Smart Search 


4_2024_sen_5

Title of the article CALCULATION AND EXPERIMENTAL STUDY OF THE DYNAMICS OF THE TRACK MOVER BYPASS OF A CROSS-COUNTRY TRANSPORT VEHICLE
Authors

TARATORKIN Alexey I., Postgraduate Student, Bauman Moscow State Technical University, Moscow, Russian Federation; Third Category Design Engineer, Special Design Bureau of Mechanical Engineering, Kurgan, Russian Federation; This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ABDULOV Sergey V., Ph. D. in Eng., Executive Director – Chief Designer, Special Design Bureau of Mechanical Engineering, Kurgan, Russian Federation; Associate Professor of the Department of Tracked Vehicles and Applied Mechanics, Kurgan State University, Kurgan, Russian Federation; This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

DERZHANSKII Viktor B., Ph. D. in Eng., Prof., Head of the Department of Tracked Vehicles and Applied Mechanics, Kurgan State University, Kurgan, Russian Federation; Leading Researcher, Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russian Federation; This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

VOLKOV Alexandr A., Ph. D. in Eng., Associate Professor of the Department of Tracked Vehicles and Applied Mechanics, Kurgan State University, Kurgan, Russian Federation; Software Engineer, Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russian Federation; This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SARACH Evgeniy B., D. Sc. in Eng., Professor of the Department of SM-9, Bauman Moscow State Technical University, Moscow, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

KOMISSAROV Alexandr I., Ph. D. in Eng., Associate Professor of the Department of SM-9, Bauman Moscow State Technical University, Moscow, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section GENERAL ISSUES OF MECHANICS
Year 2024
Issue 4(69)
Pages 50–60
Type of article RAR
Index UDK 629.3.033
DOI https://doi.org/10.46864/1995-0470-2024-4-69-50-60
Abstract The article presents an analysis of the methods for studying the dynamics of the branches of the track bypass, substantiates and proposes a research methodology and a simulation spatial model of the track mover of a cross-country transport vehicle, which differs from the common string inertialess and rod inertial models of the branches of the track mover by the ability to take into account a complex set of kinematic and force factors excited during the movement of the tracked vehicle in steady and transient motion modes. The model is developed in the “Universal Mechanism” software package, combines the main dependencies of the machine’s suspension system operation in various driving conditions and the dependencies of the interaction of the track links with each other, taking into account the radial, longitudinal and torsional rigidities during their interaction. The model allows for further development for the purpose of in-depth study and consideration of various factors acting in the design elements of the track mover, such as the features of the interaction of the support rollers with the links in the support branch of the track, the formation features of the moment of resistance to rotation and the turning moment depending on the type of the turning mechanism — stepped, differential hydrostatic. The efficiency of the model is assessed using the example of studying the phenomenon of “capture” of the track by the drive wheel when running over a typical unevenness of a sinusoidal profile. The substantiation of the technical solution option for the problem is given, installation of a free branch damper, and the results of determining the numerical parameters of its dynamic loading in relation to the object of study, a cross-country tracked transport vehicle. Thus, based on the results of the studies, the features of dynamic processes in the track mover were established, the main patterns of the formation process of transverse oscillations, their dependence on the design parameters of the bypass and various operational factors were revealed.
Keywords track mover, dynamics, interaction, excitation, wave process, modeling
  You can access full text version of the article.
Bibliography
  1. Platonov V.F. Dinamika i nadezhnost gusenichnogo dvizheniya [Dynamics and reliability of tracked movement]. Moscow, Mashinostroenie Publ., 1973. 232 p. (in Russ.).
  2. Teoriya i konstruktsiya tanka. T. 6. Voprosy proektirovaniya khodovoy chasti voennykh gusenichnykh mashin [Theory and design of the tank. Vol. 6. Design issues of the chassis of military tracked vehicles]. Moscow, Mashinostroenie Publ., 1985. 244 p. (in Russ.).
  3. Avramov V.P., Kaleychev N.B. Dinamika gusenichnoy transportnoy mashiny pri ustanovivshemsya dvizhenii po nerovnostyam [Dynamics of a tracked transport vehicle during steady movement over uneven surfaces]. Kharkov, Vysshaya shkola Publ., Kharkovskiy gosudarstvennyy universitet Publ., 1989. 111 p. (in Russ.).
  4. Koshlyakov N.S., Gliner E.B., Smirnov M.M. Uravneniya v chastnykh proizvodnykh matematicheskoy fiziki [Partial differential equations of mathematical physics]. Moscow, Vysshaya shkola Publ., 1970. 710 p. (in Russ.).
  5. Timoshenko S.P., Young D.H., Weaver W. Jr. Vibration problems in engineering. John Wiley, 1974.
  6. Svetlitskiy V.A. Zadachi i primery po teorii kolebaniy. Ch. II [Problems and examples in the theory of oscillations. Part II]. Moscow, Moskovskiy gosudarstvennyy tekhnicheskiy universitet im. N.E. Baumana Publ., 1998. 264 p. (in Russ.).
  7. Svetlitskiy V.A. Stroitelnaya mekhanika mashin. Mekhanika sterzhney. T. 1. Statika [Structural mechanics of machines. Mechanics of rods. Vol. 1. Statics]. Moscow, Fizmatlit Publ., 2009. 408 p. (in Russ.).
  8. Zhdanovich Ch.I., Plishch V.N. Eksperimentalnye issledovaniya kolebaniy verkhney vetvi rezinoarmirovannoy gusenitsy selskokhozyaystvennogo traktora [Experimental studies of vibrations of the upper branch of the rubber-reinforced track of an agricultural tractor]. Agropanorama, 2023, no. 4(158), pp. 4–9. DOI: https://doi.org/10.56619/2078-7138-2023-158-4-4-9 (in Russ.).
  9. Zhdanovich Ch.I., Plishch V.N. Vybor kolichestva i raspolozheniya podderzhivayushchikh katkov gusenichnogo traktora na osnovanii analiza kolebaniy verkhney vetvi rezinoarmirovannoy gusenitsy [Selecting number and location of support rollers of crawler tractor based on analysis of vibrations of upper branch of rubber track]. Proceedings of the National Academy of Sciences of Belarus. Physical-technical series, 2023, vol. 68, no. 2, pp. 121–136. DOI: https://doi.org/10.29235/1561-8358-2023-68-2-121-136 (in Russ.).
  10. Strutynskyi S., Kravchuk V., Semenchuk R. Mathematical modelling of a specialized vehicle caterpillar mover dynamic processes under condition of the distributing the parameters of the caterpillar. International journal of engineering & technology, 2018, vol. 7, no. 4.3, pp. 40–46. DOI: https://doi.org/10.14419/ijet.v7i4.3.19549.
  11. Strutynsky S.V. Impulse dynamic processes and wave phenomena in the caterpillar mover of the terrestrial robotic complex. Vibrations in engineering and technology, 2018, no. 4(91), pp. 5–13.
  12. Scholar C, Perkins NC. Efficient vibration modelling of elastic vehicle track systems. Journal of sound and vibration, 1999, vol. 228, iss. 5, pp. 1057–1078. DOI: https://doi.org/10.1006/jsvi.1999.2458.
  13. Chołodowski J., Dudziński P.A., Ketting M. On the energy losses due to tracks vibrations in rubber track crawler vehicles. Archives of civil and mechanical engineering, 2021, vol. 21. DOI: https://doi.org/10.1007/s43452-021-00212-8.
  14. Chołodowski J., Dudziński P. A method for experimental identification of bending resistance of reinforced rubber belts. Proc. 15th conference on computational technologies in engineering “Computational technologies in engineering (TKI’2018)”. Jora Wielka, 2019. DOI: https://doi.org/10.1063/1.5092042.
  15. Rui X., Gu J., Zhang J., Zhou Q., Yang H. Visualized simulation and design method of mechanical system dynamics based on transfer matrix method for multibody systems. Advances in mechanical engineering, 2017, vol. 9, iss. 8. DOI: https://doi.org/10.1177/1687814017714729.
  16. Gu J., Rui X., Zhang J., Chen G., Zhou Q. Riccati transfer matrix method for linear tree multibody systems. Journal of applied mechanics, 2017, vol. 84, iss. 1. DOI: https://doi.org/10.1115/1.4034866.
  17. Rui X., Bestle D., Zhang J., Zhou Q. A new form of the transfer matrix method for multibody systems. Multibody system dynamics, 2016, vol. 38, iss. 2, pp 137–156. DOI: https://doi.org/10.1007/s11044-016-9528-5.
  18. Stephen N.G. On the Riccati transfer matrix method for repetitive structures. Mechanics research communications, 2010, vol. 37, iss. 7, pp. 663–665. DOI: https://doi.org/10.1016/j.mechrescom.2010.07.017.
  19. Pogorelov D., Rodikov A., Kovalev. R. Parallel computations and co-simulation in Universal Mechanism software. Part 1: Algorithms and implementation. Transport problems, 2019, vol. 14, iss. 3, pp. 163–175. DOI: https://doi.org/10.20858/tp.2019.14.3.15.
  20. Sakalo V.I., Sakalo A.V. Krivye kontaktnoy ustalosti relsovoy stali [Rail steel contact fatigue curves]. Russian railway science journal, 2024, vol. 83, no. 2, pp. 124–135. DOI: https://doi.org/10.21780/2223-9731-2024-83-2-124-135 (in Russ.).
  21. Bolotin V.V. Dinamicheskaya ustoychivost uprugikh sistem [Dynamic stability of elastic systems]. Moscow, Gosudarstvennoe izdatelstvo tekhniko-teoreticheskoy literatury Publ., 1956. 600 p. (in Russ.).
  22. Taratorkin A.I., Abdulov S.V., Derzhansky V.B., Sarach E.B., Taratorkin A.I., Taratorkin I.A. Vozbuzhdenie volnovykh protsessov v dvizhitele bystrokhodnoy gusenichnoy mashiny [Excitation of wave processes in propulsion of a high-speed tracked vehicle]. Aktualnye voprosy mashinovedeniya, 2023, iss. 12, pp. 36–41 (in Russ.).
  23. Taratorkin I.A., Derzhanskii V.B., Abdulov S.V., Volkov A.A., Taratorkin A.I. Dinamika protsessov vzaimodeystviya elementov gusenichnogo dvizhitelya pri naezde pervogo opornogo katka na nerovnost [Caterpillar drive elements interaction when the first roller wheel hits an unevenness process dynamic]. Bulletin of the South Ural State University. Series “Mechanical engineering industry”, 2023, vol. 23, no. 3, pp. 27–38. DOI: https://doi.org/10.14529/engin230303 (in Russ.).
  24. Fahrmechanik der Kettenfahrzeuge. Available at: https://athene-forschung.unibw.de/doc/111331/111331.pdf (accessed July 12, 2024).