KONSTANTINOV Valerij M., D. Sc. in Eng., Prof., Head of the Department “Materials Science in Mechanical Engineering”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

LESHOK Vladislav A., Assistant Lecturer of the Department “Materials Science in Mechanical Engineering”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Minkevich A.N. Khimiko-termicheskaya obrabotka metallov i splavov [Thermochemical treatment of metals and alloys]. Moscow, Mashinostroenie Publ., 1965. 493 p. (in Russ.). 
2. Voroshnin L.G., Mendeleeva O.L., Smetkin V.A. Teoriya i tekhnologiya khimiko-termicheskoy obrabotki [Theory and technology of thermochemical treatment]. Moscow, Novoe znanie Publ.; Minsk, Novoe znanie Publ., 2010. 304 p. (in Russ.). 
3. Borisenok G.V., et al. Khimiko-termicheskaya obrabotka metallov i splavov [Thermochemical treatment of metals and alloys]. Moscow, Metallurgiya Publ., 1981. 424 p. (in Russ.). 
4. Arzamasov B.N., et al. Materialovedenie [Materials science]. Moscow, Moskovskiy gosudarstvennyy tekhnicheskiy universitet imeni N. E. Baumana Publ., 2003. 648 p. (in Russ.). 
5. Kidin I.N., Andryushechkin V.M., Volkov V.V., Kholin A.S. Elektrokhimiko-termicheskaya obrabotka metallov i splavov [Electrochemical and thermal treatment of metals and alloys]. Moscow, Metallurgiya Publ., 1978. 320 p. (in Russ.). 
6. Panteleenko F.I., Lyakhovich L.S., Kukharev B.S. O klassifikatsii sposobov intensifikatsii protsessov khimiko-termicheskoy obrabotki metallov i splavov [On classification of methods for intensification of thermochemical treatment processes of metals and alloys]. Metallurgiya, 1980, iss. 14, pp. 5–6 (in Russ.). 
7. Petrova L.G., Aleksandrov V.A., Demin P.E., Sergeeva A.S. Intensifikatsiya protsessov khimiko-termicheskoy obrabotki staley [Intensification of thermochemical treatment processes of steels]. Moscow, Moskovskiy avtomobilno-dorozhnyy gosudarstvennyy tekhnicheskiy universitet Publ., 2019. 160 p. (in Russ.).
8. Konstantinov V.M., Kukareko V.A. Puti energosberezheniya pri termicheskoy i khimiko-termicheskoy obrabotke stalei za schet uskoreniya diffuzionnykh protsessov [Ways of energy saving during thermal and chemicalthermal treatment of steel due to acceleration of diffusion processes]. Foundry production and metallurgy, 2023, no. 4, pp. 72–80. DOI: https://doi. org/10.21122/1683-6065-2023-4-72-80 (in Russ.). 
9. Kukareko V.A., Gacuro V.M., Grigorchik A.N., Chichin A.N. Matematicheskoe modelirovanie i mekhanizm ukrupneniya austenitnogo zerna pri vysokotemperaturnom nagreve legirovannykh konstruktsionnykh staley [Mathematical modeling and mechanism of coarsening of austenitic grain at high-temperature heating of alloyed structural steels]. Mechanics of machines, mechanisms and materials, 2019, no. 3(48), pp. 58–68 (in Russ.). 
10. Kukareko V.A., Chichin A.N., Valko A.L., Rudenko S.P., Tarasevich I.Yu. Vliyanie rezhima nagreva staley 20KhN3A i 20KhGNMB na razmer austenitnogo zerna, formiruyushchegosya pri vysokotemperaturnoy termicheskoy obrabotke [Influence of heating mode of steels 20ХН3А (20KhN3A) and 20ХГНМБ (20KhGNMB) on the size of austenitic grain formed during high-temperature heat treatment]. Aktualnye voprosy mashinovedeniya, 2020, iss. 9, pp. 273–275 (in Russ.). 
11. Kukareko V.A. Zakonomernosti rosta austenitnogo zerna v stali 18KhNVA [Regularities of growth of austenitic grain in 18KhNVA steel]. Metallovedenie i termicheskaya obrabotka, 1981, no. 9, pp. 15–17 (in Russ.). 
12. Voroshnin L.G., Konstantinov V.V. Aktualnye problemy khimiko- termicheskoy obrabotki [Topical problems of thermochemical treatment]. Vestnik BNTU, 2002, no. 4, pp. 22–26 (in Russ.). 
13. Voroshnin L.G., Voroshnin A.L. Novye podkhody k sozdaniyu i ispolzovaniyu poroshkovykh nasyshchayushchikh sred dlya khimiko-termicheskoy obrabotki [New approaches to the development and use of powder saturating media for thermochemical treatment]. Proceedings of the Academy of Sciences of Belarus. Physical-technical series, 1997, no. 3, pp. 13–17 (in Russ.). 
14. Konstantinov V.M. Diffuzionno-legirovannye splavy dlya zashchitnykh pokrytiy. Diss. dokt. tekhn. nauk [Diffusion-alloyed alloys for protective coatings. D. Sc. Thesis]. Minsk, 2008. 474 p. (in Russ.). 
15. Protasevich G.F., Voroshnin L.G. Izobretatelskaya rabota v oblasti khimiko-termicheskoy obrabotki metallov [Inventive activity in the field of thermochemical treatment of metals]. Metallovedenie i termicheskaya obrabotka metallov, 1988, no. 5, pp. 26–30 (in Russ.). 
16. Konstantinov V.M., Leshok V.A. Aktivatsiya termodiffuzionnogo nasyshcheniya nizkouglerodistoy stali metodom okisleniya poverkhnosti [Activation of thermodiffusion saturation of low-carbon steel by surface oxidation]. Nauchye trudy 8 mezhdunarodnoy nauchnoy konferentsii “Fundamentalnye issledovaniya i innovatsionnye tekhnologii v mashinostroenii” [Proc. 8th international scientific conference “Fundamental research and innovative technologies in mechanical engineering”]. Moscow, 2024, pp. 117–118 (in Russ.). 
17. Konstantinov V.M., Leshok V.A., Shtempel O.P. Analiz vliyaniya predvaritelnoy i tsiklicheskoy plasticheskoy deformatsii na khimiko-termicheskuyu obrabotku konstruktsionnykh staley [Analysis of the effect of preliminary and cyclic plastic deformation on the chemical-thermal treatment of structural steels]. Mechanics of machines, mechanisms and materials, 2024, no. 1(66), pp. 37–42. DOI: https://doi.org/10.46864/1995- 0470-2024-1-66-37-42 (in Russ.). 
18. Ilinskiy V.A., Zhukov A.A., Kostyleva L.V., Loktyushkin V.A. Sverkhbystroe pereraspredelenie ugleroda v tsementovannykh sloyakh stalnykh izdeliy [Ultrafast redistribution of carbon in carburized layers of steel products]. Metally, 1998, no. 3, pp. 46–50 (in Russ.). 
19. Farber V.M. Vklad diffuzionnykh protsessov v strukturoobrazovanie pri intensivnoy kholodnoy plasticheskoy deformatsii metallov [Contribution of diffusion processes to structure formation during intense cold plastic deformation of metals]. Metallovedenie i termicheskaya obrabotka metallov, 2002, no. 8, pp. 3–9 (in Russ.). 
20. Shtremel M.A. V kakuyu storonu idet diffuziya [To which direction diffusion proceeds]. Metallovedenie i termicheskaya obrabotka metallov, 2004, no. 4, pp. 12–13 (in Russ.). 
21. Bokshtein S.Z. Diffuziya i struktura metallov [Diffusion and structure of metals]. Moscow, Metallurgiya Publ., 1973. 208 p. (in Russ.). 
22. Honeycombe R.W.K. The plastic deformation of metals. Cambridge, Edward Arnold (Publishers) Ltd, 1988. 
23. Kolbasnikov N.G. Teoriya obrabotki metallov davleniem. Fizicheskie osnovy prochnosti i plastichnosti metallov [Theory of metal forming. Physical fundamentals of strength and plasticity of metals]. Saint Petersburg, 2004. Available at: http://elib.spb stu.ru/dl/local/637.pdf (accessed February 1, 2026) (in Russ.). 
24. Sidor J.J., et al. Assessment of dislocation density by various techniques in cold rolled 1050 aluminum alloy. Metals, 2021, vol. 11, iss. 10. DOI: https://doi.org/10.3390/met11101571. 
25. Odnobokova M., Belyakov A., Kaibyshev R. Development of nanocrystalline 304L stainless steel by large strain cold working. Metals, 2015, vol. 5, iss. 2, pp. 656–668. DOI: https://doi. org/10.3390/met5020656. 
26. Tanaka Y., Takaki S., Tsuchiyama T., Uemori R. Effect of grain size on the yield stress of cold worked iron. ISIJ international, 2018, vol. 58, iss. 10, pp. 1927–1933. DOI: https://doi. org/10.2355/isijinternational.ISIJINT-2018-371.