 510-519.
  • Weissheimer A. [et al.]. Immediate effects of rapid maxillary expansion with Haas-type and hyrax-type expanders: A randomized clinical trial. Am. J. Orthod. Dentofacial Orthop, 2011, vol. 140, pp. 366-376.
  • Memikoglu T.U.T., Iseri H. Effects of a bonded rapid maxillary expansion appliance during orthodontic treatment. Angle Orthod, 1999, vol. 69, no. 3, pp. 251-256.
  • Majourau A., Nanda R. Biomechanical basis of vertical dimension control during rapid palatal expansion therapy. Am. J. Orthod. Dentofacial Orthop, 1994, vol. 106, pp. 322-328.
  • Braun S. [et al.]. The biomechanics of maxillary sutural expansion. Am. J. Orthod. Dentofacial Orthop, 2000, vol. 118, pp. 257-261.
  • Chung C.H., Font B. Skeletal and dental changes in the sagittal, vertical, and transverse dimensions after rapid palatal expansion. Am. J. Orthod. Dentofacial Orthop, 2004, vol. 126, pp. 569-575.