Smart Search 


2_2011_sen_4

Title of the article

INVESTIGATION OF THE GEARSHIFT PROCESS UNDER LOAD AND OPTIMIZATION CONTROLLING THE FRICTION CLUTCHES OF MECHANICAL TRANSMISSION
Authors

Basalaev V.N., Senior Researcher of the department of Methods of Resource and Functional Design, STC "Mining equipment", Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus

Kovalenko A.V., Candidate of Technical Sciences, Scientific Secretary of the Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICS OF MOBILE MACHINES
Year 2011 Issue 2 Pages 24-32
Type of article RAR Index UDK 629.114:621952 Index BBK  
Abstract Obtained the analytical dependences to reduce the load on a mechanical transmission in gearshift process under load. Proposed optimal control laws for the friction clutches of mechanical transmission that provide the required quality of the process in accordance with established estimated figures.
Keywords

switching under load, manual transmission, shift quality, control laws, optimization, transition, tasks overlapping, estimates, modeling
  You can access full text version of the article.
Bibliography
  • Die Konigsklasse im Test. Top agrar., 1997, no. 11, pp. 60-75.
  • Sechs Fabrricate im Doppeltest. Top agrar., 1998, no. 12, pp. 71-78.
  • Ksendzov N.V. Issledovanie i vybor rezhimov perekljuchenija peredach kolesnogo traktora pod nagruzkoj. Diss. kand. tehn. nauk [Research and selection of modes of gear wheel tractor under load. Cand. techn. sci. diss.]. Minsk, 1979. 17 p.
  • Ostroverhov N.L., Ksendzov V.N. Nagruzhenost' transmissij kolesnyh mashin [Load of transmissions of wheeled vehicles]. Minsk, Nauka i tehnika, 1983. 85 p.
  • L'vovskij K.Ja. [et al.]. Transmissii traktorov [Tractors’ transmissions]. Moscow, Mashinostroenie, 1976. 277 p.
  • Franz Muller, Hubert Sailer. New future - oriented tractor transmission ZF. International off-Highway. SAE Techn. Pap. Ser., 1993. 13 p.
  • Voznesenskij A.N., Timofievskij A.A. Razrabotka jelektrogidravlicheskoj sistemy upravlenija perekljucheniem peredach [Development of electro-hydraulic system of shift control]. Privodnaja tehnika [Drive technics], 2006, no. 1, pp. 15-20.
  • Kurochkin F.F. Metod vybora racional'nyh harakteristik processa perekljuchenija v avtomaticheskoj korobke peredach avtomobilja. Dis. kand. tehn. nauk [Method of selection of rational characteristics of switching process in an automatic transmission of a car. Cand. techn. sci. diss.]. Moscow, 2008. 16 p.
  • Tarasik V.P. Frikcionnye mufty avtomobil'nyh gidromehanicheskih peredach [Friction clutch of automotive hydromechanical transmissions]. Minsk, Nauka i tehnika, 1973. 320 p.
  • Basalaev V.N. Opredelenie ocenochnyh pokazatelej processa perekljuchenija peredach mehanicheskoj transmissii pri provedenii issledovatel'skih ispytanij v dorozhnyh uslovijah [Definition of performance indicators of the shift of mechanical transmission in the research trials on the road]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2009, no. 4 (9), pp. 47-49.
  • Kondrashkin A.S., Lavruhin G.M. Vybor pary trenija dlja frikcionov avtomaticheskoj gidroperedachi legkovyh avtomobilej klassa 1,5-2,0 litra [Selecting of a pair of friction for clutches of automatic hydraulic transmission of cars class 1.5-2.0 liters]. Konstrukcii avtomobilej [Construction of vehicles], 1973, no. 5, pp. 12-16.
  • Basalaev V.N., Algin V.B., Sharangovich A.I. Ustrojstvo opredelenija izmenenija kojefficienta trenija frikcionnyh muft v processe perekljuchenija peredach mehanicheskoj transmissii [Device for definition of change of the coefficient of friction clutches during gear manual transmission]. Patent RB, no. 4243, 2008.