Smart Search 



Title of the article

MECHANICS OF DEFORMATION AND STRUCTURE FORMATION IN COMPOSITES BASED ON METAL-POLYMER DISPERSED SYSTEMS

Authors

Ryabchenko T.V., the V.A. Belyy Institute of Mechanics of Metal-Polymer Systems of the NAS of Belarus, Gomel

Kovtun V.A., the V.A. Belyy Institute of Mechanics of Metal-Polymer Systems of the NAS of Belarus, Gomel

Pleskachevsky Yu.M., corresponding member of the NAS of Belarus, the A.V. Lykov Heat and Mass Transfer Institute of the NAS of Belarus, Minsk

In the section MECHANICS OF COMPOSITES
Year 2008 Issue 4 Pages 58-62
Type of article RAR Index UDK 621.762:539.3 Index BBK  
Abstract

The deformation processes of metal-polymer copper-polytetrafluoroethylene powder system have been investigated by computer methods. The structural models have been developed, the values of displacements and stresses have been defined. Strain-induced variations in the zones of contact interactions of dispersed components of powder systems are shown under the influence of a distributed compressive load. Microstructural investigation results of metal-polymer powder systems and their composite materials are presented.

Keywords metal-polymer copper-polytetrafluoroethylene powder system, structural models, composite materials
  You can access full text version of the article.
Bibliography
  • Ayzenkolb F.M. Poroshkovaja metallurgija [Powder metallurgy]. Moscow, Metallurgy, 1959. 520 p.
  • Fedorchenko I.M., Pugin L.I. Kompozicionnye spechennye antifrikcionnye materialy [Composite sintered frictional materials]. Kiev, Nauk. dumka, 1980. 404 p.
  • Kovtun V.A., Pleskachevsky Y.M. Tribotehnicheskie pokrytija na osnove poroshkovyh mednografitovyh sistem [Tribological coatings based on powder copper-graphite systems]. Gomel, MPRI NASB, 1998. 148 p.
  • Vitjaz P.A., Ilyushhenko A.F., Savich V.V. Novye tehnologii poluchenija poroshkov i sovremennyh materialov iz nih, sozdannye v Belarusi za 2004-2005 gg. [New technologies for advanced materials and powders are created in Belarus for 2004-2005]. Trudy “Novye materialy i tehnologii: poroshkovaja metallurgija, kompozicionnye materialy, zashhitnye pokrytija” [Proc. New Materials and Technologies: Powder metallurgy, composite materials, protective coatings], Minsk, 2006, pp. 22-32.
  • Panin V.E. [et al.] Fizicheskaja mezomehanika i komp'juternoe konstruirovanie materialov [Physical mesomechanics and computer design of materials]. Novosibirsk, Nauka, 1995, vol. 2.
  • Panin V.E. [et al.] Strukturnye urovni plasticheskoj deformacii i razrushenija [Structural levels of plastic deformation and fracture]. Novosibirsk, Nauka, 1990. 252 p.
  • Fedotov A.F., Amosov A.P., RadchenkoV.P. Modelirovanie processa pressovanija poroshkovyh materialov v uslovijah samorasprostranjajushhegosja vysokotemperaturnogo sinteza [Modelling of process of pressing of powdered materials in the conditions of self-propagating high-temperature synthesis]. Moscow, Engineering, 2005. 282 p.
  • Antonios Zavaliangos A Multiparticle Simulation of Powder Compaction Using Finite Element Discretization of Individual Particles. Proc. Symp. “Materials Research Society”. 2002, vol. 731, pp. 711-717.
  • Kovtun V.A., Semenova T.V. Issledovanie naprjazhenno-deformirovannogo sostojanija kompozicionnyh materialov na osnove metallicheskoj matricy s polimernym napolnitelem [Investigation of stress-deformed state of composite materials based on metal matrix with a polymeric filler]. Materialy, tehnologii, instrumenty [Materials, technologies, tools], 2004, vol. 9, no. 2, pp. 16-22.Ryabchenko T.V., Kovtun V.A., Pleskachevsky Yu.M.
  • Kovtun V.A., Semenova T.V., Mihovski M. Simulation of microdeformation processes and study of stress-strain state of composites based on a metal matrix with polymer fillers. Journal of theoretical and applied mechanics, 2005, vol. 35, no. 1, pp. 21-36.
  • Kovtun V.A. [et al.] Strain state of metal-polymer powder material under compressive loads during electrocontact sintering. Journal of theoretical and applied mechanics, 2006, vol. 36, no 2, pp. 19-30.
  • Kovtun V.A., Semenova T.V. Vlijanie struktury metallopolimernyh poroshkovyh sistem na naprjazhennoe sostojanie kompozita [Influence of metal-powder systems structures on the stress state of composite]. Ves. Nac. akad. Navuk Belarusi. Ser. fiz.-tjehn. navuk [Bulletin of the NAS of Belarus. Edition of Physics and Engineering], 2007, no. 2, pp. 12-18.
  • Shermergor T.D. Teorija uprugosti mikroneodnorodnyh sred [Elasticity theory of microinhomogeneous media]. Moscow, Nauka, 1977. 400 p.
  • Troshchenko V.T. [et al.] Soprotivlenie materialov deformirovaniju i razrusheniju [Strength of materials deformation and destruction]. Kiev, Nauk. dumka, 1994, vol. 2.
  • Karpinos D.M. Kompozicionnye materialy [Composite materials]. Kiev, Nauk. dumka, 1985. 592 p.
  • Bathe Klaus-Jurgen. Finite Element Procedures. New Jersey, Prentice-Hall, Inc., 1996. 1037 р.
  • Gallagher R. Metod konechnyh jelementov. Osnovy [Finite Element Method. Basics]. Moscow, Mir, 1984. 428 p.