Smart Search 


2_2021_sen_4

Title of the article OPTIMIZATION OF THE PROCESS OF MULTILAYER CENTRIFUGAL INDUCTION SURFACING OF COATINGS BASED ON ALUMINUM ALLOYS
Authors

BELOTSERKOVSKY Мarat A., D. Sc. in Eng., Prof., Head of the Laboratory of Gas-Thermal Methods of Hardening of Machine Parts, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

KURILYONOK Artem A., Ph. D. in Eng., Senior Researcher of the Laboratory of Gas-Thermal Methods of Hardening of Machine Parts, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

BELYAVIN Klimentiy E., D. Sc. in Eng., Prof., Professor of the Department “Machines and Technology of Metal Forming” named after S.I. Gubkin, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SOSNOVSKY Igor A., Senior Researcher of the Laboratory of Gas-Thermal Methods of Hardening of Machine Parts, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICAL ENGINEERING MATERIALS AND TECHNOLOGIES
Year 2021
Issue 2
Pages 35–41
Type of article RAR
Index UDK 621.793
DOI https://doi.org/10.46864/1995-0470-2021-2-55-35-41
Abstract As a result of the conducted research, using the methods of mathematical planning of the experiment, the optimization of the process of multilayer centrifugal induction surfacing of antifriction coatings based on aluminum alloys was performed, which made it possible to develop a mathematical model and determine the optimal range of values of technological modes. The dependences of the minimum wear rate of the coating material Iq (mg/m) on the parameters of multilayer induction centrifugal surfacing of aluminum alloy coatings are established. The main factors affecting the wear rate of the coating were the heating temperature of the part T (°C), the time of the isothermal exposure t (min) and the speed of rotation of the part n (rpm). Based on the results of computational and experimental modeling, it is shown that in order to obtain the optimal wear intensity of the aluminum alloy coating material, the parameters of the multilayer centrifugal induction surfacing process should be as follows: the rotation speed of the part n = 1,750–1,875 rpm, the heating temperature of the part T = 775–800 °C, the isothermal exposure time t = 7–8 min.
Keywords optimization, mathematical planning methods, mathematical model, antifriction coatings, aluminum-based alloys, lead powder sublayer, multilayer centrifugal induction surfacing
  You can access full text version of the article.
Bibliography
  1. Vityaz P.A., Ivashko A.S., Ilyushchenko A.F., Shevtsov A.I., Manelo E.D. Teoriya i praktika naneseniya zashchitnykh pokrytiy [Theory and practice of applying protective coatings]. Minsk, Belaruskaya dumka Publ., 1998. 583 p. (in Russ.).
  2. Belyavin K.E., Mazyuk V.V., Minko D.V., Sheleg V.K. Teoriya i praktika elektroimpulsnogo spekaniya poristykh poroshkovykh materialov [Theory and practice of electro-pulse sintering of porous powder materials]. Minsk, Remiko Publ., 1997. 180 p. (in Russ.).
  3. Tkachev V.N., Fishteyn B.M., Kazintsev N.V., Aldyrev D.A. Induktsionnaya naplavka tverdykh splavov [Induction surfacing of hard alloys]. Moscow, Mashinostroenie Publ., 1970. 184 p. (in Russ.).
  4. Slukhotskiy A.E., Ryskin S.E. Induktory dlya induktsionnogo nagreva [Inductors for induction heating]. Leningrad, Energiya Publ., 1974. 70 p. (in Russ.).
  5. Dorozhkin N.N., Kashitsin L.P., Abramovich T.M., Kirpichenko I.A. Tsentrobezhnoe pripekanie poroshkovykh pokrytiy pri peremennykh silovykh vozdeystviyakh [Centrifugal sintering of powder coatings with varying force effects]. Minsk, Nauka i tekhnika Publ., 1993. 160 p. (in Russ.).
  6. Belyavin K.E., Sosnovskiy I.A., Kurilyonok A.A. Inzhenernye metody rascheta temperaturno-vremennykh parametrov v protsessakh tsentrobezhnoy induktsionnoy naplavki pokrytiy [Engineering methods for calculating temperature and time parameters in the processes of centrifugal induction surfacing of coatings]. Perspektivnye materialy i tekhnologii. Tom 2, 2019, ch. 1, pp. 5–18 (in Russ.).
  7. Sosnovsky I.A., Gafo Yu.N. Termicheskie parametry tsentrobezhnogo induktsionnogo naneseniya poroshkovykh pokrytiy [Thermal parameters of centrifugal induction powder coating]. Inzhenerno-fizicheskiy zhurnal, 2011, vol. 84, no. 6, pp. 1135–1142 (in Russ.).
  8. Belotserkovsky M.A., Sosnovsky I.A., Kurilyonok A.A., Kuznechik O.O. Modelirovanie protsessov induktsionnoy naplavki poroshkovykh pokrytiy, soderzhashchikh nanorazmernye modifikatory [Modeling of the process of induction welding powder surfaces containing nanodimentional modifiers]. Vestnik PGU, Seriya B, 2016, no. 3, pp. 66–74 (in Russ.).
  9. Sosnovsky I.A., Belotserkovsky M.A., Gafo Yu.N., Kurilyonok A.A. Tekhnologicheskie protsessy i oborudovanie dlya naneseniya pokrytiy tsentrobezhnym metodom s ispolzovaniem dvukhstupenchatogo induktsionnogo nagreva [Technological processes and equipment for coating application by centrifugal method using two-stage induction heating]. Aktualnye voprosy mashinovedeniya, 2012, iss. 1, pp. 401–405 (in Russ.).
  10. Gafo Yu.N., Sosnovskii I.A. Thermal parameters for centrifugal induction sintering of powder. Powder metallurgy and metal ceramics, 2009, vol. 48, no. 1–2, pp. 105–111. DOI: https://doi.org/10.1007/s11106-009-9087-x.
  11. Sosnovskiy I.A., Kurilenok A.A., Belotserkovskiy M.A., Kuznechik O.O., Grigorev E.G. Induction centrifugal surfacing of the charge based on tin bronze powders with the addition of finely dispersed boehmite. Welding international, 2016, vol. 30, no. 9, pp. 736–739. DOI: https://doi.org/10.1080/09507116.2016.1143590.
  12. Komarov A.I., Sosnovskiy I.A., Orda D.V., Kurilyonok A.A., Iskandarova D.O. Vliyanie olova v materiale podsloya na strukturu Al-Si splava, naplavlyaemogo tsentrobezhno induktsionnym metodom [Influence of tin in underlayer material on Al-Si alloy structure deposited using centrifugal induction method]. Mechanics of machines, mechanisms and materials, 2019, no. 3(48), pp. 77–84 (in Russ.).
  13. Belotserkovsky M.A., Komarov A.I., Sosnovsky I.A., Orda D.V., Kurilyonok A.A., Iskandarova D.O. Tekhnologicheskie osobennosti polucheniya bimetallicheskikh vtulok s antifriktsionnym pokrytiem iz splava AK12 [Technological features of obtaining bimetallic sleeves with antifriction coating from AlSi12 alloy] Aktualnye voprosy mashinovedeniya, 2019, iss. 8, pp. 320–324 (in Russ.).
  14. Spiridonov A.A. Planirovanie eksperimenta pri issledovanii tekhnologicheskikh protsessov [Planning an experiment in the study of technological processes]. Moscow, Mashinostroenie Publ., 1981. 184 p. (in Russ.).