THE DEPENDENCE OF THE PROCESS OF DYNAMIC STABILIZATION WAS CALCULATED IN THE TIME OF  MANUFACTURE OF MECHANICAL ENGINEERING'S DETAILS

Antoniuk V.E., Doctor of Technical Sciences, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

The basic requirements are formulated and the basic settlement dependences by calculation of a mode of loading for realization of process of dynamic stabilization are given. Results of use of the executed calculations are resulted at introduction of process of dynamic stabilization for manufacturing frictional disks. Recommendations for further use of dynamic stabilization are given at manufacturing details of mechanical engineering.

cyclic loading, hysteresis loop, clutch discs, dynamic stabilization, setting, sequence diagram, correcting, resource

• Antonjuk V.E. Dinamicheskaja stabilizacija geometricheskih parametrov detalej znakoperemennym nagruzheniem [Dynamic stabilization of geometric parameters of parts with alternating loading]. Minsk, Tehnoprint, 2004. 184 p.
• Antonjuk V.E., Berestnev O.V. Osnovnye polozhenija dinamicheskoj stabilizacii geometricheskih form detalej [Main provisions of dynamic stabilization of geometries forms of details]. Dokl. Nac. akad. nauk Belarusi [Report of the National Acad. of Sciences of Belarus], 2005, vol. 49, no. 3, pp. 98–102.
• Ekobori T. Fizika i mehanika razrushenija tverdyh tel [Physics and mechanics of solids fracture]. Moscow, Metallurgija, 1971. 264 p.
• Ivanova V.S. Sinergetika razrushenija i mehanicheskie svojstva [Synergetics of destruction and mechanical properties]. Sb. st. “Sinergetika i ustalostnoe razrushenie” [Synergetics and fatigue failure: a collection of articles]. Moscow, Nauka, 1989, pp. 6–29.
• Troshhenko V.T. Deformirovanie i razrushenie metallov pri mnogociklovom nagruzhenii [Deformation and fracture of metals at multicyclic loading]. Kiev, Nauk. dumka, 1981. 344 p.
• Troshhenko V.T. Prochnost' metallov pri peremennyh nagruzkah [Strength of metals under varying loads]. Kiev, Nauk. dumka, 1978. 174 p.
• Guericke W. Eisenbahntechnische Rundschau, 2001, no. 9, pp. 541–551.
• GOST 25.502-79. Raschety i ispytanija na prochnost' v mashinostroenii. Metody mehanicheskih ispytanij metallov. Metody ispytanij na ustalost' [State Standard 25.502-79. Calculations and tests of strength in mechanical engineering. Methods of mechanical testing of metals. Test methods of fatigue]. Moscow, Izd-vo standartov, 1986. 34 p.
• GOST 1497-84. METALLY. Metody ispytanij na rastjazhenie (ISO 6892-84, ST SJeV 471-88) [State Standard 1497-84. METALS. Test methods of tensile (ISO 6892-84, ST SJeV 471-88)]. Moscow, Izd-vo standartov, 1997. 35 p.
• Gusenkov A.P. Svojstva diagramm ciklicheskogo deformirovanija pri normal'nyh temperaturah [Properties of charts cyclic deformation at normal temperatures]. Sb. st. “Soprotivlenie deformir. i razrusheniju pri malom chisle ciklov nagruzhenija” [Coll. of articles “The resistance to deformation and destruction of a small number of load cycles”]. Moscow, Nauka, 1967, pp. 34–63.
• Kogaev V.P., Mahutov N.A., Gusenkov V.P. Raschety detalej mashin i konstrukcij na prochnost' i dolgovechnost' [Calculations of machine parts and structures for strength and durability]. Moscow, Mashinostroenie, 1985. 223 p.
• Mahutov N.A. Deformacionnye kriterii razrushenija i raschet jelementov konstrukcij na prochnost' [Deformation and fracture criteria for calculation of structural elements for strength]. Moscow, Mashinostroenie, 1981. 272 p.
• Antonjuk V.E., Goman A.M., Aleksandrova V.S. Raschet naprjazhennogo sostojanija detalej tipa kolec pri sovmestnom dejstvii izgiba i kruchenija [Calculation of the stress state of pieces such as rings under the combined action of bending and torsion]. Materialy, tehnologii, instrumenty [Materials, technologies, tools], 2006, vol. 11, no. 2, pp. 32–38.
• Antonjuk V.E., Skorohodov A.S., Rudyj V.V. Metodicheskie osnovy programmnogo rascheta rezhima nagruzhenija pri dinamicheskoj stabilizacii frikcionnyh diskov [Methodical bases of calculation software loading mode with dynamic stabilization of friction discs]. Uprochnjajushhie tehnologii i pokrytija [Hardening and coating technology], 2009, no. 2, pp. 20–27.
• Antonjuk V.E. Vybor konstrukcionnyh parametrov i sovershenstvovanie tehnologii izgotovlenija frikcionnyh diskov [Selection of design parameters and improvement of manufacturing technology of friction discs]. Traktory i s.-h. mashiny [Tractors and agricultural cars], 2005, no. 7, pp. 45–47.
• Antonjuk V.E. [et al.]. Osobennosti tehnologii i oborudovanija dlja dinamicheskoj stabilizacii frikcionnyh diskov mnogodiskovyh masloohlazhdaemyh tormozov [Features of technology and equipment for dynamic stabilization of multi-plate friction discs wet brakes]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2008, no. 4(5), pp. 72–76.
• Antonjuk V.E., Berestnev O.V., Gorjachij G.Ja., Domotenko F.A., Rudyj V.V., Alekseenko A.A., Zvarygin V.I. Ustrojstvo dlja pravki kolec [Device for straightening of rings]. Patent BY, (11) 4014 U 2007.12.30 MPK (2006) V 21V 1/10 /.
• Antonjuk V.E., Domotenko F.A., Rudyj V.V., Alekseenko A.A., Zvarygin V.I. Ustrojstvo dlja pravki kolec [Device for straightening of rings]. Patent BY, (11) 5618 U 2009.10.30 MPK (2006) V 21V 1/10 /.