VITIAZ Petr A., Academician of the NAS of Belarus, D. Sc. in Eng., Prof., Head of the Aerospace Activities Department of the Apparatus; Research Supervisor of the Subprogram “Metallurgy”, National Academy of Sciences of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

TOLSTOY Aliaksandr V., Ph. D. in Phys. and Math., Assoc. Prof., Deputy Head of the Laboratory of Metallurgy in Mechanical Engineering of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Vityaz P.A., Tolstoy A.V. Itogi vypolneniya zadaniy podprogrammy “Metallurgiya” v 2016–2020 gg. i perspektivy na 2021–2025 gg. [The results of the tasks of the subprogram “Мetallurgy” obtained in 2016–2020 and prospects for the years 2021–2025]. Foundry production and metallurgy, 2021, no. 1, pp. 155–165. DOI: https://doi.org/10.21122/1683-6065-2021-1-155-165 (in Russ.).
2. Tolstoy A.V. Razrabotki podprogrammy “Metallurgiya”, vypolnennye v interesakh promyshlennykh predpriyatiy [Developments of the subprogram “Metallurgy” performed in the interests of industrial enterprises]. Mechanics of machines, mechanisms and materials, 2023, no. 2(63), pp. 75–89. DOI: https://doi.org/10.46864/1995-0470-2023-2-63-75-89 (in Russ.).
3. Antonyuk V.E., Sandomirski S.G., Nikiforovich S.O., Rudyi V.V., Timoshenko N.P. Razrabotka osnovnykh trebovaniy k avtomatizirovannomu uchastku termicheskoy obrabotki koltseraskatnogo kompleksa [Development of basic requirements for an automated heat treatment site of a ring‑rolling complex]. Foundry production and metallurgy, 2022, no. 2, pp. 97–103. DOI: https://doi.org/10.21122/1683-6065-2022-2-97-103 (in Russ.).
4. Antonyuk V.E., Sandomirski S.G., Yavorsky V.V., Timoshenko N.P., Budzinskaya A.V. Trebovaniya k vyboru massy i nagrevu zagotovok v avtomatizirovannykh koltseraskatnykh kompleksakh [Requirements for the mass and heating of blanks selection in automated ring-rolling complexes]. Foundry production and metallurgy, 2022, no. 1, pp. 121–129. DOI: https://doi.org/10.21122/1683-6065-2022-1-121-129 (in Russ.).
5. Antonyuk V.E., Sandomirski S.G., Yavorski V.V. Tekhnicheskie osobennosti upravlyaemogo okhlazhdeniya koltsevykh zagotovok posle koltseraskatki [Technical features of controlled cooling of circular workpieces after ring rolling]. Foundry production and metallurgy, 2023, no. 1, pp. 106–111. DOI: https://doi.org/10.21122/1683-6065-2023-1-106-111 (in Russ.).
6. Masukov A.U., et al. Sravnitelnaya otsenka mekhanicheskikh kharakteristik i soprotivleniya ustalosti litogo metalla seriynogo i termouprochnennogo nakonechnika balki peredney osi iz stali 15NMFL karernogo samosvala [Comparative evaluation of mechanical characterictics and fatigue resistance of cast metal of serial and heat-strengthened front axle beams made of 15НМФЛ (15NMFL) steel of mining dump truck]. Aktualnye voprosy mashinovedeniya, 2023, iss. 12, pp. 243–247 (in Russ.).
7. Kudelko I.U., Sidorenko A.G., Sotnikov M.V. Issledovanie prichin razrusheniya krupnogabaritnykh podshipnikov karernykh avtosamosvalov [Research of destruction causes of large-sized bearings of mining dump trucks]. Mechanics of machines, mechanisms and materials, 2023, no. 4(65), pp. 31–37. DOI: https://doi.org/10.46864/1995-0470-2023-4-65-31-37 (in Russ.).
8. Sosnovsky I.A., Belotserkovsky M.A., Kurilyonok A.A., Komarov A.I., Orda D.V. Relaksatsiya ostatochnykh napryazheniy pri okhlazhdenii zagotovki s pokrytiem, nanesennym metodom tsentrobezhnoy induktsionnoy naplavki [Relaxation of residual stresses during cooling of a workpiece with a coating applied by centrifugal induction surfacing method]. Mechanics of machines, mechanisms and materials, 2023, no. 1(62), pp. 55–62. DOI: https://doi.org/10.46864/1995-0470-2023-1-62-55-62 (in Russ.).
9. Sosnovsky I.A., Belotserkovsky M.A., Kurilyonok A.A. Optimizatsiya protsessa naplavki pokrytiy na osnove alyuminievykh splavov tsentrobezhnym induktsionnym metodom [Optimization of the surface process of coatings based on aluminum alloys by the centrifugal induction method]. Advanced methods and technologies of materials development and processing. Volume 2. Technologies and equipment of mechanical and physical and technical processing, 2023, pp. 236–246 (in Russ.).
10. Belotserkovsky M.A., Sosnovsky I.A., Kurilyonok A.A. Induktsionnyy nagrev v protsessakh tsentrobezhnogo naneseniya funktsionalnykh pokrytiy [Induction heating in centrifugal functional coating processes]. Aktualnye problemy prochnosti, 2022, ch. 3, pp. 33–46 (in Russ.).
11. Belotserkovsky M.A., et al. K voprosu optimizatsii protsessa mnogosloynoy tsentrobezhnoy naplavki antifriktsionnykh pokrytiy [On the question of optimization of the process of multilayer centrifugal processing of antifriction coatings]. Progressive technologies and systems of mechanical engineering, 2022, iss. 1(76), pp. 3–12 (in Russ.).
12. Sosnovsky I.A., Kurilyonok A.A., Kuznechik O.O. Study of laws of electromagnetic fluxes during induction surfacing powder layer. Aspects in mining & mineral science, 2022, vol. 9, iss. 2, pp. 1032–1034. DOI: https://doi.org/10.31031/AMMS.2022.09.000710.
13. Komarov A.I., Orda D.V., Sosnovskiy I.A., Kurilyonok A.A. Analiz struktury i tribotekhnicheskikh svoystv legirovannykh pokrytiy na osnove splava sistemy Zn-Al, poluchennykh metodom tsentrobezhnoy induktsionnoy naplavki [Analysis of structure and tribotechnical properties of alloyed coatings on the basis of alloy of the Zn-Al system, created by centrifugal induction surfacing method]. Aktualnye voprosy mashinovedeniya, 2023, iss. 12, pp. 340–345 (in Russ.).
14. Alkhimovich A.V., Lugovtsov I.V. Modelirovanie protsessov termoobrabotki polykh chugunnykh zagotovok pri lite namorazhivaniem [Modeling of heat treatment processes of hollow cast iron billets during freeze casting]. 7 Mezhdunarodnaya nauchno-tekhnicheskaya konferentsiya “Inzhenernoe i ekonomicheskoe obespechenie deyatelnosti transporta i mashinostroeniya” [7th International scientific and technical conference “Engineering and economic support of transport and machine building activities”], Grodno, 2023, pp. 3–7 (in Russ.).
15. Sadokha M.A., Kryutsou A.V. Osobennosti i prakticheskiy opyt polucheniya slozhnoprofilnykh otlivok iz alyuminievykh splavov [Features and practical experience in obtaining complex profile castings from aluminum alloys]. Foundry production and metallurgy, 2023, no. 1, pp. 41–46. DOI: https://doi.org/10.21122/1683-6065-2023-1-41-46 (in Russ.).
16. Slutsky A.G., Sheynert V.A., Kulinich I.L., Huletski N.A., Fedorovich D.S. Osobennosti polucheniya chuguna s sharovidnym grafitom povyshennoy prochnosti [Peculiarities of obtaining cast iron with increased strength nodular graphite]. Metallurgy, 2023, iss. 43, pp. 125–133 (in Russ.).
17. Baranovskiy K.E., Urbanovich N.I., Zhumaev A.A. Uvelichenie resursa raboty detaley iz iznosostoykikh khromistykh chugunov za schet termoobrabotki i konstruktsionnykh legirovannykh staley za schet modifitsirovaniya [Increasing the service life of parts made of wear-resistant chromium cast irons by heat treatment and structural alloy steels by modification]. 2 Mezhdunarodnaya nauchnaya konferentsiya “Nauchnye osnovy ispolzovaniya informatsionnykh tekhnologiy novogo urovnya i sovremennye problemy avtomatizatsii” [2nd International scientific conference “Scientific bases for the use of new level information technologies and modern problems of automation”], Tashkent, 2023, pp. 132–137 (in Russ.).
18. Baranovskiy K.E., Urbanovich N.I. Vliyanie massy rasplava v kovshe na effektivnost modifitsirovaniya konstruktsionnoy legirovannoy stali kompleksnymi modifikatorami [Influence of melt mass in the ladle on the efficiency of modification of structural alloy steel by complex modifiers]. Respublikanskaya nauchno-tekhnicheskaya konferentsiya professorsko-prepodavatelskogo sostava, nauchnykh rabotnikov, doktorantov i aspirantov MTF BNTU “Sovremennye tekhnologii dlya zagotovitelnogo proizvodstva” (v ramkakh 76 nauchno-tekhnicheskoy konferentsii professorsko-prepodavatelskogo sostava, nauchnykh rabotnikov, doktorantov i aspirantov BNTU) [Republican scientific and technical conference of the teaching staff, researchers, doctoral students and postgraduates of the faculty of mechanical and technological engineering of BNTU “Modern technologies for customizing production” (as part of the 76th scientific and technical conference of BNTU faculty, researchers, doctoral students and postgraduates)], Minsk, 2023, pp. 20–22. Available at: https://606.su/V4qB (accessed August 15, 2024) (in Russ.).
19. Korneev S.V., Urbanovich N.I. Kharakteristika produkta pererabotki zhelezo i tsinksoderzhashchikh pylevidnykh otkhodov pri ego pereplave [Characterization of the product of iron and zinc-containing pulverized waste processing during its remelting]. Respublikanskaya nauchno-tekhnicheskaya konferentsiya professorsko-prepodavatelskogo sostava, nauchnykh rabotnikov, doktorantov i aspirantov MTF BNTU “Sovremennye tekhnologii dlya zagotovitelnogo proizvodstva” (v ramkakh 76 nauchno-tekhnicheskoy konferentsii professorsko-prepodavatelskogo sostava, nauchnykh rabotnikov, doktorantov i aspirantov BNTU) [Republican scientific and technical conference of the teaching staff, researchers, doctoral students and postgraduates of the faculty of mechanical and technological engineering of BSTU “Modern technologies for customizing production” (as part of the 76th scientific and technical conference of BSTU faculty, researchers, doctoral students and postgraduates)], Minsk, 2023, pp. 145–147. Available at: https://sul.su/x0kp (accessed August 15, 2024) (in Russ.).