Smart Search 


2_2024_sen_9

Title of the article RESEARCH OF THE COMPOSITION INFLUENCE OF COMPOSITES CONTAINING IMPACT DIAMONDS ON THEIR PERFORMANCE CHARACTERISTICS IN BLADE PROCESSING OF NON-FERROUS METALS
Authors

SENYUT Vladimir T., Ph. D. in Eng., Assoc. Prof., Leading Researcher of the Laboratory of Nanostructured and Superhard Materials of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

VITYAZ Petr A., Academician of the NAS of Belarus, D. Sc. in Eng., Prof., Head of the Aerospace Activities Department, National Academy of Sciences of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ZHORNIK Viktor I., D. Sc. in Eng., Prof., Head of the Department of Technologies of Mechanical Engineering and Metallurgy of the R&D Center “Mechanical Engineering Technologies and Processing Equipment” – Head of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

VALKOVICH Igor V., Senior Researcher of the Laboratory of Nanostructured and Superhard Materials of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

AFANASYEV Valentin P., D. Sc. in Geology and Mineralogy, Chief Researcher of the Laboratory of Lithospheric Mantle and Diamond Deposits, V.S. Sobolev Institute of Geology and Mineralogy of the Siberian Branch of the RAS, Novosibirsk, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

GRIGORIEV Igor E., Ph. D. Student, Belarusian State Technological University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MATERIALS SCIENCE IN MECHANICAL ENGINEERING
Year 2024
Issue 2(67)
Pages 69–78
Type of article RAR
Index UDK 621.762:621.921.34
DOI https://doi.org/10.46864/1995-0470-2024-2-67-69-78
Abstract The paper presents the results of resistance tests of tool composite materials containing nanostructured impact diamonds, in comparison with composites based on synthetic superhard materials, diamond and cubic boron nitride (cBN), and ВК-8 (VK-8) (WC + 8 % Co) hard alloy, during blade processing of workpieces made of brass ЛС-59 (LS -59) (57–60 % Cu) and aluminum alloy AK-7 (Al 92–94 %, Si 6–8 %). Samples of composite materials for wear resistance studies were obtained by thermobaric sintering in a highpressure apparatus. The performance of composites was assessed by the wear of the cutter back surface, as well as by a specially developed method for studying the performance characteristics of composite superhard materials, based on determining their specific productivity. As a result of the tests, it is found that composites based on impact diamonds have the highest resistance when turning non-ferrous metal alloys. In particular, the wear resistance of a composite material containing impact diamonds with the addition of cBN exceeds the wear resistance of cutters made of composite 02 (belbor) by 1.5–3 times, and that of cutters made of hard alloy VK-8 by 8–10 times. Additions of impact diamond to hard alloy in the amount of 6.25 and 12.5 vol.% increase the relative wear resistance of the hard alloy composite compared to the original VK-8 alloy by 10–15 and 20–25 %, respectively.
Keywords blade processing, impact diamonds, hard alloy, composite materials, wear resistance
  You can access full text version of the article.
Bibliography
  1. Sverkhtverdye materialy: poluchenie i primenenie. T. 1: Sintez almazov i podobnykh materialov [Superhard materials: production and application. Vol. 1: Synthesis of diamonds and similar materials]. Kiev, ALKON Publ., 2003. 320 p. (in Russ.).
  2. Garshin A.P., Svyazkina T.M. Rezhushchiy instrument na osnove sverkhtverdykh materialov [Cutting tools based on superhard materials]. Saint Petersburg, KhIMIZDAT Publ, 2019. 104 p. (in Russ.).
  3. Polushin N.I., Laptev A.I., Sorokin M.N., Ovchinnikova M.S., Maslov A.L. Sverkhtverdye materialy: protsessy polucheniya i svoystva sverkhtverdykh materialov [Superhard materials: production processes and properties of superhard materials]. Moscow, Izdatelskiy Dom NITU MISiS Publ., 2014. 54 p. (in Russ.).
  4. Bezhenar N.P., et al. Sintez i spekanie sverkhtverdykh materialov dlya proizvodstva instrumenta [Synthesis and sintering of superhard materials for the production of tools]. Minsk, Belorusskaya nauka Publ., 2021. 337 p. (in Russ.).
  5. Klimenko S.A., et al. Finishnaya obrabotka poverkhnostey pri proizvodstve detaley [Surface finishing in the production of parts]. Minsk, Belorusskaya nauka Publ., 2017. 376 p. (in Russ.).
  6. Bogatyreva G.P., et al. Instrumenty iz sverkhtverdykh materialov [Tools made of superhard materials]. Moscow, Mashinostroenie Publ., 2014. 608 p. (in Russ.).
  7. Vityaz P.A., Senyut V.T., Zhornik V.I. Nanostrukturnye kompozitsionnye materialy instrumentalnogo naznacheniya na osnove kubicheskogo nitrida bora [Nanostructured composite materials of tool appointment based on cubic boron nitride]. Perspektivnye materialy i tekhnologii, 2017, vol. 2, pp. 254–277 (in Russ.).
  8. Afanasiev V., Pokhilenko N., Eliseev A., Gromilov S., Ugapieva S., Senyut V. Impact diamonds: types, properties, and uses. Proc. 14th International congress for applied mineralogy (ICAM2019). Belgorod, 2019, pp. 179–182. DOI: https://doi.org/10.1007/978-3-030-22974-0_41.
  9. Vishnevskiy S.A. Popigayskaya astroblema [Popigai astrobleme]. Novosibirsk, Geo Publ., 2016. 71 p. (in Russ.).
  10. Afanasiev V.P., Ugap’eva S.S., Yelisseyev A.P., Gromilov S.A., Pavlushin A.D. Yakutity – impaktnye almazy Popigayskoy astroblemy [Yakutites are impact diamonds of the Popigai astrobleme]. Ores and metals, 2019, no. 2, pp. 30–37. DOI: https://doi.org/10.24411/0869-5997-2019-10011 (in Russ.).
  11. Vityaz P.A., et al. Sintez nanostrukturnogo almaz-lonsdeylitnogo instrumentalnogo kompozita dlya abrazivnoy obrabotki [Synthesis of nanostructured diamond-lonsdaleite tool composite for abrasive treatment]. Aktualnye voprosy mashinovedeniya, 2019, iss. 8, pp. 352–356 (in Russ.).
  12. Sheleg V.K., Zhornik V.I., Senyut V.T., Kovaleva S.A., Khomich N.S. Kompozitsionnyy material na osnove nanostrukturirovannykh impaktnykh almazov dlya abrazivnoy obrabotki [Composite material based on nanostructured impact diamonds for abrasive processing]. Mashinostroenie, 2020, iss. 32, pp. 71–79 (in Russ.).
  13. Dyachkova L.N., Ilyushchanka A.Ph., Osipov V.A., Babura D.V. Influence of diamond-lonsdaleite abrasive additives on the structure and properties of reactional SiC ceramics. Diamante. Applizioni & tecnologia, 2021, no. 103, pp. 33–41.
  14. Senyut V.T., Vityaz P.A., Zhornik V.I., Valkovich I.V., Pinchuk T.I., Afanasyev V.P. Issledovanie sostava spechennykh kompozitov «tverdyy splav VK-8 – impaktnyy almaz» na ikh iznosostoykost [Investigation of the influence of the composition of sintered composites “hard alloy ВК-8 (VK-8) – impact diamond” on their wear resistance]. Aktualnye voprosy mashinovedeniya, 2022, iss. 11, pp. 339–345 (in Russ.).
  15. Muzykant Ya.A., Molodykh S.U. Metodicheskie ukazaniya po uskorennym ispytaniyam instrumentov iz novykh sverkhtverdykh materialov [Guidelines for accelerated testing of tools made of new superhard materials]. Moscow, NIImash Publ., 1979. 12 p. (in Russ.).
  16. Golubev A.S., Kurdyumov A.V., Pilyankevich A.N. Nitrid bora. Struktura, svoystva, poluchenie [Boron nitride. Structure, properties, production]. Kiev, Nauchnaya mysl Publ., 1987. 200 p. (in Russ.).