Smart Search 


1_2025_sen_6

Title of the article MANUFACTURING OF AGRICULTURAL MACHINERY METAL PARTS USING ADDITIVE SHEET LAMINATION TECHNOLOGY
Authors

TOLOCHKO Nikolay K., D. Sc. in Phys. and Math., Prof., Professor of the Technologies and Organization of Technical Services Department, Belarusian State Agrarian Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

AURAMENKA Pavel V., Ph. D. in Eng., Assoc. Prof., Head of the Standardization, Metrology and Engineering Graphics Department, Belarusian State Agrarian Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

KRAVTSOV Vyacheslav B., Senior Lecturer of the Technologies and Organization of Technical Services Department, Belarusian State Agrarian Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

LEVSHUKOV Andrey P., Deputy Director – Chief Engineer, OJSC “Minsk Gear Works”, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

ASTREYKO Kirill Yu., Head of the Department of Agricultural Machinery, OJSC “Minsk Gear Works”, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICAL ENGINEERING MATERIALS AND TECHNOLOGIES
Year 2025
Issue 1(70)
Pages 59–65
Type of article RAR
Index UDK 621.77.04
DOI https://doi.org/10.46864/1995-0470-2025-1-70-59-65
Abstract Possibilities and prospects are considered for application of additive sheet lamination technology for direct manufacturing of agricultural machinery metal parts on the example of manufacturing of plow steel beam. Traditional design of plow beam and traditional technology of its manufacturing are analyzed. Modification of the beam design, including formation of multilayer structure and topological optimization with regard to its fabrication has been carried out using additive sheet lamination technology. The experimental sample of the beam of modified design was produced using combined additive and conventional technology and tested as part of the plow. Comparison of the design features and structural scheme of the technological process of the beam manufacturing using the traditional and modified methods is carried out. It is shown that the proposed design and technological developments provide a 17 % and more decrease in the beam weight while maintaining its required functional properties, 1.6 times increase in productivity and 1.4 times decrease in the cost of its manufacture. Thus, the incorporation of additive sheet lamination technology into the traditional technological chain of metal parts manufacturing makes it possible to increase the efficiency of production.
Keywords plow beam, design, manufacturing, testing, additive technology, sheet lamination
  You can access full text version of the article.
Bibliography
  1. Zlenko M.A., Nagaytsev M.V., Dovbysh V.M. Additivnye tekhnologii v mashinostroenii [Additive technologies in mechanical engineering]. Moscow, GNTs RF FGUP “NAMI” Publ., 2015. 220 p. (in Russ.).
  2. Tebianian M., et al. A review of the metal additive manufacturing processes. Materials, 2023, vol. 16, iss. 24. DOI: https://doi.org/10.3390/ma16247514.
  3. Tolochko N.K., Sokol O.V. Metodologicheskie aspekty otsenki effektivnosti additivnoy tekhnologii listovogo laminirovaniya [Methodological aspects of assessing the effectiveness of additive technology of sheet lamination]. Vestnik mashinostroeniya, 2020, no. 10, pp. 11–15. DOI: https://doi.org/10.36652/0042-4633-2020-10-11-15 (in Russ.).
  4. DiMatteo P.L. Method of generating and constructing three-dimensional bodies. Patent US, no. 3932923A, 1976.
  5. Walczyk D.F., Dolar N.Y. Bonding methods for laminated tooling. Proc. 1997 International solid freeform fabrication symposium. Austin, 1997, pp. 211–221.
  6. Alami A.H. Using laminated metal tooling (LMT) in die manufacturing for clay moulding. Proc. 5th International symposium on mechatronics and its applications (ISMA08). Amman, 2008. DOI: https://doi.org/10.1109/ISMA.2008.4648806.
  7. Nakagawa T. Blanking tool by stacked bainite steel plates. Press technique, 1979, pp. 93–101.
  8. Yi S.P., Ha J., Lin L.H., Zhang J. Connect technique of laminated object manufacturing using metallic materials as modeling materials. Journal of Chongqing University, 2002, vol. 25, iss. 2, pp. 1–4. DOI: http://dx.doi.org/10.11835/j.issn.1000-582X.2002.02.001 (in Chinese).
  9. Himmer T., Techel A., Nowotny S., Beyer E. Recent developments in metal laminated tolling by multiple laser processing. Proc. 2002 International solid freeform fabrication symposium. Austin, 2002, pp. 466–473.
  10. Yoshino M., Obikawa T., Shinzuka J. Rapid manufacturing system by sheet steel lamination method. Transactions of the Japan Society of Mechanical Engineers. Series C, 2000, vol. 66, iss. 642, pp. 265–270. DOI: https://doi.org/10.1299/kikaic.66.667 (in Japanese).
  11. Bryden B.G., Pashby I.R. Sequential laminated tooling, joined by brazing, for injection molding. Rapid prototyping journal, 1999, vol. 5, iss. 2, pp. 89–93. DOI: https://doi.org/10.1108/13552549910267470.
  12. Yoon S.H., Na S.J. Rapid laminated tooling by a brazing and soldering process. Journal of manufacturing processes, 2003, vol. 5, iss. 2, pp. 118–126. DOI: https://doi.org/10.1016/S1526-6125(03)70047-4.
  13. Ahari H., Khajepour A., Bedi S. Laminated injection mould with conformal cooling channels: optimization, fabrication and testing. Journal of machinery manufacturing and automation, 2013, vol. 2, iss. 2, pp. 16–24.
  14. Zak G., Wang W.X. Adhesive bonding of sheet for laminated metal tooling. Proc. 2002 International solid freeform fabrication symposium. Austin, 2002, pp. 502–509.
  15. Kleimenova Yu.A., Bayanduryan G.L. Osobennosti razvitiya selskokhozyaystvennogo mashinostroeniya v usloviyakh sovremennogo sanktsionnogo davleniya [Features of the development of
    agricultural engineering in the conditions of modern sanctions pressure]. Agrarian science, 2024, no. 379(2), pp. 133–138. DOI: https://doi.org/10.32634/0869-8155-2024-379-2-133-138 (in Russ.).
  16. Tolochko N.K., Sokol O.V. Additivnye tekhnologii: problema stupenchatogo relefa poverkhnosti [Additive technologies: the problem of stepped surface relief]. Agropanorama, 2019, no. 2, pp. 12–16 (in Russ.).
  17. Nesmiyan A.Yu., Gorbatyuk A.P., Kaymakova A.S. Etapy i perspektivy razvitiya navesnoy selskokhozyaystvennoy tekhniki [Stages and prospects of development of mounted agricultural machinery]. Nauchnyy zhurnal Rossiyskogo NII problem melioratsii, 2020, no. 2(38), pp. 179–195. DOI: https://doi.org/10.31774/2222-1816-2020-2-179-195 (in Russ.).
  18. Kheyfets M.L., Krutko V.S., Gretsky N.L., Ratutskaya D.S. Kompleksy mekhatronnogo oborudavaniya dlya additivnogo proizvodstva krupnogabaritnykh izdeliy [Mechatronic equipment systems for additive manufacturing of large-dimensioned products]. Science intensive technologies in mechanical engineering, 2022, no. 7(133), pp. 9–16. DOI: https://doi.org/10.30987/2223-4608-2022-1-7-9-16 (in Russ.).