3_2019_sen_5

Title of the article

CORRELATION DEPENDENCES BETWEEN MECHANICAL PROPERTIES AND MAGNETIC PARAMETER OF THE 41СR4 STEEL
Authors

SANDOMIRSKII Sergey G., D. Sc. in Eng., Assoc. Prof., Head of the Laboratory of Metallurgy in Mechanical Engineering, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section TECHNOLOGICAL MECHANICS
Year 2019 Issue 3 Pages 43–50
Type of article RAR Index UDK 620.179.14 Index BBK  
Abstract

It is shown that the mechanical properties (relative yield strength σ0,2, tensile strength σв, relative constriction ψ) and hardness HRC of the 41Cr4 (DIN) steel change monotonically when the tempering temperature Tо changes after quenching and closely correlate with each other. The linear regression equations are presented describing interrelations σ0,2, σв and ψ on HRС of the 41Cr4 steel, calculation errors for them and correlation coefficients. It  is shown that the coercive force Hc of the 41Сr4 steel does not have an unambiguous dependence with its hardness HRC over the entire range of variation of Tо, and the relaxation magnetization of the 41Cr4 steel cannot be used for non-destructive testing of its hardness due to low measurement accuracy. For the magnetic structuroscopy of the 41Сr4 steel, parameter Hc1 is proposed, for the calculation of which its Hc and relation of the residual magnetization to the saturation magnetization is used. It is shown that the calculation results of Hc1 do not have a high relative error, clearly depend on Tо of the 41Сr4 steel in the practically important range of its change and are highly sensitive to changes in the hardness HRC of the 41Сr4 steel. The equation for the correlation dependence of HRC on the parameter Hc1 is given. This equation and the equations of dependence of σ0,2, σв and ψ on HRС are used to build correlation dependences of σ0,2, σв and ψ on the parameter Hc1. It is shown that the constructed dependencies can be used for non-destructive magnetic testing of the mechanical properties of the 41Сr4 steel in a practically important range of their variation.
Keywords

medium-carbon alloyed steels, mechanical properties, hardness, nondestructive testing, magnetic structural analysis
   
Bibliography
  1. Sorokin V.G., Volosnikova A.V., Vyatkin S.A., Gervasev M.A., Greditor M.A., Krylova K.M., Kubachek V.V., Mirmelshteyn  V.A. Marochnik staley i splavov [Grade guide of steels and alloys]. Moscow, Mashinostroenie Publ., 1989. 640 p.
  2. Lakhtin Yu.M., Leonteva V.P. Materialovedenie [Metallurgy]. Moscow, Mashinostroenie Publ., 1980. 493 p.
  3. Agamirov L.V., et al. Mashinostroenie. Entsiklopediya: v  40 t. Razd. 2. Materialy v mashinostroenii. T. 2-1. Fiziko-mekhanicheskie svoystva. Ispytaniya metallicheskikh materialov [Mechanical engineering. Encyclopedia: in 40 vol. Section 2. Materials in mechanical engineering. Vol. 2-1. Physical and mechanical properties. Testing of metal materials]. Moscow, Mashinostroenie Publ., 2010. 851 p.
  4. Mikheev M.N., Gorkunov E.S. Magnitnye metody strukturnogo analiza i nerazrushayushchego kontrolya [Magnetic methods of structural analysis and non-destructive testing]. Moscow, Nauka Publ., 1993. 252 p.
  5. Klyuev V.V. Nerazrushayushchiy kontrol: v 8 t. T. 6: v 3 kn. Kn.   1. Magnitnye metody kontrolya [Non-destructive testing: in 8 volumes. Volume 6: in 3 books. Book 1. Magnetic methods of testing]. Moscow, Mashinostroenie Publ., 2006. 848 p.
  6. Sandomirskii S.G. Statisticheskiy analiz vzaimosvyazey mezhdu mekhanicheskimi svoystvami i tverdostyu stali 40Kh [Statistical analysis of the interrelationships between the mechanical properties and hardness of 41Cr4 steel]. Aktualnye voprosy mashinovedeniya [Topical issues of mechanical engineering], 2018, issue 7, pp. 339–341.
  7. State Standard 19693–74. Materialy magnitnye. Terminy i opredeleniya [Magnetic materials. Terms and definitions]. Moscow, Standartov Publ., 1974. 32 p.
  8. State Standard 8.377–80. Materialy magnitomyagkie. Metodika vypolneniya izmereniy pri opredelenii staticheskikh magnitnykh kharakteristik [Soft-magnetic materials. Methods of determination of static magnetic characteristics]. Moscow, Standartov Publ., 1986. 21 p.
  9. Chernyshev E.T., Chechurina E.N., Chernysheva N.G., Studentsov N.V. Magnitnye izmereniya [Magnetic measurements]. Moscow, Standartov Publ., 1969. 248 p.
  10. Bida G.V., Nichipuruk A.P. Magnitnye svoystva termoobrabotannykh staley [Magnetic properties of heat-treated steels]. Yekaterinburg, Uralskoe otdelenie Rossiyskoy akademii nauk Publ., 2005. 218 p.
  11. Tikadzumi S. Fizika ferromagnetizma. Magnitnye kharakteristiki i prakticheskie primeneniya [Physics of ferromagnetism. Magnetic characteristics and practical applications]. Moscow, Mir Publ., 1987. 419 p.
  12. Tsarkova T.P., Bida G.V., Kostin V.N. Izmerenie relaksatsionnoy magnitnoy induktsii na obraztsakh razomknutoy formy [Measurement of the relaxation coercivity and relaxation magnetic induction on open-loop samples]. Moscow, Vserossiyskiy institut nauchnoy i tekhnicheskoy informatsii RAN, 1987. 14 p.
  13. Bida G.V., Tsarkova T.P., Sazhina E.Yu. Vliyanie strukturnykh izmeneniy pri zakalke i otpuske na relaksatsionnye namagnichennost i magnitnuyu vospriimchivost uglerodistykh i nizkolegirovannykh staley [Structural change effects in quenching and tempering upon relaxation magnetization and magnetic susceptibility of carbon and low alloy steels]. Defektoskopiya [Defectoscopy], 1995, no. 2, pp. 72–81.
  14. Bida G.V., Stashkov A.N. Kompleksnoe ispolzovanie magnitnykh svoystv staley pri nerazrushayushchem kontrole kachestva termoobrabotannykh detaley [Multipurpose use of magnetic properties of steels in nondestructive testing of the quality of heat-treated workpieces]. Defektoskopiya [Defectoscopy], 2003, no. 4, pp. 67–74.
  15. Bida G.V. Magnitnye svoystva termouprochnennykh staley i nerazrushayushchiy kontrol ikh kachestva [Magnetic properties of heat-strengthened steels and non-destructive quality testing]. Moscow, Marshrut Publ., 2006. 304 p.
  16. Bida G.V., Nichipuruk A.P. Mnogoparametrovye metody v  magnitnoy strukturoskopii i nerazrushayushchem kontrole mekhanicheskikh svoystv staley [Multiparameter methods in magnetic structuroscopy and nondestructive testing of me-
    chanical properties of steels]. Defektoskopiya [Defectoscopy], 2007, no. 8, pp. 3–24.
  17. Kostin V.N., Tsarkova T.P., Sazhina E.Yu. Izmerenie otnositelnykh znacheniy magnitnykh svoystv veshchestva kontroliruemykh izdeliy v sostavnykh zamknutykh tsepyakh [Measurements of relative magnetic parameters of materials in tested components incorporated in closed circuits]. Defektoskopiya [Defectoscopy], 2001, no. 1, pp.15–26.
  18. Kostin V.N., Osintsev A.A., Stashkov A.N., Tsarkova T.P. Mnogoparametrovye metody strukturoskopii stalnykh izdeliy s ispolzovaniem magnitnykh svoystv veshchestva [Multiparameter methods for structural analysis of steel articles using the magnetic properties of substances]. Defektoskopiya [Defectoscopy], 2004, no. 3, pp. 69–82.
  19. Kostin V.N., Osintsev A.A., Stashkov A.N., Nichipuruk  A.P., Kostin K.V., Sazhina E.Yu. Mobilnye sredstva mnogoparametrovoy magnitnoy strukturoskopii [Portable instruments for multiparameter magnetic evaluation of material structures]. Defektoskopiya [Defectoscopy], 2008, no. 4, pp. 66–77.
  20. Kostin K.V., Kostin V.N., Smorodinskiy Ya.G., Tsarkova T.P., Somova V.M., Sazhina E.Yu. Vybor parametrov i algoritma magnitnoy tverdometrii uglerodistykh termoobrabotannykh staley metodom regressivnogo modelirovaniya strukturoskopii [Choice of the parameters and algorithm for the magnetic hardness testing of thermally treated carbon steels by the method of regression modeling of structuroscopy]. Defektoskopiya [Defectoscopy], 2011, no. 2, pp. 3–11.
  21. Kostin V.N., Smorodinskiy Ya.G. Mnogotselevye apparatno-programmnye sistemy aktivnogo elektromagnitnogo kontrolya kak tendentsiya [Multipurpose software-hardware systems for active electromagnetic testing as a trend]. Defektoskopiya [Defectoscopy], 2017, no. 7, pp. 23–34.
  22. Kostin V.N., Tsarkova T.P., Bida G.V., Bulavinov  A.N. Kompyuternaya sistematizatsiya i analiz svoystv termoobrabotannykh staley [Computer systematization and analysis of heat-treated steel properties]. Defektoskopiya [Defectoscopy], 1999, no. 5, pp. 46–53.
  23. Mastyaeva I.N., Semenikhina O.N. Chislennye metody [Numerical methods]. Moscow, Moskovskiy mezhdunarodnyy institut ekonometriki, informatiki, finansov i prava Publ., 2004. 71 p.
  24. Sandomirskii S.G. Analiz metodicheskoy pogreshnosti izmereniya namagnichennosti staley v protsesse koertsitivnogo vozvrata [Analysis of the systematic error when measuring the magnetization of steels in the coercive recovery process]. Izmeritelnaya tekhnika [Measurement Techniques], 2013, no. 2, pp. 57–60.
  25. Sandomirskii S.G. Vliyanie tochnosti izmereniya i diapazona izmeneniya fizicheskoy velichiny na koeffitsient korrelyatsii mezhdu ee istinnymi znacheniyami i rezultatami izmereniya [Influence of accuracy of measurement and range of variation of physical values on correlation coefficient between true values and measurement results]. Izmeritelnaya tekhnika [Measurement Techniques], 2014, no. 10, pp. 13–17.
  26. Klyuev V.V., Sandomirskii S.G. Analiz i sintez strukturochuvstvitelnykh magnitnykh parametrov staley [Analysis and synthesis of structure-sensitive magnetic parameters of steels]. Moscow, SPEKTR Publ., 2017. 248 p.
  27. Sandomirskii S.G. Ispolzovanie parametrov predelnoy petli gisterezisa dlya sinteza strukturochuvstvitelnykh magnitnykh parametrov staley [Using the parameters of the saturation hysteresis loop for the synthesis of structure-sensitive mag-
    netic parameters of steels]. Kontrol. Diagnostika [Testing. Diagnostics], 2017, no. 11, pp. 26–31.
  28. Sandomirskii S.G. Novyy podkhod k formirovaniyu informatsionnykh parametrov v magnitnoy strukturoskopii (obzor) [New approach to formulation of the informative parameters for magnetic structuroscopy (overview)]. V mire nerazrushayushchego kontrolya [In the world of non-destructive testing], 2019, vol. 22, no. 2, pp. 46–51.
  29. Sandomirskii S.G. Vozmozhnosti kontrolya fiziko-mekhanicheskikh svoystv stali 40Kh po parametram predelnoy petli magnitnogo gisterezisa [Monitoring the physicomechanical properties of 40X steel on the basis of the limiting magnetic hysteresis loop]. Stal [Steel], 2018, no. 5, pp. 46–50.
  30. Sandomirskii S.G. Primenenie informatsionnykh magnitnykh parametrov dlya nerazrushayushchego kontrolya tverdosti sredneuglerodistykh legirovannykh staley [Application of magnetic information parameters for non-destructive testing of the hardness of medium carbon alloyed steels]. Izmeritelnaya tekhnika [Measurement techniques], 2019, no. 8, pp. 53–57.
  31. Kalosha V.K., Lobko S.I., Chikova T.S. Matematicheskaya obrabotka rezultatov eksperimenta [Mathematical processing of experimental results]. Minsk, Vysheyshaya shkola Publ., 1982. 103 p.