| Authors |
KISELEV M.G., Dr. Techn. Sc., Professor, Head of Department "Device Design and Manufacture", Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
DROZDOV A.V., Cand. Techn. Sc., Associate Professor, Associate Professor of Department "Device Design and Manufacture", Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
GABETS V.L., Cand. Techn. Sc., Associate Professor, Associate Professor of Department "Device Design and Manufacture", Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
BOHDAN P.S., Graduate Student of Department "Device Design and Manufacture", Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
|
| Abstract |
Article is devoted to the experimental evaluation of the energy efficiency of electrical discharges in the process of modifying the working surface of thin steel disks to give it the cutting ability. The main provisions of the methodology of experimental studies, including a description of the device for electrical contact discharge machining (ECoDM) the working surface of the disk and install for evaluation of its cutting power when cutting samples from a variety of materials (wood, organic glass, bone and uglesitall). Presented and analyzed based on the effect of execution of IVF working surface of the disk on the intensity of cutting them samples. Presented and analyzed the data, reflecting the influence of execution modes ECO working surface of the disk on the parameters formed on her hole and spatter at their edges, which together serve as a distinctive design elements, giving it a cutting ability. |
| Bibliography |
- Kiselev M.G., Drozdov A.V., Moskalenko A.V., Bogdan P.S. Effektivnost primeneniia elektrokontaktnoi obrabotki poverkhnosti provolochnogo instrumenta s tceliu pridaniia ei rezhushchei sposobnosti [Efficacy of treatment of the surface electric-wire tool to give it a cutting capacity]. Vestnik PGU [Journal of PGU], 2013, no. 11, pp. 73-77.
- Kiselev M.G., Drozdov A.V., Moskalenko A.V., Bogdan P.S. Vliianie rezhimov elektrokontaktnoi obrabotki iskhodnoi poverkhnosti provolochnogo instrumenta na velichinu sil rezaniia v protcesse raspilivaniia im materialov bez ispolzovaniia
abrazivnoi suspenzii [Effect of electric-processing the original surface of the wire tool by the cutting forces during cutting them materials without the use of abrasive slurry]. Vestnik BRU [Journal of BRU], 2014, no. 1, pp. 15-22.
- Kiselev M.G., Drozdov A.V., Gabetc V.L., Bogdan P.S. Eksperimentalnaia otcenka rezhushchei sposobnosti shtrips s modifitcirovannoi putem elektrokontaktnoi obrabotki rabochei poverkhnostiu [Experimental evaluation of cutting power strips
with modified by treatment with electro worktop]. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and materials], 2014, no. 3, pp. 64-68.
|
