KONSTANTINOV Valerij M., D. Sc. in Eng., Prof., Head of the Department “Materials Science in Mechanical Engineering”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

LESHOK Vladislav A., Ph. D. Student, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SHTEMPEL Oleg P., Associate Professor of the Department of Motor Transport, Euphrosyne Polotskaya State University of Polotsk, Novopolotsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Minkevich A.N. Khimiko-termicheskaya obrabotka stali [Chemical-thermal treatment of steels]. Moscow, Mashgiz Publ., 1950. 432 p. (in Russ.).
2. Panteleenko F.I., Lyakhovich L.S., Kukharev B.S. O klassifikatsii sposobov intensifikatsii protsessov khimiko-termicheskoy obrabotki metallov i splavov [On the classification of methods for intensifying the processes of chemical-thermal treatment of metals and alloys]. Metallurgiya, 1980, iss. 14, pp. 5–6 (in Russ.).
3. Chudina O.V. Kombinirovannoe poverkhnostnoe uprochnenie stali (lazernoe legirovanie + azotirovanie) [Combined surface hardening of steel (laser alloying + nitriding)]. Metallovedenie i termicheskaya obrabotka metallov, 2010, no. 5, p. 27 (in Russ.).
4. Balandin Yu.A., Kolpakov A.S., Zharkov E.V. Diffuzionnoe mnogokomponentnoe tsinkovanie stali 40Kh v vibrokipyashchem sloe [Dry multicomponent galvanizing of steel 40Kh in vibrobubbling bed]. Metallovedenie i termicheskaya obrabotka metallov, 2009, no. 1(643), pp. 46–49 (in Russ.).
5. Kukareko V.A., Gacuro V.M., Grigorchik A.N., Chichin A.N. Matematicheskoe modelirovanie i mekhanizm ukrupneniya austenitnogo zerna pri vysokotemperaturnom nagreve legirovannykh konstruktsionnykh staley [Mathematical modeling and mechanism of coarsening of austenitic grain at high-temperature heating of alloyed structural steels]. Mechanics of machines, mechanisms and materials, 2019, no. 3(48), pp. 58–68 (in Russ.).
6. Kukareko V.A., Konstantinov V.M., Vereshchak N.A., Grigorchik A.N. Struktura tekhnicheskogo titana, podvergnutogo nizkotemperaturnomu ionnomu azotirovaniyu [Structure of technical titanium subjected to low-temperature ionic nitriding]. Mechanics of machines, mechanisms and materials, 2022, no. 1(58), pp. 48–55. DOI: https://doi.org/10.46864/1995-0470-2022-1-58-48-55 (in Russ.).
7. Petrova L.G., et al. Intensifikatsiya protsessov khimiko-termicheskoy obrabotki staley [Intensification of the processes of chemical-thermal treatment of steels]. Moscow, MADI Publ., 2019. 160 p. (in Russ.).
8. Kuksenova L.I., Alekseeva M.S. Vliyanie predvaritelnoy obrabotki na tribotekhnicheskie kharakteristiki konstruktsionnykh azotirovannykh staley [Effect of preliminary treatment on tribotechnical characteristics of nitrided structural steels]. Metallovedenie i termicheskaya obrabotka metallov, 2023, no. 1(811), pp. 34–42. DOI: https://doi.org/10.30906/mitom.2023.1.34-42 (in Russ.).
9. Farber V.M. Vklad diffuzionnykh protsessov v strukturoobrazovanie pri intensivnoy kholodnoy plasticheskoy deformatsii metallov [Contribution of diffusion processes to structure formation upon intensive cold deformation of metals]. Metallovedenie i termicheskaya obrabotka metallov, 2002, no. 8, pp. 3–9 (in Russ.).
10. Aliev A.A., Voroshnin L.G. Borirovanie iz past [Borating from pastes]. Astrakhan, Astrakhanskiy gosudarstvennyy tekhnicheskiy universitet Publ., 2006. 287 p. (in Russ.).
11. Skakov Yu.A. Vysokoenergeticheskaya plasticheskaya deformatsiya, diffuziya i mekhanokhimicheskiy sintez [High-energy cold plastic deformation, diffusion and mechanochemical synthesis]. Metallovedenie i termicheskaya obrabotka metallov, 2004, no. 4(586), pp. 3–12 (in Russ.).
12. Khina B.B., Lovshenko G.F., Konstantinov V.M., Formanek B. Matematicheskaya model tverdofaznoy diffuzii pri periodicheskoy plasticheskoy deformatsii [Mathematical model of solid-phase diffusion under periodic plastic deformation]. Metallophysics and advanced technologies, 2005, vol. 27, no. 5, pp. 609–623 (in Russ.).
13. Konstantinov V.M. Uskorennaya diffuziya legiruyushchikh elementov v zheleze pri khimiko-termicheskoy obrabotke poroshkov vo vrashchayushchemsya konteynere [Accelerated diffusion of alloying elements in iron during chemical-thermal treatment of powders in a rotating container]. Doklady of the National Academy of Sciences of Belarus, 2007, vol. 51, no. 2, pp. 103–107 (in Russ.).
14. Bokshteyn S.Z. Diffuziya i struktura metallov [Diffusion and structure of metals]. Moscow, Metallurgiya Publ., 1973. 208 p. (in Russ.).
15. Kovalevskaya Zh.G. Struktura i svoystva poverkhnostnykh sloev i pokrytiy pri modifitsiruyushchey ultrazvukovoy obrabotke. Diss. dokt. tekhn. nauk [Structure and properties of surface layers and coatings during modifying ultrasonic treatment. D. Sc. Thesis]. Tomsk, 2018. 334 p. (in Russ.).
16. Belyaev V.I., et al. Vysokoskorostnaya deformatsiya metallov [High-speed deformation of metals]. Minsk, Nauka i tekhnika Publ., 1976. 224 p. (in Russ.).
17. Shtremel M.A. Prochnost splavov. Chast II. Deformatsiya [Strength of alloys. Part II. Deformation]. Moscow, MISIS Publ., 1997. 527 p. (in Russ.).
18. Konstantinov V.M., Panteleenko F.I., Shtempel O.P. Issledovanie protsessa diffuzionnogo legirovaniya metallicheskikh poroshkov dlya zashchitnykh pokrytiy [Investigation of the process of diffusion alloying of metal powders for protective coatings]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya B. Promyshlennost. Prikladnye nauki, 2002, vol. 1, no. 2, pp. 49–56 (in Russ.).