1_2014_sen_3

Title of the article

EXPERIMENTAL CONSTRUCTION OF FULL ROLLING FATIGUE CURVE OF COUPLE HIGH_STRENGTH CAST “IRON VCHTG / STEEL 18HGT” AND ITS ANALYSIS
Authors

Sosnovskiy L.A., Doctor of Technical Sciences, Professor, Professor of the Department “Structural mechanics”, Belarusian State University of Transport, Gomel, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it..
Komissarov V.V., Candidate of Technical Science, Associate Professor, Senior Researcher, Belarusian State University of Transport, Gomel, Republic of Belarus
Taranova E.S., Senior Researcher, Belarusian State University of Transport, Gomel, Republic of Belarus
Tyurin S.А., Leading Specialist of the Laboratory of Wear-fatigue Tests, OAO “GOMSELMASH”, Gomel, Republic of Belarus
In the section DYMAMICS DURABILITY OF VEHICLES AND STRUCTURES
Year 2014 Issue 1 Pages 32-39
Type of article RAR Index UDK 681.532.6 Index BBK  
Abstract Experimental creation of full rolling fatigue curve in the range of durability from N p = 1 (static loading) to 10 8 cycles on the basis of integrated criterion of achievement of a limit state (rapprochement of axes of a specimen and counter specimen δc = δ lim ~ 100 microns) is executed at test of the contact pair high-strength cast-iron ВЧТГ / steel 18XГТ". The basic patterns and obtain the basic characteristics of rolling fatigue resistance. The passport of operability of studied pair is offered and constructed.
Keywords rolling fatigue, contact pair, full rolling fatigue curve, criterion of limit state, rapprochement of axes, pitting
  You can access full text version of the article
Bibliography
  • Troshhenko V.T., Sosnovskij L.A. Soprotivlenie ustalosti metallov i splavov [Fatigue resistance of metals and alloys]. Kiev, Nauk. Dumka Publ., 1987.  
  • Sosnovskiy L.A., Mahutov N.A. O polnoj krivoj ustalosti [About full fatigue curve]. Zavodskaja laboratorija. Diagnostika materialov [Plant laboratory. Diagnosis of materials], 1995, no. 5, pp. 33-34. 
  • Sosnovskiy L.A., Tjurin S.A., Taranova E.S. O polnoj krivoj ustalosti [About full fatigue curve]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2012, no. 2(19), pp. 41-49. 
  • Mahutov N.A., Sosnovskij L.A., Marchenko A.V. O postroenii krivoj frikcionnoj ustalosti [About the construction of friction fatigue curve]. Zavodskaja laboratorija. Diagnostika materialov [Plant laboratory. Diagnosis of materials], 1998, no. 12, pp. 36-39. 
  • Sosnovskiy L.A., Marchenko A.V. Frikcionnaja ustalost' polimera pri trenii po stali [Friction fatigue of polymer during friction through steel]. Problemy prochnosti [Strength problems], 2001, no. 1, pp. 48-61. 
  • GOST 31381-2009. Kolesa zubchatye. Vidy povrezhdenij. Klassifikacija i opisanie [State Standard 31381-2009. Gear wheels. Types of injuries. Classification and description]. Minsk, 2009. 65 p. 
  • Trubin G.K. Kontaktnaja ustalost' materialov dlja zubchatyh koles [Contact fatigue of materials for gears]. Moscow, 1962. 404 p. 
  • Vil'chek A.I., Sidorenko M.V., Kutepov B.N. Issledovanie kontaktnoj vynoslivosti kompleksnolegirovannyh teplostojkih stalej [Study of contact fatigue of complex-heat-resistant steels]. Vestnik SevGTU [Herald SevSTU]. Sevastopol', SevNTU Publ., 2010, pp. 204-207. 
  • Petrusevich A.I. Kontaktnaja prochnost' detalej mashin [Contact strength of machine parts]. Moscow, Mashinostroenie Publ., 1969. 64 p. 
  • Orlov A.V., Chermenskij O.N., Nesterov V.M. Ispytanie konstrukcionnyh materialov na kontaktnuju ustalost' [Test of construction materials on contact fatigue]. Moscow, Mashinostroenie Publ., 1980. 10 p. 
  • Kolesnikov Ju.V., Morozov E.M. Mehanika kontaktnogo razrushenija [Mechanics of contact destruction]. Moscow, Nauka Publ., 1989. 219 p. 
  • Pinegin S.V. Kontaktnaja prochnost' i soprotivlenie kacheniju [Contact resistance and rolling resistance]. Moscow, Mashinostroenie Publ., 1969. 234 p.
  • Raschety i ispytanija na prochnost' v mashinostroenii. Metody ispytanij na kontaktnuju ustalost': R 50-54-30-87. [Calculations and tests of strength in mechanical engineering. Test methods for contact fatigue: R 50-54-30-87.]. Moscow, Izd-vo standartov, 1987. 93 p. 
  • Bernshtejn M.L. Metallovedenie i termicheskaja obrabotka stali [Metallurgy and heat treatment of steel]. Moscow, Metallurgija Publ., vol. 1, 1991. 462 p.
  • Lahtin Ju.M. Metallovedenie i termicheskaja obrabotka metallov [Metallurgy and heat treatment of metals]. Moscow, Metallurgija Publ., 1983. 360 p.
  • Saverin M.M. Kontaktnaja prochnost' materialov [Contact strength of materials]. Moscow, Mashgiz Publ., 1946. 148 p.
  • GOST 30754-2001. Tribofatika. Metody iznosoustalostnyh ispytanij. Ispytanija na kontaktno-mehanicheskuju ustalost' [State Standard 30754-2001. Tribo-fatigue. Methods of wear-fatigue tests. Tests for contact-mechanical fatigue]. Minsk, 2002. 32 p.
  • Pavlov Z.P. Vynoslivost' rabochih poverhnostej zub'ev pri peremennoj nagruzke [Durability of working surfaces of teeth under variable load]. Vestnik mashinostroenija [Herald of mechanical engineering], no. 3, 1953.
  • Korablev A.I., Reshetov D.N. Povyshenie nesushhej sposobnosti i dolgovechnosti zubchatyh peredach [Upgrading of loading capacity and durability of gears]. Moscow, Mashinostroenie Publ., 1968. 288 p.
  • Beljanin A.I. Issledovanie faktorov, vlijajushhih na nagruzochnuju sposobnost' zubchatyh peredach [Study of factors influencing on the load capacity of gears]. Leningrad, 1957.
  • Murashko V.P., Zablonskij K.I. Kontaktnaja vynoslivost' tjazhelonagruzhennyh zubchatyh koles pri stupenchatom rezhime nagruzhenija [Back-to-back endurance of heavy-loaded gears under stepwise loading condition]. Odessa, OPI Publ., no. 3, 1959.
  • Kalkert W.T. Lebens dauer-versuchungen an breiten ungehearteter Zahnradern. Industrie Anzeigen, no. 9, vol. III, 1961.
  • GOST 30755-2001. Tribofatika. Mashiny dlja iznosoustalostnyh ispytanij. Obshhie tehnicheskie trebovanija [State standard 30755-2001. Machines for wear-fatigue tests. General specifications]. Minsk, 2002. 8 p.
  • STB 1758-2007. Tribofatika. Metod sovmeshhennyh ispytanij na izgibnuju i kontaktnuju ustalost' materialov zubchatyh koles (Standart Belarusi) [STB 1758-2007. Tribo-fatigue. Method of combined tests on bending and contact fatigue of materials for tooth wheels (Standard of Belarus)]. Minsk, GOSSTANDART, 2007. 45 p.
  • Mahutov N.A. [et al.]. Metod sovmeshhennyh ustalostnyh ispytanij modelej zubchatyh zaceplenij [The method of combined fatigue testing tooth wheels’ models]. Zavodskaja laboratorija. Diagnostika materialov [Plant laboratory. Diagnostic materials], 2005, vol. 71, no. 1, pp. 55-57.
  • Teskep E.I. [et al.]. Metodologija opredelenija kriteriev predel'nyh sostojanij vysokonagruzhennyh zubchatyh peredach transmissij i privodov [Methodology for determining the limit state criteria of heavy-load gear of transmissions and drives]. Vestnik mashinostroenija [Herald of mechanical engineering], 2008, no. 2, pp. 12-17.
  • Zablonskij K.I., Semenov D.L. Ob ustanovlenii edinogo kriterija kontaktnoj ustalosti rabochih poverhnostej zub'ev [About the establishment of a single criterion of contact fatigue of teeth working surfaces]. Izvestija vuzov [Proceedings of higher education]. Mashinostroenie Publ., 1966, no. 11, pp. 35-43.
  • Semenov D.L. Vlijanie stepeni povrezhdenija aktivnyh poverhnostej zub'ev vykrashivaniem na parametry krivyh kontaktnoj ustalosti [The influence of damage degree of active surfaces of teeth by chipping on the parameters of curves of contact fatigue]. Kiev, Tehnika Publ., 1990.
  • Komissarov V.V. O sistematizacii kriteriev nadezhnosti zubchatyh peredach [About systematization of criteria of gears reliability]. Trudy IV Mezhdunarodnoi nauchno-prakticheskoi konferencii “Problemy bezopasnosti na transporte” [Proc. IV Int. Sci. Prac. Konf. “Security problems in transport”]. Gomel', 2007, pp. 71-72.
  • Mashin Ju.V. Preduprezhdenie pittinga krupnomodul'nyh peredach putem korrektirovki rabochih poverhnostej zub'ev v uslovijah jekspluatacii. Dis. kand. tehn. nauk [Warning of pitting of coarse-grained transmissions by adjusting working surfaces of teeth in operating conditions. Cand. tech. sci. diss.]. Mogilev, 2008. 24 p.