Smart Search 


1_2023_sen_9

Title of the article ENVIRONMENTALLY SAFE LIQUID LUBRICANT FOR THE SAW CHAINS BASED ON THE COMBINED DISPERSION MEDIUM
Authors

ZAPOLSKY Andrey V., Specialist in the Introduction of New Technologies, LLC “Eurasia Lubricants”, Zaslavl, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ZHORNIK Viktor I., D. Sc. in Eng., Prof., Head of the Department of Technologies of Mechanical Engineering and Metallurgy — Head of the Laboratory of Nanostructured and Superhard Materials of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICAL ENGINEERING MATERIALS AND TECHNOLOGIES
Year 2023
Issue 1(62)
Pages 63–71
Type of article RAR
Index UDK 669.018.95
DOI https://doi.org/10.46864/1995-0470-2023-1-62-63-71
Abstract The realization of the synergistic effect is shown on the example of creating of the composite liquid lubricant with improved properties using the combined dispersion medium obtained by mixing of the vegetable and mineral oils. The lubricant for the saw chains and the method of its production are developed. The highly purified mineral oil of group III of the NS-4 brand is added to the rapeseed oil in the amount of 20.0…25.0 wt.%, and the complex of the calcium sulfonate with calcium carbonate in the amount of 1.5…2.0 wt.% is used as a multifunctional additive in the manufacture of this lubricant. The developed lubricant has the following characteristics: kinematic viscosity at 40 °C — 61…63 mm2/s; solidification temperature is –29 °C; flash point — 242…246 °C; welding load — 2,764 N; wear index — 0.39…0.41 mm; mass fraction of free organic acids — 1.3...4.7 mg KOH/g; degree of biodegradability — 88–89 %; warranty period of storage in an open container — 12 months.
Keywords liquid lubricant, saw chain, vegetable and mineral oils, combined dispersion medium, physicochemical properties, sedimentation stability, biodegradability
  You can access full text version of the article.
Bibliography
  1. Streltsov V.V., Strebkov S.V. Tendentsii ispolzovaniya biologicheskikh smazochnykh materialov [Trends in the use of biological lubricants]. Vestnik FGOU VPO MGAU, 2009, no. 2(33), pp. 66–69 (in Russ.).
  2. Evdokimov A.Yu., Fuks I.G., Lyubinin I.A. Smazochnye materialy v tekhnosfere i biosfere: ekologicheskiy aspekt [Lubricants in the technosphere and biosphere: ecological aspect]. Kiev, Atika-N Publ., 2012. 292 p. (in Russ.).
  3. Derevyago I.P. Kontseptsiya «zelenoy ekonomiki» i vozmozhnosti ee realizatsii v usloviyakh Respubliki Belarus [“Green economy” concept and possibilities of its implementation in the context of the Republic of Belarus]. Belarusian economic journal, 2017, no. 1(78), pp. 24–37 (in Russ.).
  4. Zapolsky A.V. Biorazlagaemye smazochnye materialy – vazhneyshiy produkt smazochnoy industrii budushchego [Biodegradable lubricants are the most important product of the future lubricant industry]. Novaya ekonomika, 2018, no. 1, pp. 226–229 (in Russ.).
  5. Gnanasekaran D., Chavidi V.P. Vegetable oil based bio-lubricants and transformer fluids. Applications in power plants. Singapore, Springer, 2018. 155 р.
  6. Fuks I.G., Evzhdokomiv A.Yu., Dzhamalov A.A., Luksa A. Rastitelnye masla i zhivotnye zhiry – syre dlya prigotovleniya tovarnykh smazochnykh materialov [Vegetable oils and animal fats – raw materials for the preparation of commercial lubricants]. Khimiya i tekhnologiya topliv i masel, 1992, no. 4, pp. 34–39 (in Russ.).
  7. Rudnick L.R. Lubricant additives: chemistry and applications. Boca Raton, Taylor & Francis Group, 2009. 790 p.
  8. Fessenbecker A., Roehrs I., Pegnoglou R. Additives for environmentally acceptable lubricants. NLGI Spokesman, 1996, nо. 6(60), pр. 9–25.
  9. Zhornik V.I., Zapolsky A.V., Ivakhnik A.V. Parnitsky A.M. Development of the component composition of the biodegradable liquid lubricant for saw chains. Mechanics of machines, mechanisms and materials, 2021, no. 3(56), pp. 70–82.
  10. OʼBrien R.D. Fats and oils. Formulating and processing for applications. Boca Raton, CRC Press LLC, 2003. 616 p.
  11. Oblashchikova I.R. Issledovanie rapsovogo masla v kachestve osnovy alternativnykh smazochnykh materialov. Diss. kand. tekhn. nauk [Study of rapeseed oil as the basis of alternative lubricants. Ph. D. Thesis]. Moscow, 2004. 109 p. (in Russ.).
  12. Devyanin S.N., Markov V.A., Semenov V.G. Rastitelnye masla i topliva na ikh osnove dlya dizelnykh dvigateley [Vegetable oils and fuels based on them for diesel engines]. Moscow, FGOU VPO MGAU Publ., 2007. 339 p. (in Russ.).
  13. Mang T., Dresel W. Lubricants and Lubrication. Wiley-VCH Verlag GmbH & Co. KGaA, 2007. 850 p.
  14. Lingg G. Unconventional base oils for liquid and semi-solid lubricants. Proc. 14th International Colloquium Tribology. Esslingen, 2004, vol. 1, pр. 1–4.
  15. State Standard 32552-2015. Standartnyy metod ispytaniy dlya opredeleniya aerobno-vodnogo biokhimicheskogo razlozheniya smazok ili ikh komponentov v zakrytom respirometre [Standard test method for determining the aerobic-aqueous biochemical decomposition of lubricants or their components in a closed respirometer]. Minsk, Evraziyskiy sovet po standartizatsii, metrologii i sertifikatsii Publ., 2017. 16 p. (in Russ.).
  16. Leontev V.N., et al. Ispytanie obraztsov smazochnykh materialov na biorazlagaemost [Testing of lubricant samples for biodegradability]. Materialy 85 nauchno-tekhnicheskoy konferentsii professorsko-prepodavatelskogo sostava, nauchnykh sotrudnikov i aspirantov (s mezhdunarodnym uchastiem) “Tekhnologiya organicheskikh veshchestv” [Proc. 85th scientific and technical conference of faculty, researchers and postgraduates (with international participation) “Technology of organic substances”]. Minsk, 2021, pp. 349–351 (in Russ.).
  17. Menumerov Je.R. Vliyanie antioksidantnykh prisadok na vyazkostno-temperaturnye svoystva SOTS rastitelnoy prirody [Influence of antioxidant additives on viscosity-temperature properties of the vegetative nature lubricant-cooling agent]. Available at: http://repository.kpi.kharkov.ua/bitstream/Kh-PI-Press/18242/1/RITS_2011_80_Menumerov_Vliyanie.pdf (accessed 09 January 2023) (in Russ.).
  18. Zhornik V.I., Ivakhnik A.V., Zapolsky A.V. Ekologicheski bezopasnye smazochnye materialy na osnove smesi rastitelnogo i mineralnogo masel [Environmentally friendly lubricants based on the mixture of the vegetable and mineral oils]. Vestnik of Vitebsk State Technological University, 2022, no. 1(42), pp. 99–114 (in Russ.).
  19. Rastvory VMS [Solutions of high-molecular weight compounds]. Available at: https://en.ppt-online.org/164524 (accessed 03 January 2023) (in Russ.).
  20. Gromakov N.S. Dispersnye sistemy i ikh svoystva [Dispersed systems and their properties]. Kazan, Kazanskogo gosudarstvennogo arkhitekturno-stroitelnogo universiteta Publ., 2015. 91 p. (in Russ.).
  21. Okada T. Biodegradable lubricant composition. Patent JP, no. JP2009292943A, 2007.