Smart Search 



Title of the article STRUCTURAL MECHANISM OF PERFORMANCE LOSS OF COPPER COOLERS OF GLASS PRODUCTION WITH THERMAL DIFFUSION PROTECTIVE LAYER
Authors

KONSTANTINOV Valery M., D. Sc. in Eng., Prof., Head of the Department “Materials Science in Mechanical Engineering”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

PLETENEV Ilya V., Ph. D. Student of the Department “Materials Science in Mechanical Engineering”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

DASHKEVICH Vladimir G., Ph. D. in Eng., Assoc. Prof., Associate Professor of the Department “Materials Science in Mechanical Engineering”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SUDNIKOV Mitrofan A., Ph. D. Student of the Department “Materials Science in Mechanical Engineering”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MECHANICAL ENGINEERING MATERIALS AND TECHNOLOGIES
Year 2023
Issue 3(64)
Pages 51–59
Type of article RAR
Index UDK 666.1.002.5
DOI https://doi.org/10.46864/1995-0470-2023-3-64-51-59
Abstract A general assessment of options for increasing the resistance of elements of heat-removing devices made of copper is carried out. The peculiarity of high-temperature corrosion destruction of thermal diffusion aluminum- containing protective layer on M1 grade copper as the most common cause of loss of efficiency is studied. The proposed mechanism for the destruction of the thermal diffusion protective layer on the lamellar element of a cooler of glass production is shown, which is caused by two competing processes — layer “resorption” and structural changes during phase interaction. The mechanical destruction features of the protective layer are studied during pure bending and the formation of penetrating cracks deep into the product. The elastoplastic properties of the main structural components of the diffusion layer are studied by the nanoindentation method, and the values of their plasticity index are established.
Keywords thermal diffusion layers, brittleness, intermetallic compounds, copper aluminides, heat resistance of copper
  You can access full text version of the article.
Bibliography
  1. Zufman V.Yu., et al. Vysokotemperaturnoe okislenie medi v ramkakh podkhoda okislitelnogo konstruirovaniya [High-temperature oxidation of copper using oxidative constructing approach]. Physics and chemistry of materials treatment, 2017, no. 3, pp. 86–91 (in Russ.).
  2. Belousov V.V., Klimashin A.A. Vysokotemperaturnoe okislenie medi [High-temperature oxidation of copper]. Russian chemical reviews, 2013, vol. 82, no. 3, pp. 273–288. DOI: https://doi.org/10.1070/RC2013v082n03ABEH004343 (in Russ.).
  3. Kofstad P. High-temperature corrosion. London, Elsevier Applied Science, 1988. Ch. 11, pp. 382–385.
  4. Gao Y., et al. Influence of high-temperature aluminizing treatment on the corrosion resistance of 90/10 copper-nickel alloy. Anti-corrosion methods and materials, 2021, vol. 68, no. 5, pp. 365–372. DOI: https://doi.org/10.1108/ACMM-04-2021-2467.
  5. Nikolaev A.K. Zharoprochnye (nizkolegirovannye) splavy na osnove medi [Heat-resistant (low-alloyed) alloys based on copper]. Med. Latun. Bronza, 2006, pp. 21–52 (in Russ.).
  6. Kolomytsev P.T. Zharostoykie diffuzionnye pokrytiya [Heat-resistant diffusion coatings]. Moscow, Metallurgiya Publ., 1979. 272 p. (in Russ.).
  7. Ukraintsev A.E. Razrabotka sostavov i sozdanie na medi diffuzionnykh sloev elektrodugovoy metallizatsiey s posleduyushchey termoobrabotkoy. Avtoref. diss. kand. tekhn. nauk [Development of compositions and creation of diffusion layers on copper by electric arc metallization with subsequent heat treatment. Extended Abstract of Ph. D. Thesis]. Moscow, 2010. 22 p. (in Russ.).
  8. Dubinin G.N., Sokolov V.S. Zharostoykost i korrozionnaya stoykost medi i bronzy posle alitokhromirovaniya [Heat resistance and corrosion resistance of copper and bronze after alitochrome plating]. Zashchitnye pokrytiya na metallakh, 1979, iss. 13, pp. 79–82 (in Russ.).
  9. Vavilovskaya N.G., Timonina L.G. Okalinostoykost i soprotivlenie istiraniyu medi, diffuzionno-nasyshchennoy alyuminiem, nikelem, tsirkoniem [Scale resistance and abrasion resistance of copper diffusion-saturated with aluminum, nickel, zirconium]. Zashchitnye pokrytiya na metallakh, 1971, iss. 5, pp. 177–179 (in Russ.).
  10. Lyakhovich L.S. Khimiko-termicheskaya obrabotka metallov i splavov [Chemical-thermal treatment of metals and alloys]. Moscow, Metallurgiya Publ., 1981. 424 p. (in Russ.).
  11. Sitkevich M.V., Belskiy E.I. Sovmeshchennye protsessy khimikotermicheskoy obrabotki s ispolzovaniem obmazok [Combined processes of chemical-thermal treatment using coatings]. Minsk, Vysshaya shkola Publ., 1987. 156 p. (in Russ.).
  12. Akimov V.A., Radyuk A.G., Titlyanov A.E. Sozdanie diffuzionnykh sloev na medi v zashchitnoy srede [Generation of diffused layers on copper in the shielding atmosphere]. Tsvetnye metally, 2010, no. 7, pp. 67–69 (in Russ.).
  13. Radyuk A.G., Titlyanov A.E., Ukraintsev A.E. Formirovanie diffuzionnykh sloev na poverkhnosti medi i ee splavov [Forming of diffusion layers on the surface of copper and its alloys]. Tsvetnye metally, 2007, no. 5, pp. 95–97 (in Russ.).
  14. Konstantinov V.M., Dashkevich V.G., Pletenev I.V. Issledovanie osobennostey struktury i svoystv termodiffuzionnykh zharostoykikh pokrytiy na medi [Study of structural features and properties of hermodiffusion heat resistant coatings on copper]. Foundry production and metallurgy, 2021, no. 1, pp. 124–129. DOI: https://doi.org/10.21122/1683-6065-2021-1-124-129 (in Russ.).
  15. Dashkevich V.G., Pletenev I.V., Sudnikov M.A. Analiz i prognozirovanie uprugoplasticheskikh svoystv termodiffuzionnykh sloev na mednoy podlozhke [Analysis and prediction of elastic-plastic properties of thermodiffusion layers on a copper substrate]. Metallurgiya, 2022, iss. 43, pp. 219–229 (in Russ.).
  16. Dub S.N., Novikov N.V. Ispytanie tverdykh tel na nanotverdost [Testing solids for nanohardness]. Sverkhtverdye materialy, 2004, no. 6, pp. 16–33 (in Russ.).
  17. Oliver W.C., Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. Journal of materials research, 2004, vol. 19, iss. 1, pp. 3–20. DOI: https://doi.org/10.1557/jmr.2004.19.1.3.