Title of the article STRUCTURE AND PROPERTIES OF POWDER MATERIALS BASED ON MECHANOSYNTHESIZED METAL MATRIX COMPOSITES Ni-TiC
Authors

KOVALIOVA Svetlana A., Ph. D. in Eng., Assoc. Prof., Leading Researcher of the Laboratory of Nanostructured and Superhard Materials of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ZHORNIK Viktor I., D. Sc. in Eng., Prof., Head of the Department of Mechanical Engineering and Metallurgy of the R&D Center “Mechanical Engineering Technologies and Processing Equipment” – Head of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

VITYAZ Pyotr A., Academician of the NAS of Belarus, D. Sc. in Eng., Prof., Chief Researcher of the Laboratory of Nanostructured and Superhard Materials of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

GRIGOREVA Tatiana F., D. Sc. in Chem., Leading Researcher of the Laboratory of Chemical Materials Science, Institute of Solid State Chemistry and Mechanochemistry of the Siberian Branch of the RAS, Novosibirsk, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

DUDINA Dina V., D. Sc. in Eng., Senior Researcher of the Laboratory of Chemical Materials Science, Institute of Solid State Chemistry and Mechanochemistry of the Siberian Branch of the RAS, Novosibirsk, Russian Federation; Leading Researcher of the Laboratory for the Synthesis of Composite Materials, M.A. Lavrentiev Institute of Hydrodynamics of the Siberian Branch of the RAS, Novosibirsk, Russian Federation,
This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

UKHINA Arina V., Ph. D. in Chem., Senior Researcher of the Laboratory of Solid State Ionics, Institute of Solid State Chemistry and Mechanochemistry of the Siberian Branch of the RAS, Novosibirsk, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

VIDYUK Tomila M., Ph. D. in Chem., Researcher of the Laboratory of Chemical Materials Science, Institute of Solid State Chemistry and Mechanochemistry of the Siberian Branch of the RAS, Novosibirsk, Russian Federation; Junior Researcher of the Laboratory of Physics of Multiphase Media, Khristianovich Institute of Theoretical and Applied Mechanics of the Siberian Branch of the RAS, Novosibirsk, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

VOSMERIKOV Sergey V., Researcher of the Laboratory of Chemical Materials Science, Institute of Solid State Chemistry and Mechanochemistry of the Siberian Branch of the RAS, Novosibirsk, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

DEVYATKINA Evgeniya T., Researcher of the Laboratory of Chemical Materials Science, Institute of Solid State Chemistry and Mechanochemistry of the Siberian Branch of the RAS, Novosibirsk, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

LYAKHOV Nikolay Z., Academician of the RAS, D. Sc. in Chem., Prof., Scientific Director of the Institute, Head of the Laboratory of Chemical Materials Science, Institute of Solid State Chemistry and Mechanochemistry of the Siberian Branch of the RAS, Novosibirsk, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MATERIALS SCIENCE IN MECHANICAL ENGINEERING
Year 2024
Issue 1(66)
Pages 71–79
Type of article RAR
Index UDK 621.762.2
DOI https://doi.org/10.46864/1995-0470-2024-1-66-71-79
Abstract The article considers the mechanochemical preparation of TiC-Ni composites in reaction mixtures of Ti-C-Ni powders and the formation of the structure of materials during their sintering under pressure. The synthesis was carried out in an AGO-2 planetary ball mill with a mixture processing time of 12 and 20 min; their subsequent sintering was performed at a temperature of 950 °C and a pressure of 130 MPa. The results of diffraction studies are presented for structural-phase transformations in mixtures of equimolar composition of titanium and carbon depending on the nickel content in the range of 50–70 wt.%. It is established that an increase in the Ni concentration leads to a decrease in the size of the formed TiCx crystallites from 29 ± 1 to 16 ± 1 nm. A high carbon content TiC0.88–0.98 carbide is formed in Ti-C-(50 and 60 %)Ni compositions and non-stoichiometric TiC0.62–0.78 at 70 % Ni. The microstructure of dispersion-strengthened grains of the nickel solid solution is formed during sintering of TiC/(50–60 %)Ni mechanocomposites. Titanium carbide inclusions have a spherical shape and a diameter of 60–100 nm. When sintering TiC/70%Ni, depleted titanium carbide has a grain boundary distribution with the formation of large (~400 nm) agglomerates. The microhardness of sintered materials is in the range of 850–900 HV.
Keywords mechanocomposites, titanium carbide, nickel, mechanochemical synthesis, mechanostimulated reactions, metal matrix composite, dispersion-hardened structure
  You can access full text version of the article.
Bibliography
  1. Borkar T., et al. Excellent strength-ductility combination in nickel-graphite nanoplatelet (GNP/Ni) nanocomposites. Journal of alloys and compounds, 2015, vol. 646, pp. 135–144. DOI: https://doi.org/10.1016/j.jallcom.2015.06.013.
  2. Grashchenkov D.V., Efimochkin I.Yu., Bolshakova A.N. Vysokotemperaturnye metallomatrichnye kompozitsionnye materialy, armirovannye chastitsami i voloknami tugoplavkikh soedineniy [High-temperature metal-matrix composite materials reinforced with particles and fibers of refractory compounds]. Aviation materials and technologies, 2017, pp. 318–328. DOI: http://dx.doi.org/10.18577/2071-9240-2017-0-S-318-328 (in Russ.).
  3. Yang S., Zhong M., Liu W. TiC particulate composite coating produced in situ by laser cladding. Materials science and engineering: A, 2003, vol. 343, iss. 1–2, pp. 57–62. DOI: https://doi.org/10.1016/S0921-5093(02)00361-1.
  4. Wu H., Wu Z., Li Y., Cao J., Zhang C., Hong J., Li X. Enhancing the hardness and wear resistance of a TiC-Ni composite coating on grade 2 pure titanium by electron beam remelting. Applied physics A: Materials science & processing, 2023, vol. 129, iss. 5. DOI: https://doi.org/10.1007/s00339-023-06593-2.
  5. Zohari S., Sadeghian Z., Lotfi B., Broeckmann C. Application of spark plasma sintering (SPS) for the fabrication of in situ Ni–TiC nanocomposite clad layer. Journal of alloys and compounds, 2015, vol. 633, pp. 479–483. DOI: https://doi.org/10.1016/j.jallcom.2015.01.276.
  6. Mo T., Chen J., Bai W., Wu Y., Zhang P., Zheng B. Ni/TiC composite electrodeposition on the surface of Ni-based superalloy. Surface and coatings technology, 2021, vol. 424. DOI: https://doi.org/10.1016/j.surfcoat.2021.127611.
  7. Ren X., Zhang Y., Tian J., Wang H., Chai B., Meng C. Microstructure and properties of Ni-nano TiC composite coating prepared by different electrodeposition methods. Acta materiae compositae sinica, 2022, vol. 39, no. 8, pp. 4093–4101. DOI: https://doi.org/10.13801/j.cnki.fhclxb.20211018.003 (in Chinese).
  8. Walunj G., et al. Mechanical and tribological behavior of mechanically alloyed Ni-TiC composites processed via spark plasma sintering. Materials, 2020, vol. 13, iss. 22. DOI: https://doi.org/10.3390/ma13225306.
  9. Rahaei M.B., Yazdani-Rad R., Kazemzadeh A., Ebadzadeh T. Mechanochemical synthesis of nano TiC powder by mechanical milling of titanium and graphite powders. Powder technology, 2012, vol. 217, pp. 369–376. DOI: https://doi.org/10.1016/j.powtec.2011.10.050.
  10. Lyakhov N., et al. Rapid mechanochemical synthesis of titanium and hafnium carbides. Journal of materials science, 2018, vol. 53, iss. 19, pp. 13584–13591. DOI: https://doi.org/10.1007/s10853-018-2450-x.
  11. Grigoreva T.F., et al. Mekhanokhimicheski stimulirovannye reaktsii polucheniya karbida titana [Mechanochemically induced reactions concerning the titanium carbide obtainment]. Melts, 2016, no. 6, pp. 467–475 (in Russ.).
  12. Ghiasi H., Raygan S. Synthesis of Ni–TiC сomposite by ball milling and heat treatment of NiO/TiO2/C Powder Mixture. Transactions of the Indian Institute of Metals, 2020, vol. 73, iss. 1, pp. 81–92. DOI: https://doi.org/10.1007/s12666-019-01805-x.
  13. Dudina D.V., et al. Structural features of tantalum carbide-copper composites obtained by liquid phase-assisted spark plasma sintering. Ceramics international, 2022, vol. 48, iss. 21, pp. 32 556–32 560. DOI: https://doi.org/10.1016/j.ceramint.2022.07.322.
  14. Kolobov Yu.R., et al. Issledovaniya termicheskoy stabilnosti mikrostruktury titana, sformirovannoy vozdeystviem intensivnoy plasticheskoy deformatsii [Studies of the thermal stability of titanium microstructure formed by the action of intense plastic deformation]. Izvestiya vuzov. Fizika, 2011, no. 8, pp. 77–95 (in Russ.).
  15. Podergin V.A. Metallotermicheskie sistemy [Metallothermic systems]. Moscow, Metallurgiya Publ., 1992. 271 p. (in Russ.).
  16. Diagrammy sostoyaniya dvoynykh metallicheskikh system [Diagrams of the state of double metal systems]. Moscow, Mashinostroenie Publ., 1996. 992 p. (in Russ.).
  17. Portnoi V.K., Leonov A.V., Mudretsova S.N., Fedotov S.A. Formation of nickel carbide in the course of deformation treatment of Ni-C mixtures. The physics of metals and metallography, 2010, vol. 109, iss. 2, pp. 153–161. DOI: https://doi.org/10.1134/S0031918X10020079.
  18. Burkov P.V. Issledovanie tverdykh splavov na osnove karbida titana s nikelidom titana [Investigation of hard alloys based on titanium carbide with titanium nickelide]. Bulletin of the Kuzbass State Technical University, 2008, no. 6, pp. 40–44 (in Russ.).
  19. Deidda C., Delogu F., Cocco G. In situ characterization of mechanically-induced self-propagating reactions. Journal of materials science, 2004, vol. 39, iss. 16–17, pp. 5315–5318. DOI: https://doi.org/10.1023/B:JMSC.0000039236.48464.8f.
  20. Deidda C., Doppiu S., Monagheddu M., Cocco G. A direct view of self combustion behaviour of the TiC system under milling. Journal of metastable and nanocrystalline materials, 2003, vol. 15–16, pp. 215–220. DOI: https://doi.org/10.4028/www.scientific.net/JMNM.15-16.215.
  21. Shkiro V.M., Borovinskaya I.P. Kapillyarnoe rastekanie zhidkogo metalla pri gorenii smesi titana s uglerodom [Capillary spreading of liquid metal during combustion of mixtures of titanium and carbon.]. Fizika goreniya i vzryva, 1976, no. 6, pp. 945–948 (in Russ.).
  22. Zhilyaev V.A., Patrakov E.I., Fedorenko V.V. Khimicheskie osnovy zhidkofaznogo spekaniya TiC- i Ti(C,N)-kermetov. Chast 1. Zakonomernosti protsessov rastvoreniya, fazo- i strukturoobrazovaniya v sistemakh TiC-Ni i TiC-Ni/Mo [Chemical basis of liquid phase sintering of TiC- and Ti(C,N)-cermets. Part 1. Regularities of processes of dissolution, phase- and structure formation in systems TiC-Ni and TiC-Ni/Mo]. Vestnik Permskogo natsionalnogo issledovatelskogo politekhnicheskogo universiteta, 2012, vol. 14, no. 1, pp. 32–40 (in Russ.).