Title of the article

TECHNOLOGICAL PARAMETERS OF FLAME SPRAYING COATINGS THERMOPLASTIC POLYMERS

Authors

Belotserkovsky M.A., Candidate of Technical Sciences; Joint Institute of Mechanical Engineering of the NAS of Belarus; Minsk, the Republic of Belarus

Chekulaev A.V., Joint Institute of Mechanical Engineering of the NAS of Belarus; Minsk, the Republic of Belarus

Kukareko V.A., Doctor of Physical and Mathematical Sciences; Joint Institute of Mechanical Engineering of the NAS of Belarus; Minsk, the Republic of Belarus

In the section TECHNOLOGICAL MECHANICS
Year 2009 Issue 3 Pages 69-74
Type of article RAR Index UDK 621.793 Index BBK  
Abstract

The article includes description of the flame spraying process of thermoplastic polymer coatings in the form of powder and wire. Implemented a theoretical assessment of thermal and dynamic parameters of the jet flame, the spray polymer wire to form a coating. It is shown that the physical and mechanical properties of polymer coatings essentially depend on the initial state (powder, wire), caused by the material. After the formation of coatings by applying layers of polymer powders are predominantly amorphous structure, and after spraying wires mainly crystalline. It was found that the formation of antifriction coatings operating in the tribe-paired with the unit loads of up to 4 MPa can be used as a dispersion of polymer rods, and coating polymer powders. For more loaded friction units should be used only powder coating. It is shown that the modification of a powder charge on the basis of polyamide nano size carbon filler type UDAG enhances the value limit of unit loads, with dry friction from 7 to 10 MPa.

Keywords

Thermoplastic polymer coatings, jet flame, thermal and dynamic parameters, amorphous structure

   
Bibliography
  • Belotserkovsky M.A. Tehnologii aktivirovannogo gazoplamennogo napylenija antifrikcionnyh pokrytij [Technology of activated flame spraying of antifriction coatings]. Minsk, Tekhnoprint Publ., 2004. 200 p.
  • Krechmar E. Napylenie metallov, keramiki i plastmass [Sputtering of metals, ceramics and plastics]. Moscow, Mashinostroenie Publ., 1966. 432 p.
  • Tadmor Z., Gogos K. Teoreticheskie osnovy pererabotki polimerov [Theoretical Foundations of polymer processing]. Moscow, Khiniya Publ., 1984. 632 p.
  • Korobov Yu., Chekulaev A.V.  Modeling of FlameSpraying of Polymer Wire with Nanofillers. Mathematical modeling and computer simulation of material technologies, Ariel, 2008, pp. 265-271.
  • Belotserkovsky M.A.,Pryadko A.S., Cherepko A.E. Metody i oborudovanie dlja formirovanija vysokojenergeticheskih dvuhfaznyh potokov [Methods and equipment for the formation of high-energy two-phase flows]. Fizika plazmy i plazm. Tehn [Plasma physics and plasma. tehn], 1997, vol. 4, pp. 670-673.
  • Tsiklauri G.B., Seleznev L.I. Adiabatnye dvuhfaznye techenija [Adiabatic two-phase flows]. Moscow, Atomizdat Publ., 1973. 448 p.
  • Vityaz P.A. [et al.]. Formirovanie iznosostojkih poverhnostnyh struktur i mehanizm frikcionnogo razrushenija pri trenii v srede smazochnogo materiala, modificirovannogo ul'tradispersnymi almazografitovymi dobavkami. Ch.1. Tribotehnicheskie svojstva [Formation of the wear-resistant surface structures and the mechanism of the destruction of the friction in sliding among the lubricant modified by ultrafine diamondplumbaginous additives. Part 1. tribological properties]. Trenie i iznos [Friction and Wear], 2006, vol. 27, no. 1, pp. 61-68.
  • Karavaev M.G., Kukareko V.A., Berestnev O.V. Avtomatizirovannyj tribometr s vozvratno-postupatelnym dvizheniem [Automated tribometer with reciprocating]. Materialy mezhdunar nauch. tehn. konf: v 2-h t “Nadezhnost mashin i tehnicheskih sistem ” [Materials of the International scientific and technical conference in 2 volumes “Reliability of machines and technical systems”]. Minsk, 2001, vol. 1, pp. 37-39.
  • Novik I.G., Sechko A.E. Voyma V.V. Osobennosti vlijanija nizkotemperaturnogo vozdejstvija na morfologiju poverhnosti, strukturu i svojstva poliamidnyh volokon [Features low temperature impact effect on the surface morphology, structure and properties of polyamide fibers]. Materialy, tehnologii, instrument [Materials, technology, tools], 2009, vol. 14, no. 1, pp. 63-69.
  • Dolmatov V.Yu. Ultradispersnye almazy detonacionnogo sinteza. Poluchenie, svojstva, primenenie [Ultrafine diamonds of detonation synthesis. Preparation, properties and application]. St.Petersburg, SPbGPU Publ., 2003. 344 p.
  • Dolmatov V.Yu. Ultradispersnye almazy detonacionnogo sinteza: svojstva i primenenie [Ultrafine diamonds of detonation synthesis: properties and applications]. Uspehi himii [Russian chemical reviews], 2001, vol. 70, no. 7, pp. 687-708.
  • Wicks Z.W., Jones F.N., Pappas S.P. Science and technology Chichester: John Wiley & Sons Ltd Publ., 1994. 438 p.