Smart Search 


4_2023_sen_5

Title of the article IMPROVING THE ACOUSTIC BEHAVIOR OF THE HOUSING OF AUTOMATIC TRANSMISSION OF N2 CATEGORY VEHICLE BASED ON THE METHOD OF MODAL REPRESENTATION OF A DYNAMIC SYSTEM
Authors

TRUSEVICH Ilya A., Ph. D. in Eng., Junior Researcher, Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russian Federation; Associate Professor of the Department of Tracked Vehicles and Applied Mechanics, Kurgan State University, Kurgan, Russian Federation; First Category Design Engineer, JSC “Special Design Bureau of Mechanical Engineering”, Kurgan, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

TARATORKIN Alexander I., D. Sc. in Eng., Senior Researcher, Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

TARATORKIN Igor A., D. Sc. in Eng., Prof., Chief Researcher, Head of the Department of Mechanics of Transport Vehicles, Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russian Federation; Professor of the Department of Tracked Vehicles and Applied Mechanics, Kurgan State University, Kurgan, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICAL ENGINEERING COMPONENTS
Year 2023
Issue 4(65)
Pages 38–46
Type of article RAR
Index UDK 629.3
DOI https://doi.org/10.46864/1995-0470-2023-4-65-38-46
Abstract There is a global tendency nowadays in the development of transport vehicles to ensure high safety, energy efficiency and comfort, characterized primarily by ergonomic and vibroacoustic indicators. This forces engineers and scientists to constantly strive to reduce a noise level emitted by both the vehicle as a whole and individual units and systems. The paper is a continuation of a series of articles devoted to the development of a verified mathematical model of a promising automatic transmission (AT) for a N2 category vehicle, reliably characterizing its vibroacoustic behavior. The article represents the results of a computational and experimental study of the AT vibroacoustic behavior, including the stages of testing, processing and analysis of their results, verification of the computational model created in the Simcenter 3D software product, identification of the main sources of acoustic radiation and the development of proposals for its reduction. The vibroacoustic characteristics of the object of study are obtained, namely frequencies and corresponding acoustic pressure values, their localization on the AT housing is performed. The developed and verified AT model makes it possible to predict the level of vibration and acoustic radiation with satisfactory accuracy. Based on comparative evaluation modeling of various design modification options, the best ones are determined, which allow to obtain the minimum acoustic pressure level at the measurement points and neutralize the most significant forms of vibrations. The introduction of the developed scientifically-based technical solutions into the design made it possible to reduce the integral level of acoustic pressure in the entire range from 2 to 10 dBA.
Keywords NVH, vibroacoustics, transmission, simulation, verification, experimental research, digital copy, nonlinearity, prediction
  You can access full text version of the article.
Bibliography
  1. Xu Z. Experimental research on idle combustion noise of a diesel engine. Journal of physics: conference series, 2022, vol. 2359. DOI: https://doi.org/10.1088/1742-6596/2359/1/012003.
  2. Xu Z., Luo X., Qiu Y., Hao Z. Modeling and NVH analysis of a full engine dynamic model with valve train system. Applied sciences, 2020, vol. 10, iss. 15. DOI: https://doi.org/10.3390/app10155145.
  3. Tan Y., Zhang B., Yuan Z. Sound quality evaluation metrics on diesel engines. SAE Technical Paper, no. 2023-01-1128, 2023. DOI: https://doi.org/10.4271/2023-01-1128.
  4. Tan Y. Sound quality enhancement with exhaust manifold and hot-end structure optimization on H8 engine systems. SAE Technical Paper, no. 2022-01-0621, 2022. DOI: https://doi.org/10.4271/2022-01-0621.
  5. Hou H. Coupled fluid-structure analysis for exhaust system NVH. SAE Technical Paper, no. 2014-01-0020, 2014. DOI: https://doi.org/10.4271/2014-01-0020.
  6. John Britto V.A., Sidram Hatti K., Sankaranarayana S., Sadasivam S., Loganathan E. Air intake system NVH performance development for commercial vehicle. SAE Technical Paper, no. 2014-01-0019, 2014. DOI: https://doi.org/10.4271/2014-01-0019.
  7. Gao Y.-L., Xu J.-J., Cai X.-R., Sun Y.-H. Impact of engine cooling fan on vehicle interior NVH. Chinese internal combustion engine engineering, 2015, no. 1, pp. 53–56. DOI: https://doi.org/10.13949/j.cnki.nrjgc.2015.01.009 (in Chinese).
  8. Abe T., Felice M.J. Driving the next generation of powertrain NVH refinement through virtual design. Proceedings of ISMA 2010 — International conference on noise and vibration engineering, including USD 2010. Leuven, 2010, pp. 4275–4291.
  9. Pasch G., Jacobs G., Berroth J. NVH system simulation of a tractor with hydrostatic-mechanical power split transmission. Landtechnik, 2020, vol. 75, no. 4, pp. 301–315. DOI: https://doi.org/10.15150/lt.2020.3254.
  10. Zhang J., Bao Y. Launching rattle noise test analysis and improvement for a SUV with 6AT automatic transmission. Proceedings of China SAE Congress 2022: Selected papers, 2023, pp. 288–298.
    DOI: https://doi.org/10.1007/978-981-99-1365-7_21.
  11. Tůma J. Vehicle gearbox noise and vibration: Measurement, signal analysis, signal processing and noise reduction measures. John Wiley & Sons, Ltd, 2014. 243 p. DOI: https://doi.org/10.1002/9781118797563.
  12. Zhang J., Geluk T. From measured road profile to tire blocked forces for road noise prediction. SAE Technical Paper, no. 2023-01-1084, 2023. DOI: https://doi.org/10.4271/2023-01-1084.
  13. Ortega Almirón J., Bianciardi F., Corbeels P., Pieroni N., Kindt P., Desmet W. Vehicle road noise prediction using component-based transfer path analysis from tire test-rig measurements on a rolling tire. Journal of sound and vibration, 2022, vol. 523. DOI: https://doi.org/10.1016/j.jsv.2021.116694.
  14. Heckl M. Tyre noise generation. Wear, 1986, vol. 113, iss. 1, pp. 157–170. DOI: https://doi.org/10.1016/0043-1648(86)90065-7.
  15. Lukić J. An approach to an NVH investigation of vehicle hydraulic pumps. Journal of low frequency noise vibration and active control, 2011, vol. 30, iss. 2, pp. 137–147. DOI: https://doi.org/10.1260/0263-0923.30.2.137.
  16. Oh J., Sankaran S., Truitt J. A computational and experimental investigation on the effect of bleed slits for a shim stack type hydraulic damper. SAE Technical Paper, no. 2023-01-1059, 2023. DOI: https://doi.org/10.4271/2023-01-1059.
  17. Zhang L., Wu P., Wu D.-Z., Hong W.-R. Study on pressure fluctuation control of a regenerative pump for fuel system. Chinese journal of engineering design, 2017, vol. 24, iss. 4, pp. 395–402. DOI: https://doi.org/10.3785/j.issn.1006-754X.2017.04.005 (in Chinese).
  18. Beidl C.V., Rust A., Rasser M. Key steps and methods in the design and development of low noise engines. SAE Technical Paper, no. 1999-01-1745, 1999. DOI: https://doi.org/10.4271/1999-01-1745.
  19. Wischmann S., Drichel P., Jacobs G., Berges J., Berroth J. Combining sensitivity and uncertainty analysis to efficiently quantify parametric uncertainties in NVH system simulation models. Forschung im Ingenieurwesen, 2023, vol. 87, iss. 1, pp. 453–467. DOI: https://doi.org/10.1007/s10010-023-00644-z.
  20. Wei Z., Zheng L., Huang L., Gao W., Li Y., Zhao X., Liu R. Prediction and analysis of diesel engine combustion noise using transfer function method. International journal of automotive technology, 2021, vol. 22, iss. 3, pp. 665–676. DOI: https://doi.org/10.1007/s12239-021-0062-y.
  21. Crocker M.J., et al. Handbook of noise and vibration control. Hoboken, John Wiley & Sons, Inc., 2007. 1600 p. DOI: https://doi.org/10.1002/9780470209707.
  22. Automotive engineering. Powertrain, chassis system and vehicle body. Oxford, Butterworth-Heinemann, 2009. 834 p.
  23. Plunt J. Finding and fixing vehicle NVH problems with transfer path analysis. Sound and vibration, 2005, vol. 39, iss. 11, pp. 12–17.
  24. Tandogan O., Yapici T., Doganli M., Sevginer C. Refinement of vehicle interior noise by reduction of driveline vibrations. The journal of the Acoustical Society of America, 2010, vol. 127, iss. 3_Supplement. DOI: https://doi.org/10.1121/1.3384011.
  25. Ganesha B., Umesh K.N., Setty G.R., Naik S. Dynamic vibration analysis of gear box casing using ANSYS software. International journal of innovative research in science, engineering and technology, 2017, vol. 6, iss. 7, pp. 13354–13362. DOI: https://doi.org/10.15680/IJIRSET.2017.0607128.
  26. Yu F., Li Y., Sun D., Shen W., Xia W. Analysis for the dynamic characteristic of the automobile transmission gearbox. Research journal of applied sciences, engineering and technology, 2013, vol. 5, iss. 4, pp. 1449–1453. DOI: https://doi.org/10.19026/rjaset.5.4886.
  27. Trusevich I.A., et al. Verifikatsiya modalnoy modeli transmissii s tselyu prognozirovaniya NVH parametrov [Verification of a modal transmission model in order to predict NVH parameters]. Bulletin of the South Ural State University. Series “Mechanical engineering industry”, 2021, vol. 21, no. 3, pp. 61–68 (in Russ.).
  28. Trusevich I.A., et al. Algoritm optimizatsii vibratsionnykh nagruzok, formiruemykh zubchatymi zatsepleniyami perspektivnoy korobki peredach gruzovogo avtomobilya [Algorithm of optimization of vibration loads formed by gears of a prospective transmission of a truck]. Bulletin of the South Ural State University. Series “Mechanical engineering industry”, 2021, vol. 21, no. 4, pp. 5–14 (in Russ.).
  29. Taratorkin A.I. Nauchnye metody snizheniya dinamicheskoy i vibroakusticheskoy nagruzhennosti silovykh peredach kolesnykh i gusenichnykh mashin putem variatsii modalnykh svoystv. Diss. d-ra tekhn. nauk [Scientific methods of reducing dynamic and vibroacoustic loading of power gears of wheeled and tracked vehicles by varying modal properties. D. Sc. Thesis]. Moscow, 2022. 377 p. (in Russ.).