METHOD OF ASSESSMENT OF THE RESIDUAL LIFE OF PIPES OF THE LINEAR PART OF THE PIPELINE WITH THE TYPICAL DEFECTS ACCORDING TO THE CRACK RESISTANCE CRITERIA UNDER CYCLIC LOADING

VESELUKHA Vadim M., Lecturer, Lida College of the State University of Grodno named after Yanka Kupala, Lida, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

BOGDANOVICH Alexander V., D. Sc. in Eng., Assoc. Prof., Professor of the Department of Theoretical and Applied Mechanics, Belarusian State University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

A method of estimating of the residual life of pipes for linear part of the pipeline with the typical defects under cyclic loading based on the deformation approach based on measuring the density of the specimen and plotting the cyclic elastic-plastic fracture diagram for the specimen with a crack is described in the paper. The correction for plasticity material, taking into account the actual cross-sectional dimensions of the specimen in the plane of crack growth, is applied for the determination of stress intensity factors. The algorithm of calculation and experimental prediction of the residual life of pipes for linear part of the pipeline with a typical dangerous defects (longitudinal crack, a crack in the dent, corrosion pitting with crack) on the criterion of crack growth resistance under cyclic loading after long time operation with account of influence of corrosion-erosion processes and deformation aging of pipe material is proposed.

crack resistance, survivability, oil pipeline, long-term operation, stress intensity factor, density, residual life

• Veselukha V.M., Bogdanovich A.V. Metodika ocenki predelnogo sostojanija trub linejnj chasti nefteprovoda s tipichnymi defektami po kriterijam treshhinostojkosti [A method for estimating the limiting state of pipes of a linear part of an oil pipeline with typical defects by crack resistance criteria]. Aktualnye voprosy mashinovedenija: cb. nauch. tr. [Topical Issues of Mechanical Engineering: collection of scientific papers], Minsk, 2016, no. 5, pp. 214–217.
• Standard test method for plane-strain fracture toughness of materials. Annual Book of ASTM Standards, E.339-74, 1976, pp. 471–490.
• Drozdovskiy B.A., Morozov E.M. Metody ocenki vjazkosti razrushenija [Methods for assessing fracture toughness]. Zavodskaja laboratorija [Factory laboratory], 1976, no. 8, pp. 916–1004.
• Sosnovskiy L.A., Khamaza L.A., Babich N.K. Jeksperimentalnoe issledovanie ciklicheskoj treshhinostojkosti stali 20 [Experimental Investigation of the Cyclic Crack Resistance of Steel 20]. Zavodskaja laboratorija [Factory laboratory], 1990, no. 6, pp. 34–38.
• Sosnovskiy L.A., Bogdanovich A.V. Analiz diagrammy ciklicheskogo uprugoplasticheskogo razrushenija obrazca s treshhinoj. Soobshhenie 1 [Analysis of the diagram of cyclic elastoplastic fracture of a sample with a crack. Statement 1]. Problemy prochnosti [Problems of Strength], 1995, no. 5–6, pp. 39–51.
• Sosnovskiy L.A., Bogdanovich A.V. Analiz diagrammy ciklicheskogo uprugoplasticheskogo razrushenija obrazca s treshhinoj. Soobshhenie 2 [Analysis of the diagram of cyclic elastoplastic fracture of a sample with a crack. Statement 2]. Problemy prochnosti [Problems of Strength], 1995, no. 5–6, pp. 52–61.
• Sosnovskiy L.A. Statisticheskaja mehanika ustalostnogo razrushenija [Statistical mechanics of fatigue failure]. Minsk, Nauka i tehnika, 1987. 288 p.
• RD 39-00147105-001-91. Metodika ocenki staticheskoj prochnosti i ciklicheskoj dolgovechnosti magistralnyh nefteprovodov [State Standart 39-00147105-001-91. Method for evaluation of static strength and cyclic life of main oil pipelines]. Ufa, VNIISPTneft, 1992. 87 p.
• Polyakov V.N. Catastrophes of large diameter pipelines – the role of hydrogen fields. Problemy prochnosti [Problems of Strength], 1995, no. 1–2, pp. 137–146.
• Kirkhope K.J., Bell R., Kirkhope J. Stress intensity factor equation for single and multiple cracked pressurized thick-walled cylinders. Int. J. Pres. Ves. and Piping, 1990, no. 1, pp. 103–111.
• Pashkov Yu.I., Rakhman M.Z., Zazhogina O.A. K voprosu o klassifikacii razrushenij gazoprovodov po protjazhennosti [On the classification of the destruction of gas pipelines by length]. Problemy prochnosti [Problems of Strength], 1995, no. 5–6, pp. 136–142.
• Kotrechko S.O. [et al.] Long-term service effect on the toughness of pipeline steel 17GS. Proc. of the Int. Congr. on fracture, IPM, RAS, Interquadrennial conf. “Fracture at multiple dimensions”. Moscow, 2003.
• Botvina L.R. [et al.] Vysokociklovoe ustalostnoe razrushenie malouglerodistoj stali posle ee dlitelnogo starenija [High-cycle fatigue failure of low-carbon steel after its long aging]. Zavodskaja laboratorija [Factory laboratory], 2009, no. 6, pp. 44–51.
• Gumerov A.G., Gumerov R.S., Gumerov K.M. Bezopasnost dlitelno jekspluatiruemyh magistralnyh nefteprovodov [Safety of long-running main oil pipelines]. Moscow, Nedra-Biznescentr, 2003. 310 p.
• Chernyaev K.V., Vasin E.S. Ocenka prochnosti trub s vmjatinami po dannym vnutritrubnyh profilemerov [Estimation of durability of pipes with dents according to the data of in-pipe profilers]. Truboprovodnyj transport nefti [Pipeline transport of oil], 1996, no. 4, pp. 8–12.
• Sosnovskiy L.A. Mehanika iznosoustalostnogo povrezhdenija [Mechanics of wear-and-fatigue damage]. Gomel, BelGUT, 2007. 434 p.
• Bogdanovich A.V. Prognozirovanie predelnyh sostojanij silovyh system [Prediction of the limiting states of power systems]. Grodno, GrGU im. Ja. Kupaly, 2008. 372 p.
• Sosnovskiy L.A., Kozik A.N. Metodika raschetno-jeksperimentalnoj ocenki korrozionno-mehanicheskoj prochnosti tribofaticheskih sistem [Method of calculation and experimental evaluation of the corrosion-mechanical strength of tribo-phase systems]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2011, no. 3(16), pp. 49–53.
• Sosnovskiy L.A., Kostyuchenko A.A., Vorobyev V.V. Inzhenernaja model korrozionno-mehanicheskoj prochnosti [Engineering model of corrosion-mechanical strength]. Ves. Nac. akad. navuk Belarusi. Ser. fiz.-tjehn. navuk [Bulletin of the NAS of Belarus. Edition of Physics and Engineering], 2008, no. 2, pp. 66–70.
• Shcherbakov S.S., Sosnovskiy L.A. Mehanika tribofaticheskih sistem [Mechanics of tribobatic systems]. Minsk, BGU, 2011. 407 p.
• Sosnovskiy L.A., Bogdanovich A.V., Bordovskiy A.M. Zhivuchest linejnoj chasti nefteprovoda [Vitality of the linear part of the oil pipeline]. Gomel, NPO “TRIBOFATIKA”, 2004. 112 p.