Smart Search 


1_2023_sen_8

Title of the article RELAXATION OF RESIDUAL STRESSES DURING COOLING OF A WORKPIECE WITH A COATING APPLIED BY CENTRIFUGAL INDUCTION SURFACING METHOD
Authors

SOSNOVSKY Igor A., Senior Researcher of the Laboratory of Gas-Thermal Methods of Machine Component Hardening of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

BELOTSERKOVSKY Marat A., D. Sc. in Eng., Prof., Head of the Laboratory of Gas-Thermal Methods of Machine Component Hardening of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

KURILYONOK Artem A., Ph. D. in Eng., Senior Researcher of the Laboratory of Gas-Thermal Methods of Machine Component Hardening of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

KOMAROV Aleksandr I., Ph. D. in Eng., Head of the Laboratory of Modification Techniques of Structural Materials of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ORDA Dmitriy V., Researcher of the Laboratory of Modification Techniques of Structural Materials of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICAL ENGINEERING MATERIALS AND TECHNOLOGIES
Year 2023
Issue 1(62)
Pages 55–62
Type of article RAR
Index UDK 621.793
DOI https://doi.org/10.46864/1995-0470-2023-1-62-55-62
Abstract As a result of a theoretical analysis of the cooling process of parts with deposited coatings applied by the method of centrifugal induction surfacing, the patterns of formation of residual stresses are established, taking into account relaxation. It is shown that a decrease in the cooling rate after surfacing makes it possible to reduce the level of residual stresses due to the relaxation phenomenon. Calculation relations are derived that allow predicting the permissible value of residual stresses depending on the required adhesive strength. As the analysis of the ratios obtained shows, the reduction of residual stresses in the resulting coatings due to their relaxation can be achieved by reducing the cooling rate or, accordingly, increasing its time. In the technological process of induction surfacing, a two-stage cooling mode of the workpiece was used; at the first stage, cooling is carried out at the maximum possible rate. If the temperature stresses reach the maximum allowable value τmax, the pairing condition for the transition from the previous cooling stage to the next one is the equality τmax = τi, where τi is determined from the equations derived in the work. In this case, one should be guided by the observance of the condition τi < τc, where τc is the theoretical adhesive strength of coatings in the absence of residual stresses. An example of the practical use of the twostage cooling after the process of applying coatings by centrifugal induction surfacing on the bushings of tamping blocks of a STS track machine is given.
Keywords coatings, residual stresses, relaxation, centrifugal induction surfacing, adhesion strength, bimetallic parts, tamping block bushings, STS track machine
  You can access full text version of the article.
Bibliography
  1. Belotserkovsky M.A., Sosnovsky I.A., Kurilyonok A.A. Induktsionnyy nagrev v protsessakh tsentrobezhnogo naneseniya funktsionalnykh pokrytiy [Induction heating in centrifugal functional coating processes]. Aktualnye problemy prochnosti, 2022, ch. 3, pp. 33–46 (in Russ.).
  2. Belotserkovsky M.A., Kurilyonok A.A., Belyavin K.E., Sosnovsky I.A. Optimizatsiya protsessa mnogosloynoy tsentrobezhnoy induktsionnoy naplavki pokrytiy na osnove alyuminievykh splavov [Optimization of the process of multilayer centrifugal induction surfacing of coatings based on aluminum alloys]. Mechanics of machines, mechanisms and materials, 2021, no. 2(55), pp. 35–41 (in Russ.).
  3. Belyavin K.E., Belotserkovsky M.A., Sosnovsky I.A., Kurilyonok A.A. Tekhnologiya naneseniya pokrytiy na detali uzlov treniya putevykh mashin tsentrobezhnym induktsionnym metodom [Technology of applying coatings on parts of friction units of track machines by centrifugal induction method]. Tezisy dokladov mezhdunarodnoy nauchno-tekhnicheskoy konferentsii “Perspektivnye napravleniya razvitiya tekhnologii mashinostroeniya i metalloobrabotki. Tekhnologiya – Oborudovanie – Instrument – Kachestvo” [Theses of the international scientific and technical conference “Promising areas of development of mechanical engineering and metalworking technology. Technology — Equipment — Tools — Quality”]. Minsk, 2021, pp. 30–32 (in Russ.).
  4. Belotserkovsky M.A., Belyavin K.E., Sosnovsky I.A., Kurilyonok A.A. Tekhnologicheskie skhemy i universalnoe oborudovanie dlya tsentrobezhnogo induktsinnogo formovaniya poroshkovykh pokrytiy [Technological scheme and design of universal equipment for centrifugal induction molding of powder coatings]. Progressive technologies and systems of mechanical engineering, 2020, iss. 3(70), pp. 12–21 (in Russ.).
  5. Belyavin K.E., Sosnovsky I.A., Khudoley A.L. Induktsionnyy nagrev v protsessakh tsentrobezhnogo naneseniya pokrytiy [Induction heating in the process of centrifugal coating deposition]. Vestnik of the foundation for fundamental research, 2013, no. 3(36), pp. 70–87 (in Russ.).
  6. Kashitsin L.P., Zhornik A.I., Kirpichenko I.A. Zakonomernosti okhlazhdeniya detali s vnutrennim pokrytiem, poluchennym metodom tsentrobezhnogo induktsionnogo pripekaniya [Patterns of cooling of a part with an internal coating obtained by centrifugal induction sintering]. Proceedings of the Academy of Sciences of BSSR. Physical-technical series, 1995, no. 1, pp. 19–26 (in Russ.).
  7. Dorozhkin N.N., Zhornik A.I., Kashitsin L.P., Kikhtenko S.N. Napryazhennoe sostoyanie tsilindricheskikh detaley s vnutrennim pokrytiem, poluchennym metodom tsentrobezhnogo pripekaniya [Stress state of cylindrical parts with an internal coating obtained by centrifugal sintering]. Proceedings of the Academy of Sciences of BSSR. Physical-technical series, 1990, no. 3, pp. 63–69 (in Russ.).
  8. Holister G.S., Thomas С. Fiber reinforced materials. Amsterdam, London, New York, Elsevier Publishing Co. Ltd., 1966. 154 p.
  9. Gafo Yu.N., Sosnovsky I.A., Belotserkovsky M.A. K voprosu relaksatsii ostatochnykh napryazheniy posle naneseniya poroshkovykh pokrytiy [On the issue of relaxation of residual stresses after the application of powder coatings]. Vesnik of Yanka Kupala State University of Grodno. Series 6. Engineering science, 2013, no. 1(145), pp. 64–68 (in Russ.).
  10. Belotserkovsky M.A., Sosnovsky I.A., Belyavin K.E., Kurilyonok A.A. Teoreticheskie aspekty protsessa formirovaniya kontaktnoy prochnosti mezhdu nanosimym pokrytiem i osnovoy [Theoretical aspects of the process of forming the contact strength between the applied coating and substrate]. Progressive technologies and systems of mechanical engineering, 2019, iss. 3(66), pp. 3–8 (in Russ.).
  11. Ilyushin A.A., Pobedrya B.E. Osnovy matematicheskoy teorii termovyazkouprugosti [Fundamentals of the mathematical theory of thermoviscoelasticity]. Moscow, Nauka Publ., 1970. 280 p. (in Russ.).
  12. May V.K., Denisenko E.T. Goryachee pressovanie metallicheskikh poroshkov [Hot pressing of metal powders]. Powder metallurgy, 1968, no. 10, pp. 27–32 (in Russ.).
  13. Belyavin K.E., Komarov A.I., Sosnovsky I.A., Orda D.V. Struktura i tribotekhnicheskie svoystva alyuminievykh pokrytiy, poluchaemykh metodom tsentrobezhnoy induktsionnoy naplavki [Structure and tribotechnical properties of aluminum coatings obtained by centrifugal induction surfacing]. Perspektivnye materialy i tekhnologii, 2021, ch. 11, pp. 140–155 (in Russ.).
  14. Belotserkovsky M.A., Komarov A.I., Sosnovsky I.A., Orda D.V., Kurilyonok A.A., Iskandarova D.O. Sposob naneseniya dvukhsloynogo pokrytiya na vnutrennyuyu poverkhnost detali [A method of applying a two-layer coating on the inner surface of the part]. Patent BY, no. 23365, 2021 (in Russ.).
  15. Belotserkovsky M.A., Komarov A.I., Sosnovsky I.A., Orda D.V., Kurilyonok A.A., Iskandarova D.O. Izuchenie vliyaniya tekhnologicheskikh rezhimov mnogosloynoy induktsionnoy naplavki na strukturoobrazovanie antifriktsionnykh pokrytiy iz splava AK12 [Study of the influence of technological modes of multilayer induction surfacing on the structure formation of antifriction coatings made of AK12 alloy]. Sovremennye metody i tekhnologii sozdaniya i obrabotki materialov. Kn. 2. Tekhnologii i oborudovanie mekhanicheskoy i fiziko-tekhnicheskoy obrabotki, 2020, pp. 234–242 (in Russ.).
  16. Belotserkovsky M.A., Komarov A.I., Sosnovskiy I.A., Orda D.V., Kurilyonok A.A., Iskandarova D.O. Vliyanie flyusov na strukturu pokrytiya iz splava AK12 s podsloem svintsa, poluchennogo na vnutrenney poverkhnosti stalnoy zagotovki [Influence of fusing agents on structure of the coating made of AK12 (AlSi12) alloy with a lead sublayer obtained on the steel blank inner surface]. Aktualnye voprosy mashinovedeniya, 2020, iss. 9, pp. 336–341 (in Russ.).