Title of the article RATIONAL FOR REHEATING IN THE AUTOMATED LINE FOR RING BLANKS PRODUCTION
Authors

ANTONYUK Vladimir E., D. Sc. in Eng., Chief Researcher of the Laboratory of Metallurgy in Mechanical Engineering, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

NIKIFOROVICH Sergey O., Director General, OJSC “BELAZ” — Management Company of Holding “BELAZ-HOLDING”, Zhodino, Republic of Belarus

RUDII Victor V., Ph. D. in Eng., Chief Technologist, OJSC “BELAZ” — Management Company of Holding “BELAZ-HOLDING”, Zhodino, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MECHANICAL ENGINEERING MATERIALS AND TECHNOLOGIES
Year 2021
Issue 3(56)
Pages 61–69
Type of article RAR
Index UDK 621.7
DOI https://doi.org/10.46864/1995-0470-2021-3-56-61-69
Abstract Features and requirements to the use of reheating of ring blanks in the conditions of production on the automated line are considered. An assessment is given for a technological temperature state of ring blanks at various stages of production under conditions of the automated line. For assessment of rational for reheating at production of ring blanks, a classification of ring manufacturing technology is proposed with the production of a pressed non-core blank in an open die, with the production of a pressed profile blank in a closed die, with the production of a pressed profile blank in a stamp with reverse extrusion. The technology of ring rolling with the production of a pressed non-core blank in an open die is the most economical and does not require the use of reheating in the manufacture of rings made of medium-alloy steels. The technology of ring rolling of a profile blank obtained in a closed die does not require the use of additional heating after pressing, in the case of manufacturing rings with a simplified profile on the outer or inner diameters of the ring. In the manufacture of rings with a more complex profile on the outer and inner diameters of the ring, as well as rings made of high-alloy steels, the final decision on the need for additional heating is made depending on the temperature of the end of intensive plastic deformation for the selected steel grade of the ring. The technology of ring rolling with the production of a pressed profile blank in a die with reverse extrusion requires the use of reheating after the pressing operation before the ring rolling operation, and is recommended for the manufacture of rings from medium- and high-alloy steels with a complex profile section on the outer and inner diameters, wall thicknesses, with a ratio of wall thickness to outer diameter D within h / D = 0.011...0.016 and with a ratio of wall thickness to ring height L within h / L = 0.020...0.041. The proposed recommendations are intended for use in the development of technological support for the operation of the automated ring-rolling complex at OJSC “BELAZ”.
Keywords ring blank, heating, press forming, rolling, modeling, plastic deformation
  You can access full text version of the article.
Bibliography
  1. Parkhomchik P.A., Rudii V.V., Antonyuk V.E. Osobennosti koltseraskatki v usloviyakh melkoseriynogo proizvodstva profilnykh kolets [Features of ring rolling in the conditions of small-lot production of profile rings.]. Foundry production and metallurgy, 2013, no. 3(71), pp. 92–98 (in Russ.).
  2. Parkhomchik P.A., Rudii V.V., Antonyuk V.E., Shipko A.A. Osobennosti ispolzovaniya koltseraskatnogo kompleksa v proizvodstve detaley OAO “BelAZ” [Features of the ring-rolling complex use in the production of parts of OJSC “BELAZ”]. Aktualnye voprosy mashinovedeniya, 2012, iss. 1, pp. 354–357 (in Russ.).
  3. Antonyuk V.E., Vityaz P.A., Parkhomchik P.A., Rudii V.V., Shipko A.A. Koltseraskatka v proizvodstve detaley mashinostroeniya [Ring rolling in the production of mechanical engineering parts]. Minsk, Belorusskaya nauka Publ., 2013. 188 p. (in Russ.).
  4. Kovka i shtampovka. T. 1. Materialy i nagrev. Oborudovanie. Kovka [Forging and stamping. Vol. 1. Materials and heating. Equipment. Forging]. Moscow, Mashinostroenie Publ., 1985. 568 p. (in Russ.).
  5. SMS Meer-Ringwalzanlage bei Ovako Tube & Ring erfolgreich in Betrieb genommen. Available at: https://www.pressebox. de/inaktiv/sms-siemag-ag/SMS-Meer-Ringwalzanlagebei- Ovako-Tube-Ring-erfolgreich-in-Betrieb-genommen/ boxid/400959/ (accessed 22 April 2021).
  6. Kluge A., Faber H. Glühende Ringe – Das Ringwalzen als wichtiges Verfahren der Massivumformung. MM Industrie Magasin, 2005, pp. 26–31.
  7. Parkhomchik P.A., Rudyi V.V., Antonyuk V.E., Shipko A.A. Osobennosti ispolzovaniya koltseraskatnogo kompleksa v proizvodstve detaley [Use pattern of annular collars rolling complex in details manufacture of “BElAZ” Ltd]. Aktualnye voprosy mashinovedeniya, 2012, iss. 1, pp. 354–357 (in Russ.).
  8. Antonyuk V.E., Parkhomchik P.A., Rudii V.V. Koltseraskatka v usloviyakh avtomatizirovannogo proizvodstva [Ring rolling in the conditions of automated production]. Minsk, Belorusskaya nauka Publ., 2021. 245 p. (in Russ.).
  9. Gulyaev A.P., Gulyaev A.A. Metallovedenie [Metal science]. Moscow, Alyans Publ., 2011. 643 p. (in Russ.).
  10. Arzamasov B.N., et al. Materialovedenie [Materials science]. Moscow, Moskovskiy gosudarstvennyy tekhnicheskiy universitet im. N.E. Baumana Publ., 2008. 648 p. (in Russ.).