Smart Search 


4_2022_sen_5

Title of the article DEVELOPMENT OF A MATHEMATICAL MODEL OF THE SYNTHESIS OF A POLYCRYSTALLINE SUPERHARD MATERIAL BASED ON CUBIC BORON NITRIDE FROM WURZITE BORON NITRIDE MODIFIED WITH ALUMINUM
Authors

SENYUT Vladimir T., Ph. D. in Eng., Leading Researcher of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

PARNITSKY Alexander M., Ph. D. in Eng., Senior Researcher of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ZHORNIK Viktor I., D. Sc. in Eng., Prof., Head of the Department of Technologies of Mechanical Engineering and Metallurgy – Head of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICAL ENGINEERING MATERIALS AND TECHNOLOGIES
Year 2022
Issue 4(61)
Pages 46–52
Type of article RAR
Index UDK 621.762:621.921.34
DOI https://doi.org/10.46864/1995-0470-2022-4-61-46-52
Abstract A mathematical model is developed for the technological process of synthesis under conditions of high pressures P and temperatures T of a polycrystalline superhard material based on cubic boron nitride (cBN). The superhard material is obtained from a wurtzite boron nitride (wBN) powder modified with aluminum Al, which is the initiator of the wBN→cBN phase transformation process. As a result of modelling, the boundary parameters Р and Т of the superhard material synthesis and the required amount of aluminum addition are calculated. It has been established that the synthesis of a material with a hardness of 28–30 GPa and crack resistance in the range of 7–10 MPa·m1/2 is carried out in the pressure range of 5–7 GPa at temperatures of 2.100–2.250 °C, and the aluminum additive content should be 7.5–10.0 wt.%.
Keywords mathematical model, cubic boron nitride, wurzite boron nitride, modification, synthesis
  You can access full text version of the article.
Bibliography
  1. Bogatyreva G.P., et al. Instrumenty iz sverkhtverdykh materialov [Tools made of superhard materials]. Moscow, Mashinostroenie Publ., 2005. 555 p. (in Russ.).
  2. Kurdyumov A.V., Pilyankevich A.N. Fazovye prevrashcheniya v uglerode i nitride bora [Phase transformations in carbon and boron nitride]. Kiev, Nauchnaya mysl Publ., 1979. 188 p. (in Russ.).
  3. Oleynik G.S. Strukturnye mekhanizmy formirovaniya keramiki na osnove vyurtsitnoy modifikatsii nitrida bora [Structural mechanisms of ceramic formation based on wurtzite modification of boron nitride].
    Sverkhtverdye materialy, 1993, no. 6, pp. 3–12 (in Russ.).
  4. Akashi T., Sawaoka A., Saito S. Effect of TiB2 and boron additions on the stability of wurtzite-type boron nitride at high temperatures and pressures. Journal of the American ceramic society, 1978, vol. 61, iss. 5–6, pp. 245–246. DOI: https://doi.org/10.1111/j.1151-2916.1978.tb09290.x.
  5. Volkogon V.M. Vliyanie sdvigovykh napryazheniy na polimorfnye prevrashcheniya v vyurtsitnom nitride bora [Effect of shear stresses on polymorphic transformations in wurtzite boron nitride]. Sverkhtverdye materialy, 2003, no. 1, pp. 22–31 (in Russ.).
  6. Volkogon V.M., et al. Osobennosti fazovykh prevrashcheniy v sisteme “BNV – almaz” v zavisimosti ot kharakteristik almaza pri ee spekanii v usloviyakh vysokikh davleniy [Features of phase transformations
    in the “BNB – diamond” system depending on the characteristics of the diamond during its sintering under high pressure conditions]. Materialy 17 Mezhdunarodnogo nauchno-tekhnicheskogo seminara “Sovremennye problemy proizvodstva i remonta v promyshlennosti i na transporte” [Proc. 17th International scientific and technical seminar “Modern problems of production and repair in industry and transport”]. Kiev, 2017, pp. 71–73 (in Russ.).
  7. Senyut V.T., Kovaleva S.A., Valkovich I.V., Mosunov E.I. Sintez PSTM iz mekhanoaktivirovannogo vyurtsitnogo nitrida bora s dobavkami nanoalmazov [Synthesis of polycrystalline superhard material from mechanically activated wurtzite boron nitride with nanodiamond additives]. Materialy 14 Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii “Novye materialy i tekhnologii: poroshkovaya metallurgiya, kompozitsionnye materialy, zashchitnye pokrytiya, svarka” [Proc. 14th International scientific and technical conference “New materials and technologies: powder metallurgy, composite materials, protective coatings, welding”]. Minsk, 2020, pp. 423–429 (in Russ.).
  8. Senyut V.T. Sintez sverkhtverdogo materiala na osnove modifitsirovannogo vyurtsitnogo nitrida bora [Synthesis of superhard material based on modified wurtzite boron nitride]. Materialy 17 Mezhdunarodnogo nauchno-tekhnicheskogo seminara “Sovremennye voprosy proizvodstva i remonta v promyshlennosti i na transporte” [Proc. 17th International scientific and technical seminar “Modern issues of production and repair in industry and transport”]. Kiev, 2019, pp. 184–188 (in Russ.).
  9. State Standard 5494-95. Pudra alyuminievaya. Tekhnicheskie usloviya [Pigmentary aluminium. Specifications]. Minsk, Standartinform Publ., 2006. 12 p. (in Russ.).
  10. State Standard 9450-76. Izmerenie mikrotverdosti vdavlivaniem almaznykh nakonechnikov [Measurements microhardness by diamond instruments indentation]. Moscow, Standartov Publ., 1996. 35 p. (in Russ.).
  11. Spiridonov A.A. Planirovanie eksperimenta pri issledovanii tekhnologicheskikh protsessov [Planning of an experiment in the study of technological processes]. Moscow, Mashinostroenie Publ., 1981. 184 p. (in Russ.).
  12. Kheifetz M.L. Matematicheskoe modelirovanie tekhnologicheskikh protsessov [Mathematical modelling of technological processes]. Novopolotsk, Polotskiy gosudarstvennyy universitet Publ., 1999. 104 p. (in Russ.).
  13. Golubev A.S., Kurdyumov A.V., Pilyankevich A.N. Nitrid bora. Struktura, svoystva, poluchenie [Boron nitride. Structure, properties, production]. Kiev, Nauchnaya mysl Publ., 1987. 200 p. (in Russ.).
  14. Klimenko S.A., et al. Finishnaya obrabotka poverkhnostey pri proizvodstve detaley [Finishing treatment of surfaces in the production of parts]. Minsk, Belorusskaya nauka Publ., 2017. 376 p. (in Russ.).