Smart Search 


2_2022_sen_9

Title of the article ON MODELLING OF GEOMECHANICAL BEHAVIOR OF SUPPORTED ROCK MASS IN THE VICINITY OF UNDERGROUND STRUCTURES
Authors

ZHURAVKOV Michael A., D. Sc. in Phys. and Math., Prof., Head of Theoretical and Applied Mechanics Department, Belarusian State University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

LAPATSIN Siarhei N., Assistant of Theoretical and Applied Mechanics Department, Belarusian State University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

RIPKA Kirill A., Junior Researcher Trainee of Applied Mechanics Laboratory, Belarusian State University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section GEOMECHANICS
Year 2022
Issue 2(59)
Pages 67–76
Type of article RAR
Index UDK 539.3; 622.281.74+51-74
DOI https://doi.org/10.46864/1995-0470-2022-2-59-67-76
Abstract The paper presents a method of modelling the mechanical behavior of supported rock mass, in the vicinity of complex underground structures. The method is based on calculations of the effective mechanical properties of the bolted rock mass. The algorithm is based on the effective properties of a bolted rock unit that are obtained by conducting a series of numerical experiments. These experiments allow to define the values of correction factors, which, in turn, determine the difference in mechanical behavior of supported and non-supported rock mass. Such approach makes it possible to calculate the stress-strain state of complex space underground structures precisely without direct considering of the roof bolting elements. The application of the proposed method is demonstrated on the example of an applied problem of the strength assessment of geotechnical system “underground equipment chamber — enclosing potash rock mass”. The results of the research have a wide range of applications since they can significantly simplify and speed up the process of strength and stability calculations of bolted underground structures and make the results more accurate.
Keywords roof bolting, space underground structures, supported rock mass, finite element method, effective mechanical properties
  You can access full text version of the article.
Bibliography
  1. Zhuravkov M.A. Matematicheskoe modelirovanie deformatsionnykh protsessov v tverdykh sredakh (na primere zadach mekhaniki gornykh porod i massivov) [Mathematical modeling of deformation processes in solid media (on the example of rock and mass mechanics problems)]. Moscow, Belorusskiy gosudarstvennyy universitet Publ., 2002. 456 p. (in Russ.).
  2. Vasilyev L.M., Vasilyev D.L., Malich N.G., Angelovskiy A.A. Mekhanika obrazovaniya form razrusheniya obraztsov gornykh porod pri ikh szhatii [Mechanics of formation of destruction forms of rock samples during their compression]. Dnipro, IMApress Publ., 2018. 176 p. (in Russ.).
  3. Norel B.K., Petrov Yu.V., Selyutina N.S. Energeticheskie i vremennye kriterii kharakteristiki predelnogo sostoyaniya gornykh porod [Energy and time criteria for the characteristics of the limit state of rocks]. Saint Petersburg, Sankt-Peterburgskiy gosudarstvennyy universitet Publ., 2018. 150 p. (in Russ.).
  4. Koniezky H., Ismael M.A. Failure criteria for rocks – an introduction. Friberg, Geotechnical Institute TU Bergakademie Freiberg, 2017. 20 p.
  5. Revuzhenko A.F. Rock failure criteria based on new stress tensor invariants. Journal of mining science, 2014, vol. 50, iss. 3, pp. 437–442. DOI: https://doi.org/10.1134/S1062739114030053.
  6. Chheng C., Likitlersuang S. Underground excavation behaviour in Bangkok using three-dimensional finite element method. Computers and geotechnics, 2018, vol. 95, pp. 68–81. DOI: https://doi.org/10.1016/j.compgeo.2017.09.016.
  7. Chermahini A.G., Tahghighi H. Numerical finite element analysis of underground tunnel crossing an active reverse fault: a case study on the Sabzkouh segmental tunnel. Geomechanics and geoengineering, 2019, vol. 14, iss. 3, pp. 155–166. DOI: https://doi.org/10.1080/17486025.2019.1573323.
  8. Liu J., Nan Z., Yi P. Validation and application of three-dimensional discontinuous deformation analysis with tetrahedron finite element meshed block. Acta mechanica sinica, 2012, vol. 28, iss. 6, pp. 1602–1616. DOI: https://doi.org/10.1007/s10409-012-0153-0.
  9. Wu Z., Ma L., Fan L. Investigation of the characteristics of rock fracture process zone using coupled FEM/DEM method. Engineering fracture mechanics, 2018, vol. 200, pp. 355–374. DOI: https://doi.org/10.1016/j.engfracmech.2018.08.015.
  10. Ning Y.-J., An X.-M., Lü Q., Ma G.-W. Modeling rock failure using the numerical manifold method followed by the discontinuous deformation analysis. Acta mechanica sinica, 2012, vol. 28, iss. 3, pp. 760–773. DOI: https://doi.org/10.1007/s10409-012-0055-1.
  11. Instruktsiya po okhrane i krepleniyu gornykh vyrabotok na Starobinskom mestorozhdenii [Instructions for the protection and fastening of mine workings at the Starobinskoye deposit]. Soligorsk, SIPR Publ. 2018. 206 p. (in Russ.).
  12. Zhua W.C., Wei J., Niu L.L. 2D numerical simulation on excavation damaged zone induced by dynamic stress redistribution. Tunnelling and underground space technology, 2014, vol. 43, pp. 315–326. DOI: https://doi.org/10.1016/j.tust.2014.05.023.
  13. Gao F., Stead D., Kang H. Numerical simulation of squeezing failure in a coal mine roadway due to mining-induced stresses. Rock mechanics and rock engineering, 2015, vol. 48, iss. 4, pp. 1635–1645. DOI: https://doi.org/10.1007/s00603-014-0653-2.
  14. Demin V.F., Nemova N.A., Demina T.V. Analiticheskoe modelirovanie geomekhanicheskikh processov v prikonturnom massive gornykh vyrabotok [Analytical modeling of geomechanical processes in the marginal array mining]. Journal of Siberian Federal University. Engineering & technologies, 2015, vol. 8, no. 1, pp. 74–97 (in Russ.).
  15. Dyomin V.F., Bajmuldin M.M., Demina T.V. Ustanovlenie oblasti primeneniya ankernoy krepi v gornykh rabotakh [Factors influencing effectiveness of roof bolting in underground workings]. Mining informational and analytical bulletin, 2015, no. 12, pp. 1–8 (in Russ.).
  16. Zakharov V.N., Trofimov V.A., Filippov Yu.A. Chislennoe modelirovanie ankernogo krepleniya kontura vyrabotki pri reologicheskom deformirovanii porod [Numerical modeling of rock bolt support in case of rheological behavior of rock mass in deformation]. Fiziko-tekhnicheskie problemy razrabotki poleznykh iskopaemykh, 2021, no. 6, pp. 6–17 (in Russ.).
  17. Zhuravkov M.A., Lapatsin S.N. Geomekhanika glubokikh podzemnykh sooruzheniy [Geomechanics of deep underground structures]. Materialy 4 mezhdunarodnogo foruma po khimicheskim tekhnologiyam i neftegazopererabotke “Neftekhimiya – 2021” [Proc. 4th International scientific and technical forum on chemical technologies and oil and gas processing “Petrochemistry – 2021”], 2021, pp. 280–283. (in Russ.).
  18. Zhuravkov M.A., Hvesenya S.S., Lapatsin S.N. Durability analysis of underground structures based on various creep models of the enclosing salt rock massif. E3S Web of Conferences, 2020, vol. 201. DOI: https://doi.org/10.1051/e3sconf/202020101007.
  19. Mehranpour M.H., Kulatilake P.H.S.W. Comparison of six major intact rock failure criteria using a particle flow approach under true-triaxial stress condition. Geomechanics and geophysics for geo-energy and geo-resources, 2016, vol. 2, iss. 4, pp. 203–229. DOI: https://doi.org/10.1007/s40948-016-0030-6.
  20. Gao H., Zheng Y.R. Discussion on strength criteria. Materials research innovations, 2011, vol. 15, sup. 1, pp. 504–507. DOI: https://doi.org/10.1179/143307511X12858957676191.