DETERMINING THE PARAMETERS OF A MULTILINEAR MATERIAL MODEL AND MODELING THE PLASTIC DEFORMATION OF BEAM STRUCTURES OF MACHINES

OMELUSIK Aleksey V., Junior Researcher of the Department of Computer Modeling and Virtual Testing of the Republican Computer Center of Mechanical Engineering, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SHMELIOV Aleksey V., Ph.D. in Eng., Director of the Republican Computer Center of Mechanical Engineering, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

KONONOV Aleksandr G., Ph. D. in Phys.-Math., Senior Researcher of the Center for Structural Research and Tribo-Mechanical Testing of Materials and Engineering Products, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

RUBCOV Aleksandr V., Head of Strength Laboratory, JSC “Minsk Automobile Plant” — Holding Management Company of “BelavtoMAZ”, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

The paper is devoted to the definition of the parameters of the multilinear model of elasto-plastic deformation of metals used in calculating the stress-strain state and predicting the destruction of mechanical-engineering structures. The proposed method for identifying the parameters of a multilinear metal model involves a transition from the conditional (engineering) values of stresses and deformations to the true values. A distinctive feature of the technique is the consideration of the stress-strain state in the neck of the sample and the recommendations for determining the intermediate parameters of the material model. For the purpose of approbation of the developed technique in the software complex ANSYS LS-DYNA, a computer simulation of flat tensile tests was carried out. In the calculation, the identified parameters of the model for steel 20 were used. The simulation error, calculated from the value of the relative elongation of the sample at the time of failure, was 1,8 %. The obtained parameters of the model were also used in modeling the three-point bending of beams of rectangular section 60×40×3 mm from steel 20. Comparison of the calculation results with experimental data showed a difference in the control values of bending forces up to 17 %. This difference is caused by hardening of the material at the corners of the cross-section of the beams. A method is proposed for taking this effect into account on the basis of recalculation of the inertial characteristics of the cross section. This made it possible to reduce the difference in the calculated results from the experimental up to 1,1 %.

computer simulation, material model, identification, mechanical characteristics, test, finite element method, LS-DYNA

• Su Hao, Wing Kam Liu, Chin Tang Chang Computer implementation of damage models by finite element and meshfree methods. Comput. Methods Appl. Mech. Engrg., 2000, vol. 187, pp. 401–440.
• Nurhadi I., Zain R., Mihradi S. Computer modeling of energy absorbing capability of bus superstructure for rollover safety. Journal of KONES Powertrain and Transport, 2011, vol. 18, no. 2, pp. 331–338.
• Nihamkin M.Sh. [et al.] Jeksperimentalnaja verifikacija modelej deformacionnogo povedenija i vysokoskorostnogo razrushenija titanovogo splava VT6 [Experimental verification of models of deformation behavior and high-speed destruction of a titanium alloy VT6]. Izvestija Samarskogo nauchnogo centra Rossijskoj akademii nauk [News of the Samara Scientific Center of the Russian Academy of Sciences], 2011, vol. 13, no. 4(4), pp. 991–997.
• Vashurin A.S. Razrabotka metodiki i ocenka passivnoj bezopasnosti kuzovov iz mnogoslojnyh panelej vahtovyh avtobusov. Diss. kand. tehn. nauk [Development of methods and assessment of passive safety of bodies from multi-layer panels of shift buses. D. Sc. Thesis]. N. Novgorod, 2014. 225 p.
• Rogov P.S. Razrabotka metodiki obespechenija passivnoj bezopasnosti kuzovov avtobusov v uslovijah oprokidyvanija pri proektirovanii. Diss. kand. tehn. nauk [Development of a technique for ensuring passive safety of coach bodies under roll-over conditions in the design. D. Sc. Thesis]. N. Novgorod, 2015. 189 p.
• Vincze-Pap S., Csiszár A. Applied virtual (VT) technology on bus superstructure roll-over tests. Proc. Int. Conf. “Design, Fabrication and Economy of Metal Structures”. Miskolc, 2013, pp. 551–560.
• Glushhenkov V.A. Uprochnenie metallov v obrabotke metallov davleniem: jelektronnoe uchebnoe posobie [Strengthening of metals in metal forming: electronic textbook]. Samara, 2010. 33 p.
• Ashraf M., Gardner L., Nethercot D.A. Strength enhancement of the corner regions of stainless steel cross-sections. Journal of Constructional Steel Research, 2005, vol. 61, no. 1, pp. 37–52.
• Sadyrin A.I. Kompjuternye modeli dinamicheskogo razrushenija konstrukcionnyh materialov: ucheb.-metod. posobie [Computer models of dynamic destruction of structural materials: teaching aid]. N. Novgorod, Nizhegorodskij gosuniversitet, 2010. 35 p.
• Forental M.V. Dinamika deformirovanija i razrushenija plastin pri vysokoskorostnom nagruzhenii udarnikom so slozhnoj strukturoj. Diss. kand. tehn. nauk [The dynamics of deformation and fracture of the plates under high loading drummer with a complex structure. D. Sc. Thesis]. Cheliabinsk, 2010. 174 p.
• Lopatina E.S., Kovaleva A.A., Anikina V.I. Mehanicheskie svojstva metallov: Konspekt lekcij [Mechanical properties of metals: Lecture notes]. Available at: http://files.lib.sfu-kras.ru/ebibl/umkd/1822/u_lectures.pdf/ (accessed 12 November 2015).
• Ostsemin A.A. K analizu naprjazhennogo sostojanija v jellipticheskoj shejke obrazca pri rastjazhenii [On the analysis of the state of stress in the elliptical neck of the sample under tension].
  Problemy prochnosti [Problems of strength], 2009, no. 4, pp. 19–28.
• New Zealand Standard of the Australia 4673. Cold-formed stainless steel structures, 2001.