Smart Search 


4_2022_sen_10

Title of the article ON THE CHOICE OF MODERN STRUCTURAL METAL MATERIAL FOR HIGH-DUTY MECHANICAL SYSTEMS. PART 2
Authors

SOSNOVSKIY Leonid A., D. Sc. in Eng., Prof., Professor of the Department “Locomotives”, Belarusian State University of Transport, Gomel, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section TRIBO-FATIGUE SYSTEMS MECHANICS
Year 2022
Issue 4(61)
Pages 89–96
Type of article RAR
Index UDK 669.13.018; 669.131.7
DOI https://doi.org/10.46864/1995-0470-2022-4-61-86-96
Abstract It is shown that when solving the problems of assurance of quality, reliability, competitiveness of high-duty mechanical systems, metal and a complex of its mechanical and service properties are of fundamental importance. Steel cast iron MONICA (Mo–Ni–Cu) (patent BY, no. 15617) exhibits an unconventional and unique ability to lose brittleness (increase viscosity) with increasing strength. In terms of service properties, it is not inferior to alloyed heat-strengthened steels. This makes it possible to recommend it for the manufacture of many and various highly loaded parts and assemblies of modern technology. The article provides several examples of the effective use of MONICA for the manufacture of cast knives for cutting and chopping devices of forage harvesters (Hi-Tech), large-sized gear wheels with a diameter of 500 mm for final drives of agricultural combines (know-how), as well as experimental cast rails for railway transport (Hi-Tech). A complex of laboratory and full-scale tests has convincingly proved that one brand of the new structural material fully provides the required operational reliability of many and different tribo-fatigue systems, the performance of which is determined by many and different criteria (fatigue, wear, friction, crack resistance, etc.) under the action of high repetitive variables and shock-cyclic loads. This determines the unconditional efficiency and competitiveness of critical mechanical systems (tribo-fatigue systems) for modern machines and equipment.
Keywords metal; mechanical and service properties; limits of strength, fatigue, crack resistance; wear resistance; stress-strain and limit states; modification; microstructure; MONICA
  You can access full text version of the article.
Bibliography
  1. Sosnovskiy L.A., Vitiaz P.A., Gapanovich V.A., Psyrkov N.V., Makhutov N.A. Chugun i stal v tribofaticheskikh sistemakh sovremennykh mashin i oborudovaniya [Iron and steel in tribo-fatigue systems for modern machinery and equipment]. Mechanics of machines, mechanisms and materials, 2014, no. 4(29), pp. 5–20 (in Russ.).
  2. Psyrkov N.V., Zamyatnin V.O. Ekspluatatsionnaya stoykost nozhey rezhushchikh barabanov kormouborochnykh kombaynov [Operational stability of knives of cutting drums of forage harvesters KVK-800]. Mekhanika-2011, 2011, vol. II, pp. 85–91 (in Russ.).
  3. Sherbakov S.S. Napryazhenno-deformirovannoe sostoyanie i povrezhdaemost tribofaticheskoy sistemy “prizhim — nozh — opora” rezhushchego instrumenta kombayna [Stress-strain state and damage
    of tribo-fatigue system clamp-knife-base of harvester cutting instrument]. Mechanics of machines, mechanisms and materials, 2012, no. 2(19), pp. 75–80 (in Russ).
  4. Psyrkov N.V., Kvitanov A.A., Zamyatnin V.O. Opyt vnedreniya spetsialnogo chuguna marki VChTG dlya izgotovleniya nozhey rezhushchikh barabanov kormouborochnoy tekhniki [Experience in introducing special cast iron of VChTG brand for the manufacture of knives of cutting drums of fodder harvesting equipment]. Aktualnye voprosy mashinovedeniya, 2013, iss. 2, pp. 388–390 (in Russ.).
  5. Komissarov V.V., Zamyatnin V.O., Taranova E.S. Krupnogabaritnye zubchatye kolesa iz vysokoprochnogo chuguna [Largesized gears made of high-strength cast iron]. Materialy konferentsii “Zhivuchest i konstruktsionnoe materialovedenie” [Proc. conference “Survivability and structural materials science”]. Moscow, 2012, p. 26 (in Russ.).
  6. Psyrkov N.V., Komissarov V.V., Tyurin S.A., Taranova E.S. Opytnye krupnogabaritnye zubchatye kolesa dlya bortovykh reduktorov selskokhozyaystvennykh kombaynov iz spetsialnogo chuguna marki VChTG [Experimental large-sized gears for side gearboxes of agricultural combines made of special cast iron of the VChTG brand]. Aktualnye voprosy mashinovedeniya, 2013, iss. 2, pp. 391–394 (in Russ.).
  7. Komissarov V.V., Taranova E.S., Zamyatnin V.O., Psyrkov N.V., Sosnovskiy L.A. Sravnitelnaya otsenka rabotosposobnosti krupnogabaritnykh zubchatykh koles iz spetsialnogo chuguna marki VChTG i stali [Comparative assessment of the performance of large-sized gears made of special cast iron of VChTG and steel grade]. Tezisy dokladov 2 Mezdunarodnoy konferentsii SSMS-2014 “Zhivuchest i konstruktsionnoe materialovedenie” [Report abstracts of the 2nd International conference SSMS-2014 “Survivability and structural materials science”]. Moscow, 2014, p. 68 (in Russ.).
  8. Komissarov V.V., Taranova E.S., Drobyshevskiy P.S., Zamyatnin V.O., Tyurin S.A., Sosnovskiy L.A. Ob opyte izgotovleniya i ekspluatatsii zubchatykh koles iz novogo konstruktsionnogo materiala “MONIKA” [About experience of manufacture and maintenance of gears from the new structural material “MONICA”]. Vestnik IzhGTU imeni M.T. Kalashnikova, 2017, vol. 20, no. 2, pp. 107–112 (in Russ.).
  9. Sosnovskiy L.A., Matvetsov V.I., Sherbakov S.S. O litykh relsakh iz novogo konstruktsionnogo materiala [On cast rails made of new structural material]. Nauka i obrazovanie transportu, 2016, no. 2, pp. 200–204 (in Russ.).
  10. Sosnovskiy L.A., Komissarov V.V., Matvetsov V.I., Miroshnikov N.E. Novyy konstruktsionnyy material dlya zheleznodorozhnykh relsov: mekhanicheskie i sluzhebnye svoystva [New structural material for iron and road rails: mechanical and service properties]. Bulletin of BSUT: science and transport, 2014, no. 2(29), pp. 77–82 (in Russ.).
  11. Matvetsov V.I., Miroshnikov N.E., Sosnovskiy L.A. Naturnye ispytaniya tyazhelykh zheleznodorozhnykh relsov iz chuguna VChTG [Full-scale tests of heavy railway rails made of cast iron VChTG]. Tezisy dokladov 2 Mezdunarodnoy konferentsii SSMS-2014 “Zhivuchest i konstruktsionnoe materialovedenie” [Report abstracts of International conference SSMS-2014 “Survivability and structural materials science”]. Moscow, 2014, p. 41 (in Russ.).
  12. Matvetsov V.I., Miroshnikov N.E. Opyt izgotovleniya i ispytaniy relsov dlinoy 6.5 m iz spetsialnogo chuguna [Experience in the manufacture and testing of 6.5 m long rails made of special cast iron]. Aktualnye voprosy mashinovedeniya, 2013, iss. 2, pp. 405–407 (in Russ.).
  13. Sosnovskiy L.A., Matvetsov V.I., Psyrkov N.V. Ob izgotovlenii zheleznodorozhnykh relsov iz vysokoprochnogo chuguna [On the manufacture of railway rails from high-strength cast iron]. Trudy Mezhdunarodnoy nauchno-prakticheskoy konferentsii, posvyashchennoy 100-letiyu professora M.A. Frishmana “Problemy vzaimodeystviya puti i podvizhnogo sostava” [Proc. International scientific and practical conference dedicated to the 100th anniversary of Professor M.A. Frishman “Problems of interaction of track and rolling stock”]. Dnipropetrovsk, 2013, pp. 54–55 (in Russ.).
  14. Oding I.A. Dopuskaemye napryazheniya v mashinostroenii i tsiklicheskaya prochnost metallov [Allowable stresses in mechanical engineering and cyclic strength of metals]. Moscow, Mashgiz Publ., 1962. 260 p. (in Russ.).
  15. Oleynik N.V. Vynoslivost detaley mashin [Endurance of machine parts]. Kiev, Tekhnika Publ., 1979. 199 p. (in Russ.).
  16. Pochtennyy E.K. Prognozirovanie dolgovechnosti i diagnostika ustalosti detaley mashin [Predicting durability and diagnosing fatigue of machine parts]. Minsk, Nauka i tekhnika Publ., 1982. 246 p. (in Russ.).
  17. State Standard 10791-2011. Kolesa tselnokatnye. Tekhnicheskie usloviya [All-rolled wheels. Specifications]. Moscow, Standartinform Publ., 2011. 27 p. (in Russ.).
  18. Getmanova M.E., Ilyukhin D.S., Nikulin A.N., Filippov G.A. Osobennosti khimicheskogo sostava i svoystv stali litykh i tselnokatanykh zheleznodorozhnykh koles [Peculiarities of chemical composition and properties of steel cast and all-rolled railway wheels]. Stal, 2017, no. 1, pp. 59–66 (in Russ.).
  19. Kudryavtsev I.V., Naumchenkov N.E., Savvina N.M. Ustalost krupnykh detaley mashin [Fatigue of large parts of machines]. Moscow, Mashinostroenie Publ., 1981. 237 p. (in Russ.).