Title of the article

COMPLIANCE ASSESSMENT OF THE SUPERSTRUCTURE OF BUSES IN ACCORDANCE WITH THE REQUIREMENTS OF REGULATION NO. 66 ON THE BASIS OF COMPUTER SIMULATION OF TESTS

Authors

AMIALIUSIK Aliaksei V., Junior Researcher of the Department of Computer Modeling and Virtual Testing of the Republican Computer Center of Mechanical Engineering, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SHMIALIOU Aliaksei V., Ph. D. in Eng., Deputy Director General for Research, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MECHANICS OF MOBILE MACHINES
Year 2020 Issue 2 Pages 5–15
Type of article RAR Index UDK 620.3 Index BBK  
Abstract The existing approaches of domestic and foreign researchers in the field of simulation of the loading of bus frames with the calculation evaluation of the superstructure are considered for compliance with the requirements of passive safety during rollover. The criteria and the main ways to improve the quality of computer models and to reduce the duration of calculations are determined. The fundamentals of the methodology for computer simulation of bus tests are presented and described for compliance with the requirements of Regulation No. 66. Revision 1 — Amendment 2. Uniform technical prescriptions concerning the approval of large passenger vehicles with regard to the strength of their superstructure (hereinafter — Regulation No. 66). An example of computer simulation of testing the superstructure of a suburban bus during rollover is given using the ANSYS LS-DYNA finite element analysis software system. Preparation of the model is performed using the LS-PrePost program.
Keywords

superstructure, bus, passive safety, computer model, finite element analysis, tilting angle, tilting platform, moment of inertia, initial angular velocity, potential impact energy, Regulation No. 66

  You can access full text version of the article.
Bibliography
  1. UNECE Regulation No. 66(02). Peresmotr 1. Edinoobraznye predpisaniya, kasayushchiesya ofitsialnogo utverzhdeniya krupnogabaritnykh passazhirskikh transportnykh sredstv v otnoshenii prochnosti ikh silovoy struktury [Revision 1. Uniform provisions concerning the approval of large passenger vehicles with regard to the strength of their superstructure]. Minsk, Gosstandart Publ., Belorusskiy gosudarstvennyy institut standartizatsii i sertifikatsii Publ., 2006. 74 p.
  2. Kompyuternoe modelirovanie oprokidyvaniya avtobusa v sootvetstvii s trebovaniyami Pravil EEK OON No. 66 [Computer simulation of bus roll-over in accordance with the requirements of the UNECE Regulation No. 66]. Moscow, 2014. 14 p. Available at: http://lsdyna.ru/video/bus-capsizing/cruise.pdf (accessed 08 October 2015).
  3. Rogov P.S. Razrabotka metodiki obespecheniya passivnoy bezopasnosti kuzovov avtobusov v usloviyakh oprokidyvaniya pri proektirovanii. Diss. kand. tekhn. nauk [Development of a technique for ensuring passive safety of coach bodies under roll-over conditions in the design. Ph.D. Thesis]. Nizhny Novgorod, 2015. 189 p.
  4. Orlov L.N., Rogov P.S., Vashurin A.S., Tumasov A.V., Feokistov N.F. Otsenka nesushchey sposobnosti karkasa kuzova avtobusa po rezultatam kompyuternogo modelirovaniya [The estimation of bus structure bearing capacity on basis of simulation results the results of computer simulation]. Trudy NGTU im. R.E. Alekseeva [Transactions of Nizhni Novgorod State Technical University n.a. R.Y. Alexeev], 2012, no. 3(96), pp. 150–156.
  5. Orlov L.N., Tumasov A.V., Rogov P.S., Vashurin A.S. Otsenka passivnoy bezopasnosti avtobusa po rezultatam kompyuternogo modelirovaniya [Bus passive safety estimation by the results of computer simulation]. Sovremennye problemy nauki i obrazovaniya [Modern problems of science and education], 2013, no. 3. Available at: http://www.science-education.ru/109-9423.
  6. Rogov P.S., Orlov L.N., Zelenov M.Y., Shabrov R.N. Vliyanie osobennostey protsessa oprokidyvaniya avtobusa na deformatsii kuzova [Influence of the features of the bus rollover process on the body structure deformations]. Sovremennye problemy nauki i obrazovaniya [Modern problems of science and education], 2013, no. 6. Available at: www.science-education.ru/113-11603 (accessed 08 October 2015).
  7. Gugliotta A., Vadori R., Montanini R., Bertorelli N. Structural crash analysis with ADAMS: a comparison between multibody and FEM approaches. Proc. 12th European ADAMS Users Conference. Paris, 1997.
  8. Pankaj S.D. Rollover and roof crush analysis of low-floor mass transit bus. M.Sc. Thesis. Wichita, KS, 2006. 104 p.
  9. Elitok K., Guler M.A., Bayram B., Stelzmann U. An Investigation on the Roll-Over Crashworthiness of an Intercity Coach, Influence of Seat Structure and Passenger Weight. Proc. 9th International LS-DYNA Conference. Dearborn, MI, 2006, pp. 17–30.
  10. Pavlata P. Virtual Simulations of Bus Approval Tests according to European Standards. Proc. MSC.Software 2005 Virtual Product Development Conference. 2005.
  11. ECBOS – Enhance Coach and Bus Occupant Safety. Madrid, 1999. 66 p. Available at: https://ec.europa.eu/transport/road_safety/sites/roadsafety/files/pdf/projects_sources/ecbos_final_report.pdf (accessed 02 December 2016).
  12. Park S.J., Yoo W.S., Kwon Y.J. Rollover Analysis of a Bus Using Beam and Nonlinear Spring Elements. Proc. 9th WSEAS International Conference on Applied Mathematics. Istanbul, 2006, pp. 128–133.
  13. Kaptanoğlu M., Kucuk O. Rollover crashworthiness of a multipurpose coach. Proc. 7. Otomotiv Teknolojileri Kongresi, OTEKON 2014. Bursa, 2014, p. 48.
  14. Omelusik A.V., Shmeliov A.V., Kononov A.G., Rubcov A.V. Opredelenie parametrov polilineynoy modeli materiala i modelirovanie plasticheskogo deformirovaniya balochnykh konstruktsiy mashin [Determining the parameters of a multilinear material model and modeling the plastic deformation of beam structures of machines]. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and materials], 2017, no. 2(39), pp. 19–27.
  15. John O.H. LS-DYNA THEORY MANUAL. Livermore, Livermore Software Technology Corporation, 2006. 680 p. Available at: http://www.lstc.com/pdf/ls-dyna_theory_manual_2006.pdf (accessed 10 August 2018).

 
MECHANICS OF MOBILE MACHINES
Amialiusik A.V., Shmialiou A.V.
Compliance assessment of the superstructure of buses in accordance with the requirements of Regulation No. 66 on the basis of computer simulation of tests
5
Krasnevskiy L.G.
Automatic transmissions: analysis and prospects for use in hybrid and battery electric vehicles. Part 1
16
DYNAMICS, DURABILITY OF VEHICLES AND STRUCTURES
Surin V.M.
Fatigue damage to products during testing by the method of the sweep frequency
30
Ishin N.N., Goman A.M., Skorokhodov A.S., Dakalo Yu.A.
Method for calculating the parameters of shock pulses in bearings with local damages to raceways
37
TECHNOLOGICAL MECHANICS
Kiselev M.G., Moskalenko A.V., Bogdan P.S., Monich S.G., Anschitc A.A.
Technological indicators of the operation of cutting blanks from sheet material with a wire tool with a modified surface by electroerosion method
46
Domasevich V.V., Kulgeyko M.P.
To the issue of the formation of the surface topography during diamond smoothing
55
MATERIALS SCIENCE IN MECHANICAL ENGINEERING
Shipitsyn S.Ya., Zhornik V.I., Isaeva L.E., Kucherenko P.N., Lihovey D.I.
Metal science aspects of the influence of dispersion nitride hardening on the structureof hypoeutectoid and eutectoid carbon steels
63
BIOMECHANICS
Korzun A.A., Kukareko V.A., Shmialiou А.V., Sitnik A.А., Bondarev O.N., Linov A.L.
Implant for fixing trochanteric fractures of the femur
74
Bosiakov S.M., Nikolaitchik M.A., Matveev A.L., Minasov T.B.
Assessmentof ultimate load on human femur with telescopic or isoelastic implantin proximal part
83
Veselukha V.M., Bogdanovich A.V.
On the method of experimental evaluation of model parameters for predicting the characteristics of pipe material crack resistance, taking into account the influence of corrosion-erosion processes
87
Audzeichyk Ya.V., Konon P.N., Mogilevskiy E.I.
Analytical and numerical research of the forms of equilibrium of a liquid limited volume on a rotating horizontal base
91