2_2024_sen_6

Title of the article SUBSTANTIATION OF RATIONAL DESIGN OF CRANK MECHANISM OF A WHEEL-STEP MOVER
Authors

SKOYBEDA Anatol T., D. Sc. in Eng., Prof., Professor of the Department “Mechanical Engineering and Machine Parts”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ZHUKAVETS Vasili M., Lecturer of the Department “Commercial and Advertising Equipment”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICAL ENGINEERING COMPONENTS
Year 2024
Issue 2(67)
Pages 44–52
Type of article RAR
Index UDK 629.3.038:621.833.5
DOI https://doi.org/10.46864/1995-0470-2024-2-67-44-52
Abstract The article substantiates the rational design of the crank mechanism of a wheel-step mover. Kinematics analysis of a prototype of the wheel-step mover revealed the presence of oscillations in the vertical coordinate of the central axis during movement. To eliminate this drawback, differential geometry methods were used, thanks to which a method for calculating the non-circular profile of support shoes was created. Studies of the dynamics of the crank mechanism of the wheel-step mover showed that even in a steady state of motion, periodically acting inertial forces arise. To reduce their effect, non-circular gears should be used in the mover power drive. The dimensions of the crank mechanism links have been calculated, at which the cross-country ability of the running system, its kinematics and dynamics characteristics are improved, energy costs when laying a track are reduced, as well as the negative impact of the machine on the fertile soil layer. The polar coordinates of the involute points have been calculated. They are needed to construct the tooth profiles of non-circular gears. As the power drive of the crank mechanism, non-circular gears have symmetrical geometric parameters along two axes and provide a constant movement speed. Thus, the wheel-step running system can be used in agriculture, the timber industry, mining, and when working in emergency situations. The mover design being developed is intended for unmanned ground vehicles. This type of unmanned vehicles is at the initial stage of its development, inferior in frequency to air and marine unmanned vehicles. A targeted concentration of production and financial resources is necessary to ensure that domestic industry has a leading position in the production and sale of unmanned ground vehicles.
Keywords crank mechanism, wheel-step mover, non-circular gears, unmanned ground vehicles
  You can access full text version of the article.
Bibliography
  1. Zhukavets V.M. Povyshenie prokhodimosti bespilotnogo nazemnogo apparata s kolesno-shagayushchey khodovoy sistemoy [Increasing the maneuverability of an unmanned ground vehicle with a wheel-step running system]. Vserossiyskaya nauchno-tekhnicheskaya konferentsiya s mezhdunarodnym uchastiem, posvyashchennaya 90-letiyu so dnya rozhdeniya laureata Gosudarstvennoy premii SSSR, doktora tekhnicheskikh nauk, professora Dmitrieva Lva Borisovicha “Problemy i perspektivy razvitiya avtomatizatsii tekhnologicheskikh protsessov” [All-Russian Scientific and Technical Conference, dedicated to the 90th anniversary of the USSR State Prize laureate, D. Sc. in Eng., Prof. Dmitriev Lev Borisovich “Problems and prospects for the development of process automation”]. Tula, 2023, pp. 227–233 (in Russ.).
  2. Bekker M.G. Introduction to terrain-vehicle systems. Part I: The terrain. Part II: The vehicle. Ann Arbor, University of Michigan Press, 1969. 846 p.
  3. Kotovich S.V. Dvizhiteli spetsialnykh transportnykh sredstv. Chast I [Movers of special vehicles. Part I]. Moscow, Moskovskiy avtomobilno-dorozhnyy gosudarstvennyy tekhnicheskiy universitet (MADI) Publ., 2008. 161 p. (in Russ.).
  4. Okhotsimskiy D.Е., Golubev Yu.F. Mekhanika i upravlenie dvizheniem avtomaticheskogo shagayushchego apparata [Mechanics and motion control of an automatic walking apparatus]. Moscow, Nauka Publ., 1984. 310 p. (in Russ.).
  5. Briskin E.S., Zhoga V.V., Chernyshev V.V., Maloletov A.V. Osnovy rascheta i proektirovaniya shagayushchikh mashin s tsiklovymi dvizhitelyami [Fundamentals of calculation and design of walking machines with cyclic movers]. Moscow, Mashinostroenie-1 Publ., 2006. 163 p. (in Russ.).
  6. Lapshin V.V. Mekhanika i upravlenie dvizheniem shagayushchikh mashin [Mechanics and motion control of walking machines]. Moscow, MGTU im. N.E. Baumana Publ., 2012. 199 p. (in Russ.)
  7. Skoybeda A.T., Zhukavets V.M. Ratsionalnyy profil opornykh bashmakov kolesno-shagayushchego dvizhitelya [Rational profile of wheel-step mover slipper heads]. Science and technique, 2013, no. 6, pp. 38–42 (in Russ.).
  8. Skoybeda A.T., Zhukavets V.M. Postroenie evolventnykh profiley zubev nekruglykh zubchatykh koles v privode kolesno-shagayushchego dvizhitelya [Construction of involute profiles of teeth of non-circular gears in the drive of the wheel-step mover]. Teoreticheskaya i prikladnaya mekhanika, 2022, iss. 37, pp. 203–216 (in Russ.).
  9. Skoybeda A.T., Zhukavets V.M. Obosnovanie ratsionalnoy skhemy silovogo privoda kolesno-shagayushchey khodovoy sistemy [Substantiation of the rational scheme of the power drive of a wheel-step running system]. Teoreticheskaya i prikladnaya mekhanika, 2023, iss. 38, pp. 170–180 (in Russ.).
  10. Kemurdzhian A.L., et al. Planetokhody [Planetary rovers]. Moscow, Mashinostroenie Publ., 1993. 400 p. (in Russ.)
  11. Perezhilova Е.D. Issledovanie vozmozhnosti sozdaniya kolesno-shagayushchego marsokhoda [Study of the possibility of creating a wheel-step rover for Mars]. Innovatsii. Nauka. Obrazovanie, 2021, no. 33, pp. 1352–1363 (in Russ.).
  12. Gladov G.I., Petrenko А.М. Spetsialnye transportnye sredstva. Teoriya [Special vehicles. Theory]. Moscow, Akademkniga Publ., 2006. 215 p. (in Russ.).
  13. Briskin E.S., Chernyshev V.V., Maloletov A.V., Sharonov N.G. Sravnitelnyy analiz kolesnykh, gusenichnykh i shagayushchikh mashin [Comparative analysis of wheeled, tracked and walking machines]. Robotics and technical cybernetics, 2013, no. 1, pp. 6–14 (in Russ.).
  14. Pavlovskiy V.E. O razrabotkakh shagayushchikh mashin [For elaboration of walking machines]. 2013. Available at: https://keldysh.ru/papers/2013/prep2013_101.pdf (in Russ.).
  15. Chernyshev V.V., Goncharov A.A., Arykantsev V.V. Modelirovanie mekhaniki kontaktnogo vzaimodeystviya opornykh elementov shagayushchikh robotov pri bolshikh tyagovykh usiliyakh [Modeling of contact interaction mechanics of the walking robots’ support elements at high tractive efforts]. Robotics and technical cybernetics, 2019, vol. 7, no. 1, pp. 53–57. DOI: https://doi.org/10.31776/RTCJ.7107 (in Russ.).
  16. Monin I.A. Povyshenie prokhodimosti amfibiyno-vezdekhodnykh transportnykh sredstv [Improvement of cross-country capability of amphibian-landrover transport aids]. Herald of the Bauman Moscow State Technical University. Series mechanical engineering, 2007, no. 3, pp. 91–101 (in Russ.).
  17. Zhukavets V.M., Tsukhlo V.S. Izgotovlenie plastikovykh prototipov nekruglykh zubchatykh koles dlya privoda kolesno-shagayushchego dvizhitelya [Manufacturing of plastic prototypes of non-circular gears for driving a wheel-step mover]. Natsionalnaya nauchno-tekhnicheskaya konferentsiya s mezhdunarodnym uchastiem “Avtomatizatsiya: problemy, idei, resheniya “APIR-28” [National Scientific and Technical Conference with international participation “Automation: problems, ideas, solutions “APIS-28”]. Tula, 2023, pp. 211–219 (in Russ.).