RESULTS OF STUDIES ON OPTIMIZATION OF SEEDER MECHANISM FOR SOWING VEGETABLE SEEDS IN CELL TRAYS

GARBA Muhammad Bello, M. Sc. in Eng., Postgraduate Student, Belarusian State Agrarian Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SHUPILOV Aleksandr A., Ph. D. in Eng., Assoc. Prof., Head of the Department “Standardization and Metrology”, Belarusian State Agrarian Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

Experiments were carried out to optimize the parameters of cell tray vegetable seeder with the aim of adopting it to a specific working conditions. Two major factors, the vacuum pressure in the seeding drum and suck hole diameter were tested on cabbage seeds (Valentina cultivar) and plastic tray with 64 cells at three levels (–1, 0, +1) for each factor using the orthogonal central composite design (CCD) regression experiment. The effects of these factors on the single-seed rate (seed singulation), double-seed rate and empty-seed rate were investigated. The experimental results showed that major factor affecting single-seed rate, empty-seed rate and multi-seed rate was vacuum pressure, while suction hole diameter do not affect double-seed rate. It has been established that the round holes of the seeding drum conform to the round-shaped cabbage seeds to ensure high-quality seeding within the required agrotechnical indices — up to 96.0 % of single-seed sowing, and up to 4 % seeding of cells with double and emptyseed rate. The study determined the optimal parameters of vacuum pressure to be 2,9 kPa and 1,0 mm for suction hole diameter at a constant speed of conveyor belt 2,4 m/min. These parameters provided the basis for design and performance improvement of the tray vegetable seeding mechanism.

vacuum pressure, hole diameter, seed-metering performance, cabbage, seeding mechanism

• deFeijter A. Importance of Nursery Raising in Vegetable Production. Proc. Conf. “Promoting Innovation and Trade in Horticulture”. Netherlands, 2015, p. 3.
• Hui P.S., Liang S., Chen J., Kai Y.L., Jun H.W. Summary of the Developing Status of Greenhouse Tray Seeder and Seed Metering Device. Applied Mechanics and Materials, 2013, vol. 387, pp. 271–279.
• Kachman S.D., Smith J.A. Alternative Measures of Accuracy in Plant Spacing for Planters Using Single Seed Metering. Transaction of the ASAE, 1995, no. 38(2), pp. 378–387.
• Liao Q.X., Gao H.W., Zang Y. Experimental Study on the Cell of the Horizontal Plate Precision Meter for Corn Seed. Transaction of the CSAE, 2003, no. 19(2), pp. 109–113 (in Chinese with English abstract).
• Liao Q.X., Gao H.W. Experimental Study on Corn Seed Damaging in a Horizontal Plate Precision Metering. Transaction of the CSAE, 2003; 34(4): 57–59 (in Chinese with English abstract).
• Yu J.Q., Ma C.I., Yang H.K., Ma X. Study on the Cell of the Combination inner-cell corn Precision Seed-Metering Device. National Science Journal of Jilin University of Technology, 2000, no. 30(1), pp. 16–20 (in Chinese with English abstract).
• Yu J.Q., Ma C.I., Zuo C.C. Analysis of the Clearing Process of Seeds in Corn Precision Metering Device with Concave Metering Inner-cell. Transaction of the CSAE, 2000, no. 31(5), pp. 35–47 (in Chinese with English abstract).
• Yu J.Q., Ma C.I., Zuo C.C., Wang W.I. Experiment Study on Precision Maize Seed Metering Device of Step type inner Cell. Transaction of the CSAE, 1997, no. 13(4), pp. 94–97 (in Chinese
  with English abstract).
• Xia H., Li Z., Zhen W. Design and Experiment of the Vegetable Seed Metering Device in Pneumatic Plate-Type. Transaction of the CSAM, 2010, no. 41(6), pp. 56–60.
• Xia I.M.,Wang X.Y., Geng D.Y. Precision Seed-Metering Device for pelleted corn Seeds. Transaction of the CSAM, 2011, no. 42(6), pp. 53–457 (in Chinese with English abstract).
• Afify M.T., El-haddad Z.A., Hassan G.E., Shaaban Y.A. Mathematical Model for Predicting Vacuum Pressure of Onion Seeds Precision Seeder. Misr J. Ag. Eng., no. 26(4), pp. 1776–1799.
• Gaikwad B.B., Sirohi N.P.S. Design of a Low-cost Pneumatic Seeder for Nursery Plug Trays. Biosystems Engineering, 2008, no. 99(3), pp. 322–329.
• Autko A.A., Garba M.B., Shupilov A.A. Ustanovka vyseva semyan ovoschnykh kultur v kasseti dlya proizvodstva rassadi [Planting of seeds of vegetable crops in cassettes for the production of seedlings]. Sbornik nauchnykh trudov UO “GGAU”
  [Collection of scientific works of the Grodno State Agrarian University], Grodno, 2016, pp. 23–28.
• Shupilov A.A, Garba M.B. Vliyanie razredzeniya v vysevayuschem barabane na ravnomernost vyseva semyan ovoschnykh kultur v kasseti [The effect of deflation in the sowing drum on the uniformity of sowing of vegetable seeds in cassettes]. Sbornik nauchnykh statey Mezddunarodnoy nauchno-prakticheskoy konferentsii [Collection of scientific articles of the International Scientific and Practical Conference], Minsk, 2016, BGATU, pp. 99–103.
• Garba M.B. Opredelenie osnovnykh parametrov semyan ovoschnykh kultur, vliyayuschikh na protsess vyseva v kasseti barabanno-vakuumnym apparatom [Determination of the main parameters of the seeds of vegetable crops that affect the process
  of sowing in cassettes by a drum-vacuum apparatus]. Sbornik nauchnykh materialov Mezddunarodnoy nauchno-prakticheskoy konferentsii [Collection of scientific articles of the International Scientific and Practical Conference], Smolensk, 2016, FGBOU VO Smolenskaya GSHA, pp. 231–234.