Authors |
SHMIALIOU Aliaksei V., Ph. D. in Eng., Assoc. Prof., Deputy Director General for Research, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
NASKOVETS Alexander M., General Designer – Head of the Scientific and Technical Center named after A.N. Egorov, OJSC “BELAZ” — Management Company of Holding “BELAZ-HOLDING”, Zhodino, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
KHITRIKOV Sergey V., Deputy Head of the Department of Computer Modelling and Virtual Testing of the Republican Computer Center of Mechanical Engineering, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
KRAUCHONAK Aliaksandr L., Researcher of the Division Virtual Testing of the Department of Computer Modelling and Virtual Testing of the Republican Computer Center of Mechanical Engineering, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
|
Bibliography |
- Dolmatovskiy Yu.A. Osnovy konstruirovaniya avtomobilnykh kuzovov [The basics of designing car bodies]. Moscow, MAShGIZ Publ., 1962. 320 p. (in Russ.).
- Kats A.M. Avtomobilnye kuzova [Car bodies]. Moscow, Transport Publ., 1972. 117 p. (in Russ.).
- Teisseyre J. Nadwozia samochodow ciezkiego transportu. Warsaw, Komunikacji i Lacznosci, 1976.
- Vishnyakov N.N., et al. Avtomobil: osnovy konstruktsii [Car: the basics of construction]. Moscow, Mashinostroenie Publ., 1986. 304 p. (in Russ.).
- Grishkevich A.I., et al. Avtomobili: konstruktsiya, konstruirovanie i raschet. Sistemy upravleniya i khodovaya chast [Cars: construction, construction and calculation. Control systems and chassis]. Minsk, Vysshaya shkola Publ., 1987. 200 p. (in Russ.).
- Belokurov V.N., Gladkov O.V., Zakharov A.A., Melik-Sarkisyants A.S. Avtomobili-samosvaly [Dump trucks]. Moscow, Mashinostroenie Publ., 1987. 216 p. (in Russ.).
- Kudryavtsev S.M., Pachurin G.V., Solovev D.V. Kuzov sovremennogo avtomobilya [Modern car body]. Nizhniy Novgorod, 2010. 236 p. (in Russ.).
- Rodichev V.A. Gruzovye avtomobili [Trucks]. Moscow, Izdatelskiy tsentr “Akademiya” Publ., 2005. 240 p. (in Russ.).
- Akulova A.A., Stroganov Yu.N. Osnovy konstruktsii avtomobiley [Basics of car construction]. Yekaterinburg, Uralskiy universitet Publ., 2017. 168 p. (in Russ.).
- Pavlenko P.D. Vliyanie silovogo vzaimodeystviya kuzova i shassi na prochnost ramy bolshegruznogo avtomobilya-samosvala. Avtoref. diss. kand. tekhn. nauk [Effect of the force interaction of the body and chassis on the strength of the frame of a heavy-duty dump truck. Extended Abstract of Ph. D. Thesis]. Moscow, 1984. 26 p. (in Russ.).
- Bernatskiy A.K., et al. Prochnost i dolgovechnost korpusnykh detaley karernykh avtosamosvalov [Strength and durability of body parts of quarry dump trucks]. Minsk, Institut problem nadezhnosti
i dolgovechnosti mashin Publ., 1989. 53 p. (in Russ.).
- Vikhrenko D.V. Sovershenstvovanie metodov proektirovaniya nesushchikh uzlov shassi gruzovogo avtomobilya dlya povysheniya ikh prochnostnykh kharakteristik. Diss. kand. tekhn. nauk [Improvement of design methods for load-bearing components of a truck chassis to improve their strength characteristics. Ph. D. Thesis]. Minsk, 2008. 161 p. (in Russ.).
- Sibgatullin K.E. Razrabotka metodov rascheta na prochnost nesushchikh sistem gruzovykh avtomobiley s uchetom plasticheskikh deformatsiy. Avtoref. diss. kand. tekhn. nauk [Development of methods for calculating the strength of load-bearing systems of trucks taking into account plastic deformations. Extended Abstract of Ph. D. Thesis]. Naberezhnye Chelny, 2009. 20 p. (in Russ.).
- Ispenkov S.A. Modelirovanie dinamicheskoy nagruzhennosti ram karernykh samosvalov dlya otsenki i povysheniya ikh dolgovechnosti. Avtoref. diss. kand. tekhn. nauk [Modeling of dynamic loading of dump truck frames to assess and improve their durability. Extended Abstract of Ph. D. Thesis]. Minsk, 2013. 20 p. (in Russ.).
- Shmialiou A.V., Lisouski E.V., Shliazhka S.A., Litviniuk P.S., Hackevich A.S. Raschetnaya otsenka ustalostnoy dolgovechnosti nesushchikh konstruktsiy karernogo samosvala na osnove kompleksnogo kompyuternogo modelirovaniya protsessov nagruzheniya i nakopleniya povrezhdeniy [Calculated estimation of fatigue life of bearing structures of a mining dump truck based on complex computer modeling of loading and damage accumulation processes]. Mechanics of machines, mechanisms and materials, 2020, no. 1(50), pp. 33–44 (in Russ.).
- Kapusta P.P., Lebedev O.N., Didukh M.P., Shinkevich V.S., Grikhno A.A. Proektnaya otsenka konstruktsii ramy na stadii eskiznoy kompanovki chetyrekhosnogo avtomobilya-samosvala [Design evaluation of frame structure at the stage of preliminary design of a four-axle dump truck]. Mashinostroenie, 2021, iss. 33, pp. 106–127 (in Russ.).
- Loginov A.I., Afanaskin N.E. Vagony-samosvaly [Dump cars]. Moscow, Mashinostroenie Publ., 1975. 192 p. (in Russ.).
- State Standard 34764-2021. Vagony-samosvaly. Trebovaniya k prochnosti i dinamicheskim kachestvam [Dump cars. Requirements to structural straight and dynamic qualities]. Moscow, Rossiyskiy institut standartizatsii Publ., 2021. 36 p. (in Russ.).
- Mariev P.L., Egorov A.N., Moiseenko V.I., Zotov A.A., Kuleshov A.A. Karernye samosvaly osobo bolshoy gruzopodemnosti. Proektirovanie, tekhnologii, marketing [Quarry dump trucks of particularly high load capacity. Design, technology, marketing]. Minsk, Integralpoligraf Publ., 2008. 320 p. (in Russ.).
- Dubinkin D.M., Chichekin I.V., Levenkov Ya.Yu., Arutyunyan G.A. Razrabotka imitatsionnoy modeli dinamiki karernogo avtosamosvala dlya opredeleniya nagruzok, deystvuyushchikh na nesushchuyu sistemu i gruzovuyu platformu pri zagruzke i razgruzke dispersnogo gruza [Development of a simulation dump truck dynamics model to estimate loads acting on its carrier and load platform when loading and dumping bulk loads]. Russian mining industry, 2021, no. 6, pp. 117–126. DOI: https://doi.org/10.30686/1609-9192-2021-6-117-126 (in Russ.).
- Dubinkin D.M. Metodika opredeleniya nagruzok, deystvuyushchikh pri pogruzke i razgruzke gruzovoy platformy (kuzova) karernogo samosvala [Method of determining the loads acting during loading and unloading of the cargo platform (body) of quarry dump truck]. Mining equipment and electromechanics, 2022, no. 3(161), pp. 31–49. DOI: https://doi.org/10.26730/1816-4528-2022-3-31-49 (in Russ.).
- Baryshnikov Yu.N. Silovoe vzaimodeystvie uzlov avtomobilya-samosvala pri razgruzke [Force interaction of dump truck components during unloading]. Machines and plants: design and exploiting, 2015, no. 2, pp. 35–43 (in Russ.).
- Litviniuk P.S., Kiselkov A.L., Khatskevich A.S., Naskovets A.M. Issledovanie nagruzhennosti i dolgovechnosti platformy samosvala pri modelirovanii zagruzki sypuchim gruzom [Investigation of loading and durability of a dump truck platform when simulating bulk cargo loading]. Aktualnye voprosy mashinovedeniya, 2023, iss. 12, pp. 248–254 (in Russ.).
- Sankar N.B., Sramika M.L. Optimization of material usage in the fabrication of dump body. International journal of innovative technology and research, 2016, vol. 4, iss. 5, pp. 3596–3604.
- Jiang R., Ci S., Liu D., Cheng X., Pan Z. Hybrid multi-objective optimization method based on NSGA-II algorithm and entropy weighted TOPSIS for lightweight design of dump truck carriage. Machines, 2021, vol. 9, iss. 8. DOI: https://doi.org/10.3390/machines9080156.
- Dubinkin D.M., Yalyshev A.V., Ismailova Sh.Ya. Tendentsii razvitiya gruzovykh platform karernykh samosvalov [Trends in the development of unmanned mining dump trucks]. Russian mining industry, 2023, no. 3, pp. 72–76. DOI: https://doi.org/10.30686/1609-9192-2023-3-72-76 (in Russ.).
- Austin’s lightest-ever truck tray launched. Available at: https://www.austineng.com/austins-lightest-ever-truck-tray-launched/ (accessed August 20, 2024).
- New ultraclass Duratray SDB models designed and commissioned for CATERPILLAR 796AC mining trucks. 2023. Available at: https://www.duratray.com/post/new-ultraclass-duratraysdb- models-designed-and-commissioned-for-cat-796ac-trucks (accessed August 20, 2024).
- Schlam launches Hercules EXO dump body. Available at: https://www.trucksales.com.au/editorial/details/schlam-launches- hercules-exo-dump-body-134140 (accessed August 20, 2024).
- Austin’s high-performance truck tray (HPT) at cutting-edge of design and engineering. 2023. Available at: https://www.austineng.com/austins-high-performance- truck-tray-hpt-at-cuttingedge-of-design-and-engineering/ (accessed August 20, 2024).
- First Central Europe deliveries of Metso Truck Bodies. 2020. Available at: https://www.aggbusiness.com/ab1/news/first-central- europe-deliveries-metso-truck-bodies (accessed August 20, 2024).
- Hercules open cut dump bodies. Available at: https://schlam.com/payload-apac/hercules-open-cut-dump-bodies/ (accessed August 20, 2024).
- Body upgrade for haul trucks. 2020. Available at: https://www.austineng.com/body-upgrade-for-haul-trucks/ (accessed August 20, 2024).
- DT HiLoad industrial equipment. Available at: https://www.simuserv.de/fileadmin/user_upload/downloads/Branchen/ T_M/3DS_2015_CS_Tray_Optimisation_DTHiLoad_CF.pdf (accessed August 20, 2024).
- How to analyze the structural strength of dump truck body during loading and unloading using EDEM +OS one-way coupling. Available at: https://community.altair.com/discussion/ 39642/how-to-analyze-the-structural-strength-of-dumptruck- body-during-loading-and-unloading-using-edem-os-oneway-coupling (accessed August 20, 2024).
- Shmialiou A.V. Sovershenstvovanie metodov skhematizatsii sluchaynykh protsessov nagruzheniya i rascheta ustalostnoy dolgovechnosti nesushchikh konstruktsiy gruzovykh avtomobiley. Avtoref. diss. kand. tekhn. nauk [Improvement of methods for schematization of random loading processes and calculation of fatigue life of load-bearing structures of trucks. Extended Abstract of Ph. D. Thesis]. Minsk, 2010. 20 p. (in Russ.).
- Jono M. Fatigue damage and crack growth under variable amplitude loading with reference to the counting methods of stress-strain ranges. International journal of fatigue, 2005, vol. 27, iss. 8, pp. 1006–1015. DOI: https://doi.org/10.1016/j.ijfatigue.2004.09.011.
|