3_2021_sen_7

Title of the article DEVELOPMENT OF THE COMPONENT COMPOSITION OF THE BIODEGRADABLE LIQUID LUBRICANT FOR SAW CHAINS
Authors

ZHORNIK Viktor I., D. Sc. in Eng., Prof., Head of the Department of Technologies of Mechanical Engineering and Metallurgy — Head of the Laboratory of Nanostructured and Superhard Materials, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ZAPOLSKY Andrey V., Ph. D. Student of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

IVAKHNIK Anton V., Ph. D. in Eng., Leading Researcher of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

PARNITSKY Alexander M., Ph. D. in Eng., Senior Researcher of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MATERIALS SCIENCE IN MECHANICAL ENGINEERING
Year 2021
Issue 3(56)
Pages 70–82
Type of article RAR
Index UDK 669.018.95
DOI https://doi.org/10.46864/1995-0470-2021-3-56-70-82
Abstract The procedure of working out of the component composition of the biodegradable liquid lubricant for the saw chains is shown. The experimental statistical mathematical model is developed for the optimization of the formulation of the main base taking into account the necessary viscosity and temperature parameters. At the same time the kinematic viscosity of the base body at the temperature of 40 °C and its pure point are chosen as the optimization criteria and the following three factors are used as the optimization parameters: the content of vegetable (rapeseed) oil in the composition, the viscosity of mineral oil at the temperature of 40 °C and the content of an adhesive additive in the base composition. The component composition of the lubricant is adjusted to achieve the required level of tribological properties of the saw chain oil and to ensure the stability of all its characteristics during storage (at least 12 months) and operation at a given level of biodegradability (at least 90 %). In particular, the biodegradable calcium sulfonate grease OIMOL KSC BIO was selected as an additive to improve tribological parameters. The special adhesive additive for vegetable oils of the Petrolad 484BD brand is used to increase the sedimentation stability, and the highly refined oil of group III according to the API standard is recommended to use as a mineral component. The developed lubricant has the following characteristics: density at 15 °C — 926 kg/m3, kinematic viscosity at 40 °C — 47.3 mm2/s, kinematic viscosity at 100 °C — 9.9 mm2/s, viscosity index — 202, pour point — –28 °C, flash point — 272 °C, critical load — 872 N, welding load — 1,600 N, wear index at 200 N — 0.39 mm, biodegradability — 93 %.
Keywords liquid lubricant, saw chain, vegetable oil, experimental and statistical model, rheological and tribological properties, property stability, biodegradability
  You can access full text version of the article.
Bibliography
  1. Derevyago I.P. Kontseptsiya “zelenoy ekonomiki” i vozmozhnosti ee realizatsii v usloviyakh Respubliki Belarus [“Green economy” concept and possibilities of its implementation in the context of the Republic of Belarus]. Belarusian economic journal, 2017, no. 1, pp. 24–37 (in Russ.).
  2. Streltsov V.V., Strebkov S.V. Tendentsii ispolzovaniya biologicheskikh smazochnykh materialov [Tendencies of use of biological lubricants]. “Vestnik of Federal State Educational Establishment of Higher Professional Education “Moscow State Agroengineering University named after V.P. Goryachkin”, 2009, no. 2, pp. 66–69 (in Russ.).
  3. Evdokimov A.Yu., Fuks I.G., Shabalina T.P. Smazochnye materialy i problemy ekologii [Lubricants and environmental issues]. Moscow, GUP “Neft i gaz” Publ., 2000. 424 p. (in Russ.).
  4. Devyanin S.N., Markov V.A., Semenov V.G. Rastitelnye masla i topliva na ikh osnove dlya dizelnykh dvigateley [Vegetable oils and fuels based on them for diesel engines]. Moscow, FGOU VPO MGAU Publ., 2018. 340 p. (in Russ.).
  5. Fuks I.G., Evdokimov A.Yu., Dzhamalov A.A., Luksa A. Rastitelnye i zhivotnye zhiry – syre dlya prigotovleniya tovarnykh smazochnykh materialov [Vegetable and animal fats – raw materials for the preparation of commercial lubricants]. Khimiya i tekhnologiya topliv i masel, 1992, no. 4, pp. 34–39 (in Russ.).
  6. Zapolskiy A.V. Biorazlagaemye smazochnye materialy – vazhneyshiy produkt smazochnoy industrii budushchego [Biodegradable lubricants – the most important product of the future lubricant industry]. Novaya ekonomika, 2018, no. 1, pp. 226–229 (in Russ.).
  7. State Standard 32433-2013. Metody ispytaniy khimicheskoy produktsii predstavlyayushchey opasnost dlya okruzhayushchey sredy. Otsenka biorazlagaemosti organicheskikh soedineniy metodom opredeleniya dioksida ugleroda v zakrytom sosude [Test methods for chemical products that pose a risk to the environment. Assessment of the biodegradability of organic compounds by the method of determining carbon dioxide in a closed vessel]. Moscow, Standartinform Publ., 2019. 18 p. (in Russ.).
  8. Evdokimov A.Yu., Fuks I.G., Lyubinin I.A. Smazochnye materialy v tekhnosfere i biosfere: ekologicheskiy aspekt [Lubricants in the technosphere and biosphere: ecological aspect]. Kiev, Atika-N Publ., 2012. 292 p. (in Russ.).
  9. Dhorali G., Venkata P.C. Vegetable oil based bio-lubricants and transformer fluids. Applications in power plants. East, Singapore, Springer Nature Singapore Pte Ltd., 2018. 152 р.
  10. State Standard 20799-88. Masla industrialnye. Tekhnicheskie usloviya [Industrial oils. Specifications]. Moscow, Standartinform Publ., 2005. 7 p. (in Russ.).
  11. State Standard 31759-2012. Maslo rapsovoe. Tekhnicheskie usloviya [Rapeseed oil. Specifications]. Moscow, Standartinform Publ., 2014. 17 p. (in Russ.).
  12. State Standard 3900-85. Neft i nefteprodukty. Metody opredeleniya plotnosti [Petroleum and petroleum products. Methods for determination of density]. Moscow, Standartinform Publ., 2006. 36 p. (in Russ.).
  13. State Standard 33-2016. Neft i nefteprodukty: prozrachnye i neprozrachnye zhidkosti. Opredelenie kinematicheskoy i dinamicheskoy vyazkosti [Petroleum and petroleum products. Transparent and opaque liquids. Determination of kinematic and dynamic viscosity]. Moscow, Standartinform Publ., 2019. 55 p. (in Russ.).
  14. State Standard 20287-91. Nefteprodukty. Metody opredeleniya temperatur tekuchesti i zastyvaniya [Petroleum products. Methods of test for flow point and pour point]. Moscow, Standartinform Publ., 2006. 9 p. (in Russ.).
  15. State Standard 6356-75. Nefteprodukty. Metod opredeleniya temperatury vspyshki v zakrytom tigle [Petroleum products. Method of test for flash point boy closed cup]. Moscow, Standartinform Publ., 2006. 5 p. (in Russ.).
  16. State Standard 9490-75. Materialy smazochnye zhidkie i plastichnye. Metod opredeleniya tribologicheskikh kharakteristik na chetyrekhsharikovoy mashine [Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball mashine]. Moscow, IPK standartov Publ., 2002. 8 p. (in Russ.).
  17. Karavaev M.G., Kukareko V.A. Avtomatizirovannyy tribometr s vozvratno postupatelnym dvizheniem [Automated tribometer with reciprocating motion]. Materialy Mezhdunarodnoy nauchno tekhnicheskoy konferentsii “Nadezhnost tekhnicheskikh sistem” [Proc. International scientific and technical conference “Reliability of technical systems”]. Minsk, 2001, vol. 1, pp. 37–39 (in Russ.).
  18. State Standard 1036-75. Smazki plastichnye. Metod opredeleniya mekhanicheskikh primesey [Plastic lubricants. Method of determination of mechanical impurities]. Moscow, Standartinform Publ., 2006. 4 p. (in Russ.).
  19. State Standard 1547-84. Masla i smazki. Metody opredeleniya nalichiya vody [Oils and greases. Methods for determination of water presence]. Moscow, IPK standartov Publ., 2002. 4 p. (in Russ.).
  20. Rudnick L.R. Lubricant additives. Boca Raton, CRC Press, 2009. 790 p.
  21. Fessenbecker A., Roehrs I., Pegnoglou R. Additives for environmentally acceptable lubricant. NLGI Spokesman: Journal of the National Lubricating Grease Institute, 1996, no. 6(60), pp. 9–25.
  22. O'Brien R.D. Fats and oils: formulating and processing for applications. CRC Press, 2003. 616 p.
  23. Oblashchikova I.R. Issledovanie rapsovogo masla v kachestve osnovy alternativnykh smazochnykh materialov. Avtoref. diss. kand. tekhn. nauk [Research of rapeseed oil as the basis of alternative lubricants. Extended Abstract of Ph. D. Thesis]. Moscow, 2004. 103 p. (in Russ.).
  24. Zhornik V.I., Zapolsky A.V., Ivakhnik A.V., Ivakhnik V.P., Tychinskaya L.Yu. Novyy podkhod k polucheniyu biorazlagaemykh plastichnykh smazok [New approach to the production of biodegradable greases]. Tezisy dokladov Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii “Polimernye kompozity i tribologiya (Polikomtrib-2019)” [Abstracts of papers of the International scientific and technical conference “Polymer composites and tribology (Polycomtrib-2019)”]. Gomel, 2019, p. 0189 (in Russ.).
  25. Spiridonov A.A. Planirovanie eksperimenta pri issledovanii tekhnologicheskikh protsessov [Planning of an experiment in the study of technological processes]. Moscow, Mashinostroenie Publ., 1981. 184 p. (in Russ.).
  26. Zhornik V.I., Zapolsky A.V., Ivakhnik A.V., Parnitsky A.M. Development of the method and optimization of the composition and modes of obtainingthe biodegradable grease with the lithium-calcium thickener. Mechanics of machines, mechanisms and materials, 2021, no. 2(55), pp. 60–72.
  27. Zhornik V.I., Ivakhnik A.V., Zapolsky A.V. Plastichnye smazki s geterogennoy dispersnoy fazoy dlya tyazhelonagruzhennykh i vysokotemperaturnykh uzlov treniya [Heterogeneous dispersed phase greases for heavy-duty and high-temperature friction units]. Innovatsionnye tekhnologii v mashinostroenii, Novopolotsk, 2020, pp. 56–59 (in Russ.).
  28. Ivakhnik A.V., et al. Sozdanie obshchetekhnicheskikh mnogotselevykh plastichnykh smazok s kompleksom vysokikh bioekotriboparametrov [Creation of general technical multi-purpose greases with a complex of high bioecotriboparameters]. Tezisy dokladov “Alternativnye istochniki syrya i topliva”, 2019, p. 47 (in Russ.).
  29. State Standard 32552-2015. Standartnyy metod ispytaniy dlya opredeleniya aerobno vodnogo biokhimicheskogo razlozheniya smazok ili ikh komponentov v zakrytom respirometre [Standard test method for determining the aerobic-aqueous biochemical decomposition of lubricants or their components in a closed respirometer]. Minsk, Evraziyskiy sovet po standartizatsii metrologii i sertifikatsii Publ. 16 p. (in Russ.).
  30. Leontev V.N., et al. Ispytanie obraztsov smazochnykh materialov na biorazlagaemost [Testing of lubricant samples for biodegradability]. Materialy dokladov 85-y nauchno tekhnicheskoy konferentsii “Tekhnologiya organicheskikh veshchestv” [Proc. 85th scientific and technical conference “Organic matter technology”]. Minsk, 2021, pp. 349–351 (in Russ.).