VITYAZ Petr A., Academician of the NAS of Belarus, D. Sc. in Eng., Prof., Co-Chairman of the Council, Research and Production Center “OJSC “BSW — Management Company of “BMC” Holding” – NAS of Belarus”, Minsk, Republic of Belarus

TOLSTOY Aliaksandr V., Ph. D. in Phys. and Math., Assoc. Prof., Academic Secretary of the Council, Research and Production Center “OJSC “BSW — Management Company of “BMC” Holding” – NAS of Belarus”, Minsk, Republic of Belarus; Deputy Head of the Laboratory of Metallurgy in Mechanical Engineering of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus; This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Vityaz P.A., Tolstoy A.V., Vengura A.V. Nauchnoe obespechenie modernizatsii kholdinga “Belorusskaya metallurgicheskaya kompaniya” [Scientific support for the modernization of the Holding “Belarusian Metallurgical Company”]. Foundry production and metallurgy, 2019, no. 1, pp. 11–17. DOI: https:// doi.org/10.21122/1683-6065-2019-1-11-17 (in Russ.). 
2. Vityaz P.A., Tolstoy A.V. O deyatelnosti Soveta NPTs OAO “BMZ” – NAN Belarusi” [About the activities of the board of the SPC of OJSC “BSW” – NAS of Belarus”]. Foundry production and metallurgy, 2022, no. 4, pp. 139–143. DOI: https://doi. org/10.21122/1683-6065-2022-4-139-143 (in Russ.). 
3. Vitiaz P.A., Tolstoy A.V. Rezultaty vypolneniya zadaniy podprogrammy “Metallurgiya” GPNI “Mekhanika, metallurgiya, diagnostika v mashinostroenii” na 2021–2025 gody, zavershennykh v 2023 godu [Task fulfillment results under the subprogram “Metallurgy” of the State Program “Mechanics, Metallurgy, Diagnostics in Mechanical Engineering” for 2021–2025, completed in 2023]. Mechanics of machines, mechanisms and materials, 2025, no. 1(70), pp. 84–94. DOI: https://doi. org/10.46864/1995-0470-2025-1-70-84-94 (in Russ.). 
4. Antonyuk V.E., et al. Razrabotka osnovnykh trebovaniy k avtomatizirovannomu uchastku termicheskoy obrabotki koltseraskatnogo kompleksa [Development of basic requirements for an automated heat treatment site of a ring‑rolling complex]. Foundry production and metallurgy, 2022, no. 2, pp. 97–103. DOI: https://doi.org/10.21122/1683-6065-2022-2-97- 103 (in Russ.).
5. Kudelko I.U., Sidorenko A.G., Sotnikov M.V. Issledovanie prichin razrusheniya krupnogabaritnykh podshipnikov karernykh avtosamosvalov [Research of destruction causes of large-sized bearings of mining dump trucks]. Mechanics of machines, mechanisms and materials, 2023, no. 4(65), pp. 31–37. DOI: https://doi.org/10.46864/1995-0470-2023-4-65-31-37 (in Russ.). 
6. Sosnovskiy I.A., Belotserkovskiy M.A., Kurilyonok A.A. Optimizatsiya protsessa naplavki pokrytiy na osnove alyuminievykh splavov tsentrobezhnym induktsionnym metodom [Optimization of the process of surfacing coatings based on aluminum alloys by the centrifugal induction method]. Sovremennye metody i tekhnologii sozdaniya i obrabotki materialov. Kn. 2. Tekhnologii i oborudovanie mekhanicheskoy i fiziko-tekhnicheskoy obrabotki, 2023, pp. 236–246 (in Russ.). 
7. Vityaz P.A., Tolstoy A.V., Sadokha M.A. Analiz sostoyaniya liteynykh proizvodstv Respubliki Belarus [Status analysis of the foundries in the Republic of Belarus]. Foundry production and metallurgy, 2019, no. 3, pp. 35–40. DOI: https://doi. org/10.21122/1683-6065-2019-3-35-40 (in Russ.). 
8. Vityaz P.A., Tolstoy A.V., Sadokha M.A. Puti povysheniya effektivnosti liteynykh proizvodstv Respubliki Belarus [Ways to improve the efficiency of Foundries of The Republic of Belarus]. Foundry production and metallurgy, 2019, no. 4, pp. 81– 89. DOI: https://doi.org/10.21122/1683-6065-2019-4-81-89 (in Russ.). 
9. Akhmetov T.A., et al. Sposoby povysheniya plasticheskikh svoystv kholodnodeformirovannoy armatury [Methods of increasing the plastic properties of cold-worked reinforcement]. Foundry production and metallurgy, 2018, no. 1(90), pp. 110–112. DOI: https://doi.org/10.21122/1683-6065-2018-1-110-112 (in Russ.). 
10. Rozhkova O.V. Vliyanie raskislyayushchego poroshka na kachestvo vnutrenney poverkhnosti goryachekatanykh trub [Influence of deoxidizing powder on the internal surface of hotrolled pipes]. Foundry production and metallurgy, 2019, no. 1, pp. 61–65. DOI: https://doi.org/10.21122/1683-6065-2019-1-61-65 (in Russ.). 
11. Anelkin N.I., Kirilenko O.M., Marushkevich V.E., Mozgov S.A. Primenenie energoeffektivnykh tekhnologiy v ramkakh realizatsii investitsionnogo proekta “Organizatsiya proizvodstva sortovogo prokata so stroitelstvom melkosortno-provolochnogo stana» v OAO “BMZ” — upravlyayushchaya kompaniya kholdinga “BMK” [The use of energy efficient technologies in the framework of implementation of investment project “Organization of production of rolled bar iron with the construction of small-section wire rolling mill” OJSC “BSW – Management Company of Holding “BMC”]. Foundry production and metallurgy, 2018, no. 1(90), pp. 90–95. DOI: https://doi. org/10.21122/1683-6065-2018-1-90-95 (in Russ.). 
12. Anelkin N.I., Mantsevich A.V., Voitekhovsky D.G., Mozgov S.A. Osnovnye napravleniya razvitiya otechestvennoy metallurgii v razreze mirovykh tendentsiy [The main directions of national metallurgy development in the context of global trends]. Foundry production and metallurgy, 2023, no. 2, pp. 31–44. DOI: https://doi.org/10.21122/1683-6065-2023-2-31-44 (in Russ.). 
13. Rafalski I.V., Lushchik P.E., Morozov D.S., Pokrovski A.I. Modelirovanie protsessa formirovaniya litoy struktury vysokoprochnogo chuguna [Modeling the formation of cast structures in ductile iron]. Metallurgy, 2021, iss. 42, pp. 137–147 (in Russ.). 
14. Pokrovskiy A.I., Marukovich E.I. Vysokoprochnye ausferritnye (beynitnye) chuguny dlya otvetstvennykh izdeliy [Highstrength austferritic (bainitic) cast iron for critical products]. Trudy 30-y mezhdunarodnoy nauchnoo-tekhnicheskoy konferentsii “Liteynoe proizvodstvo i metallurgiya 2022. Belarus” [Proc. 30th international scientific and technical conference “Foundry and metallurgy 2022. Belarus”]. Minsk, 2022, pp. 35–40 (in Russ.). 
15. Chaus A.S., Čaplovič L., Pokrovskii A.I., Sobota R. Microstructure and properties evaluation of ductile cast iron subjected to hot plastic deformation and ambient temperature compression. Archives of metallurgy and materials, 2023, vol. 68, iss. 2, pp. 639–648. DOI: https://doi.org/10.24425/amm.2023.142445. 
16. Pokrovsky A.I Osobennosti strukturoobrazovaniya grafitnykh vklyucheniy v vysokoprochnom chugune pri lite i goryachey plasticheskoy deformatsii [Features of structure formation of graphite inclusions in ductile cast iron during casting and hot plastic deformation]. Chernye metally, 2023, no. 4, pp. 8–15. DOI: https://doi.org/10.17580/chm.2023.04.02 (in Russ.). 
17. Pokrovsky A.I Mekhanizm plasticheskoy deformatsii grafitnykh vklyucheniy v vysokoprochnom chugune pri obrabotke davleniem [The mechanism of plastic deformation of graphite inclusions in high-strength cast iron during metal forming]. Chernye metally, 2023, no. 6, pp. 52–60. DOI: https://doi. org/10.17580/chm.2023.06.08 (in Russ.). 
18. Bazrov B.M., et al. Klassifikatsiya obektov i protsessov proizvodstva pri tsifrovizatsii zhiznennogo tsikla izdeliy [Classification of production objects and processes in digitalization of the life cycle of products]. Aktualnye voprosy mashinovedeniya, 2021, iss. 10, pp. 386–390 (in Russ.). 
19. Daineko A.E., et al. Integrirovannye sistemy na baze mezhdunarodnykh standartov menedzhmenta kachestva [Integrated systems on the basis of international standards of quality management]. Aktualnye voprosy mashinovedeniya, 2022, iss. 11, pp. 363–368 (in Russ.).  
20. Daineko A.E., et al. Integrirovannaya sistema menedzhmenta na osnove organizatsionno-tekhnicheskoy struktury predpriyatiya [Integrated management system based on the organizational and technical structure of a company]. Aktualnye voprosy mashinovedeniya, 2023, iss. 12, pp. 299–302 (in Russ.).