Smart Search 



Title of the article

EVALUATION OF THE APPLICABILITY OF THERMAL SPRAYING IN CASE OF RESTORING RODS OF HYDRAULIC CYLINDERS ACCORDING TO THE CRITERION OF ADHESION STRENGTH OF COATINGS UNDER OPERATION LOADS

Authors

BELOTSERKOVSKY Marat A., D. Sc. in Eng., Assoc. Prof., Head of the Laboratory of Gas-Thermal Methods of Machine Components Hardening, Joint Institute of Mechanical Engineering of National Academy of Sciencies of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

GOMAN Arkady M., Ph. D. in Eng., Head of the Department of Dynamic Analysis and Vibrodiagnostics of Machines, Joint Institute of Mechanical Engineering of National Academy of Sciencies of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

YALOVIK Alexander P., Ph. D. Student, Joint Institute of Mechanical Engineering of National Academy of Sciencies of Belarus, Minsk, Republic of Belarus

In the section TECHNOLOGICAL MECHANICS
Year 2018 Issue 2 Pages 48–54
Type of article RAR Index UDK 621.793 Index BBK  
Abstract

A technique for determining the minimum required strength of the adhesion of coatings when restoring the rods of hydraulic cylinders using gas-thermal technologies is proposed. By calculation it is possible to choose the most effective and economically feasible method of rod restoration based on the conditions of its operation, dimensions and coating material.

Keywords

adhesion strength, coating, hydraulic cylinder rod, reliability

  You can access full text version of the article.
Bibliography
  • Kobzov D.Yu., Tarasov V.A., Trofimov A.A. Gidrotsilindry dorozhnykh i stroitelnykh mashin. Chast 2. Usloviya ekspluatatsii, rabochiy protsess, rezhim raboty i parametry nagruzheniya [Hydraulic cylinders for road and building machines. Part 2. Operating conditions, working process, operating mode and loading parameters]. Deposited in All-Russian Institute for Scientific and Technical Information on January 27, 2011, no. 3552–1399. 108 p.
  • Novikov A.N., Balovnev V.I, Kustarev G.V., Lokshin E.S. Dorozhno-stroitelnye mashiny i kompleksy [Road construction machines and complexes]. Omsk, SibADI Publ., 2001. 528 p.
  • Savinkin V.V. Povyshenie dolgovechnosti vosstanovlennykh detaley elementov gidroprivoda stroitelno-dorozhnykh mashin. Diss. kand. tekhn. nauk [Increase of durability of the restored details of hydraulic drive elements of construction and road machines. Ph. D. Thesis]. Omsk, 2009. 198 p.
  • Nurakov S.N., Tomashets A.K., Savinkin V.V. Primenenie metoda plazmennogo napyleniya dlya vosstanovleniya shtokov gidrotsilindrov [Application of the method of plasma sputtering for the restoration of rod hydraulic cylinders]. Materialy respublikanskoy nauchno-prakticheskoy konferentsii “Kozybaevskie chteniya” 1 ch. [Materials of the republican scientific and practical conference “Kozybaev Readings” P. 1]. Petropavlovsk, 2006, pp. 111–113.
  • Rudenskaya M.V. Uprochnenie shtoka burovogo nasosa plazmennym keramicheskim pokrytiem. Magisterskaya diss. [Hardening of the stem of the drilling pump with a plasma ceramic coating. Mas. Thesis]. St. Petersburg, 2014. 105 p.
  • Verstak A., Baranovski V. Activated Combustion HVAF Coatings for Protection against Wear and High Temperature Corrosion. Proc. of the International Thermal Spray Conference 2003, Orlando, FL, USA. Ohio, 2003, pp. 535–541.
  • Nefedev S.P., Morozov A.N. Plazmenno-poroshkovaya naplavka shtokov gidrotsilindrov belym iznosostoykim chugunom [Plasma-powder surfacing of rods of hydraulic cylinders with white wear-resistant cast iron]. Nauka i obrazovanie[Science and education], 2014, no. 5, pp. 41–49.
  • Golyakevich A.A., Orlov L.N., Student M.M., Pokhmurskaya G.V., Chervinskaya N.G. Vliyanie fazovogo sostava i termicheskoy obrabotki naplavlennykh sloev shtokov gidrotsilindrov na ikh lokalnuyu korroziyu [Influence of phase composition and heat treatment of welded layers of hydraulic cylinders rods on their local corrosion]. Voprosy materialovedeniya [Problems of Materials Science], 2015, no. 1(81), pp. 133–142.
  • Makarenko N.A., Lasovir V.N., Bogutskiy A.A., Granovsky N.A. Vosstanovlenie shtokov gidropressov s pomoshchyu plazma-MIG naplavki [Restoration of hydraulic press rods by means of plasma-MIG surfacing]. Mashinostroenie i inzhenernoe obrazovanie [Mechanical engineering and engineering education], 2010, no. 2, pp. 9–13.
  • Velichko S.A., Chumakov P.V. Tekhnologiya vosstanovleniya shtokov gidrotsilindrov kombinirovannym metodom [Technology of restoration of hydraulic cylinder rods by a combined method]. Selskiy mekhanizator [Farm machinery operator], 2011, no. 7, pp. 36–37.
  • Korchmar A.G. Razrabotka tekhnologii vosstanovleniya i uprochneniya elektroliticheskimi pokrytiyami dlinnomernykh valov selskokhozyaystvennykh mashin: na primere shtokov gidrotsilindrov. Diss. kand. tekhn. nauk [Development of technology of restoration and hardening by electrolytic coatings of longlength shafts of agricultural machines: on the example of rod cylinders. Ph. D. Thesis]. Kishinev, 1991. 193 p.
  • Belotserkovsky M.A., Goman A.M. Uchet ekspluatatsionnykh nagruzok pri vybore metoda uprochneniya-vosstanovleniya bystroiznashivayushchikhsya detaley [Accounting of operational loads when choosing the method of hardening-recovery of wearing parts]. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and materials], 2008, no. 1(2), pp. 74–77.
  • Usov P.P. Opredelenie zony kontakta i kontaktnykh napryazheniy pri vnutrennem soprikosnovenii tsilindricheskikh tel [Determination of contact zone and contact stresses at internal contact of cylindrical bodies]. Mashinovedenie [Machine
    Science], 1981, no. 6, pp. 75–81.
  • Demidov S.P. Teoriya uprugosti [Theory of Elasticity]. Moscow, Vysshaya Shkola Publ., 1979. 432 p.
  • Birger I.A., Panovko G.G. Prochnost, ustoychivost, kolebaniya: spravochnik: v 3 t. [Strength, stability, fluctuations. Reference book (in 3 volumes)]. Moscow, Mashinostroenie Publ., 1968, vol. 2. 463 p.