Smart Search 


3_2021_sen_9

Title of the article MATHEMATICAL MODELLING OF VIBRATIONS OF NON-UNIFORM RING-SHAPED ULTRASONIC WAVEGUIDES
Authors

STEPANENKO Dmitry A., D. Sc. in Eng., Assoc. Prof., Professor of the Department “Device Design and Manufacture”, Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

BUNCHUK Ksenija A., Second Category Engineer, State Unitary Innovative Enterprise “Science and Technology Park of BNTU “Polytechnic”, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICS OF DEFORMED SOLIDS
Year 2021
Issue 3(56)
Pages 90–96
Type of article RAR
Index UDK 534.131:534-8
DOI https://doi.org/10.46864/1995-0470-2021-3-56-90-96
Abstract The article describes technique for modelling of ultrasonic vibrations amplifiers, which are implemented in the form of non-uniform ring-shaped waveguides, based on application of harmonic balance method. Bending vibrations of the waveguide are described by means of non-uniform integral and differential equations equivalent to Euler–Bernoulli equations in order to simplify calculation of amplitude-frequency characteristics of vibrations, particularly, to exclude the need of working with singular matrices. Using harmonic balance method, equations of vibrations are reduced to overdetermined non-uniform linear system of algebraic equations, which least-squares solution is determined by means of pseudo-inverse matrix. On the basis of analysis of numerical example possibility of existence of variable-sign and constant-sign vibration modes of the waveguide is shown and it is determined that for realization of amplifying function it is necessary to use waveguide at constant-sign vibration mode. The constant-sign vibration modes are combinations of bending defor-mation and extensional deformation of central line of the waveguide and they are detected due to accounting extensibility of the central line in equations of vibrations. Validity of the obtained results is confirmed by comparing them to the results of modelling by means of finite element method.
Keywords ultrasound, waveguide, concentrator, functionally graded material, bending vibrations, harmonic balance method, finite element method
  You can access full text version of the article.
Bibliography
  1. Asai K., Takeuchi A. Ultrasonic wave generator. Patent US, no. 4074152, 1978.
  2. Bai F., Wang L., Yang K., He Z., Qi G., Twiefel J. Experimental investigation of peening cylindrical workpieces utilizing a transducer with ring sonotrode. Applied sciences, 2021, vol. 11, iss. 1. DOI: https://doi.org/10.3390/app11010094.
  3. Alenichev V.N., Makarov L.O., Rukhman A.A. Ultrazvukovaya kolebatelnaya sistema s promezhutochnym rezonatorom [Ultrasonic oscillatory system with an intermediate resonator]. Patent RU, no. 2106205, 1998 (in Russ.).
  4. Cardoni A. Enhancing oral implantology with power ultrasonics. IEEE transactions on ultrasonics, ferroelectrics and frequency control, 2010, vol. 57, no. 9, pp. 1936–1942.
  5. Bory M., Bauer H. Sonotrode für ein Ultraschall-Bearbeitungsgerät. Patent Application EP, no. 0594541 A2, 1994.
  6. Roney R.N. Machine component. Patent US, no. 3015961, 1962.
  7. Lugovoy I.V. Razrabotka koltsevykh kontsentratorov s peremennoy zhestkostyu dlya ultrazvukovogo proshivaniya otverstiy v khrupkikh materialakh. Aftoref. diss. kand. tekhn. nauk [Development of ring concentrators with variable stiffness for ultrasonic stitching of holes in brittle materials. Extended Abstract of Ph. D. Thesis]. Minsk, 2017. 27 p. (in Russ.).
  8. Stepanenko D.A. Raschet i proektirovanie ultrazvukovykh akusticheskikh sistem dlya ispolzovaniya v meditsine i tekhnike. Diss. dokt. tekhn. nauk [Calculation and design of ultrasonic acoustic systems for use in medicine and engineering. D. Sc. Thesis]. Minsk, 2020. 323 p. (in Russ.).
  9. Stepanenko D.A., Kunchuk K.A., Emelyanova A.S., Pleskach M.A., Solodkaya N.V. Usilitel uprugikh kolebaniy po amplitude [Amplifier of elastic vibrations in amplitude]. Patent EA, no. 035595, 2020 (in Russ.).
  10. Lang T.E. Vibration of thin circular rings. Part I. Solution for modal characteristics and forced excitation. Jet propulsion laboratory technical report, no. 32-261, 1962. 21 p.
  11. Hirashima K., Hirano K. Higher-order theories for free vibration analysis of circular rings. Proceedings of Japan Society of Civil Engineers, 1990, no. 416/I-13, pp. 201–204.
  12. Laura P.A.A. Vibrations of rings of variable cross section. Applied acoustics, 1988, vol. 25, pp. 225–234.
  13. Lee J.K., Lee B.K. In-plane free vibration of uniform circular arches made of axially functionally graded materials. International journal of structural stability and dynamics, 2019, vol. 19, no. 8. DOI: https://doi.org/10.1142/S0219455419500846.
  14. Stepanenko D.A., Emelyanova A.S., Pleskach M.A., Solodkaya N.V. Issledovanie kharakteristik sostavnykh koltsevykh kontsentratorov ultrazvukovykh kolebaniy s pomoshchyu metoda peredatochnykh matrits [Investigation of characteristics of ultrasonic vibrations’ compound annular amplifiers by means of transfer matrix method]. Electronic journal “Technical acoustics”, 2018, 2, 11 p. (in Russ.).
  15. Stepanenko D.A., Zhukov V.I., Rogovcova A.S. Raschet i proektirovanie sterzhnevykh ultrazvukovykh kontsentratorov s pomoshchyu metoda garmonichskogo balansa [Design and modeling of bar ultrasonic horns by means of harmonic balance method]. Electronic journal “Technical acoustics”, 2019, 3, 11 p. (in Russ.).
  16. Hull A.J. A modal solution for finite length rods with non-uniform area. Applied sciences, 2018, vol. 8. DOI: https://doi.org/10.3390/app8010094.
  17. Yang F., Sedaghati R., Esmailzadeh E. Free in-plane vibration of general curved beams using finite element method. Journal of sound and vibration, 2008, vol. 318, pp. 850–867.
  18. Li L. Use of Fourier series in the analysis of discontinuous periodic structures. Journal of the Optical Society of America, 1996, vol. 13, no. 9, pp. 1870–1876.
  19. Lancaster P., Tismenetsky M. The theory of matrices: with applications. San Diego, Academic Press, 1985. 570 p.
  20. Stepanenko D.A., Emelyanova A.S., Pleskach M.A., Solodkaya N.V. Optimizatsiya koltsevykh kontsentratorov ultrazvukovykh kolebaniy [Optimization of ring concentrators of ultrasonic vibrations]. Materialy 11-y mezhdunarodnoy nauchno-tekhnicheskoy konferentsii “Priborostroenie-2018” [Proc. 11th International scientific and technical conference “Instrumentation Engineering-2018”]. Minsk, 2018, pp. 328–329 (in Russ.).