1_2023_sen_2

Title of the article FEATURES OF STABILIZATION OF RING BLANKS
Authors

ANTONYUK Vladimir E., D. Sc. in Eng., Assoc. Prof., Chief Researcher of the Laboratory of Metallurgy in Mechanical Engineering of the R&D Center “Mechanical Engineering Technologies and Processing Equipment”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

NIKIFOROVICH Sergey O., Director General, OJSC “BELAZ” — Management Company of Holding “BELAZ-HOLDING”, Zhodino, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section DYNAMICS, DURABILITY OF VEHICLES AND STRUCTURES
Year 2023
Issue 1(62)
Pages 11–17
Type of article RAR
Index UDK 621.7
DOI https://doi.org/10.46864/1995-0470-2023-1-62-11-17
Abstract Ring blanks are in demand in various branches of mechanical engineering in the production of large-sized bearings, turbine disks, special gears and other critical products. Besides high requirements to the ring blanks in terms of geometric dimensional accuracy, material structure and mechanical properties, in some cases the most important requirement is their production with absence of residual stresses and high stability of geometric shape. Specific features of ring rolling may lead to the occurrence of residual stresses, the magnitude of which is impossible to determine by the known methods of defect control. The paper analyzes the causes of shape error and residual stresses in the production of ring blanks in the process of ring rolling and heat treatment. The article also assesses the possibility of using different methods of shape stabilization and reduction of residual stresses in the manufacture of ring blanks for critical engineering products: expandable, thermal, thermomechanical, vibratory and ultrasonic treatment. For ring blanks designed for manufacturing critical parts, it is suggested to use shape stabilization and residual stresses reduction by means of cyclic loading after ring rolling and thermal treatment. The design scheme and force parameters of a device for stabilizing ring blanks on the basis of a double-acting lever-hinge mechanism are determined. The ring-rolling complex created at the Belarusian Automobile Plant will have potential opportunities to produce ring blanks for manufacturing of critical products in transport machine-building, aviation, space, defense and chemical industries of the Russian Federation. The results of the analysis of the methods for shape stabilization and reduction of residual stresses of ring blanks are planned to be used in the creation of this complex.
Keywords ring blank, ring, stabilization, residual stresses, cyclic loading, ring rolling, heat treatment
  You can access full text version of the article.
Bibliography
  1. Hülshorst T. Erhöhung der Prozessstabilität beim Ringwalzen durch adaptive Regelung der Ringlage. Verlag Shaker, 2004. 164 р.
  2. Kneißler А. Multisensor-Strategie zur Optimierung des Anwalzverhaltens beim Radial-Axial-Ringwalzen. Verlag Shaker, 2009. 162 р.
  3. Khenkin M.L., Lokshin I.Kh. Razmernaya stabilnost metallov i splavov v tochnom mashinostroenii i priborostroenii [Dimensional stability of metals and alloys in precision engineering and instrument making]. Moscow, Mashinostroenie Publ., 1974. 256 p. (in Russ.).
  4. OST 4G 0.054.103-74. Detali priborov vysokotochnye metallicheskie. Stabilizatsiya razmerov termicheskoy obrabotkoy. Tipovye tekhnologicheskie protsessy [High-precision metal parts of devices. Dimensional stabilization by heat treatment. Typical technological processes]. 1976. 74 р. (in Russ.).
  5. Pastukhova Zh.P., Rakhshtadt A.G., Kaplun Yu.A. Dinamicheskoe starenie splavov [Dynamic aging of alloys]. Moscow, Metallurgiya Publ., 1985. 223 р. (in Russ.).
  6. Babenko M.G. Sovershenstvovanie tekhnologii obespecheniya razmernoy tochnosti pretsizionnykh detaley tipa kolets podshipnikov na osnove ultrazvukovoy stabilizatsii vnutrennikh napryazheniy. Avtoref. diss. kand. tekhn. nauk [Improving the technology for ensuring the dimensional accuracy of precision parts such as bearing rings based on ultrasonic stabilization of internal stresses. Extended Abstract of Ph. D. Thesis]. Saratov, 2002. 147 p. (in Russ.).
  7. Slesarev S.V. Sovershenstvovanie tekhnologii stabilizatssii ostatochnykh napryazheniy v pretsizionnykh detalyakh tipa kolets podshipnikov na osnove primeneniya ultrazvukovoy energii. Avtoref. diss. kand. tekhn. nauk [Improving the technology of stabilizing residual stresses in precision parts such as bearing rings based on the use of ultrasonic energy. Extended Abstract of Ph. D. Thesis]. Saratov, 2006. 174 p. (in Russ.).
  8. Ragulskis K.M., Stulpinas B.B., Tolutis K.B. Vibratsionnoe starenie [Vibration aging]. Saint Petersburg, Mashinostroenie Publ., 1987. 72 p. (in Russ.).
  9. Lashchenko G.K., Demchenko Yu.V. Energosberegayushchie tekhnologii poslesvarochnoy obrabotki metallokonstruktsiy [Energy-saving technologies for post-welding processing of metal structures]. Kiev, Ekotekhnologiya Publ., 2008. 168 p. (in Russ.).
  10. Letunovskiy A.P., Antonov A.A., Steklov O.I. Snyatie tekhnologicheskikh ostatochnykh napryazheniy v metallokonstruktsiyakh nizkochastotnoy vibroobrabotkoy [Removal of residual stresses by low-frequency vibration treatment]. Blanking productions in mechanical engineering, 2012, no. 8, pp. 19–23 (in Russ.).
  11. Kreknin L.T. Proizvodstvo avtomaticheskogo oruzhiya. Chast 1. Proizvodstvo stvolov [Manufacture of automatic weapons. Part 1. Barrel production]. Izhevsk, 1998. 238 p. (in Russ.).
  12. Barakhtenko E.A. Minimizatsiya povodok tonkostennykh aviatsionnykh detaley na osnove diskretnogo modelirovaniya. Avtoref. diss. kand. tekhn. nauk [Minimization of the distortion of thin-walled aircraft parts based on discrete modeling. Extended Abstract of Ph. D. Thesis]. Irkutsk, 2010. 178 p. (in Russ.).
  13. Ovseenko E.S. Obespechenie kachestva izgotovleniya malozhestkikh detaley tipa diskov gazoturbinnykh ustanovok za schet snizheniya tekhnologicheskikh ostatochnykh deformatsiy. Avtoref. diss. kand. tekhn. nauk. [Ensuring the quality of manufacturing of low-rigid parts such as disks of gas turbine units by reducing technological residual deformations. Extended Abstract of Ph. D. Thesis]. Moscow, 2011. 144 p. (in Russ.).
  14. Antonyuk V.E. Dinamicheskaya stabilizatsiya v proizvodstve malozhestkikh detaley [Dynamic stabilization in the production of low-rigid parts]. Minsk, Belorusskaya nauka Publ., 2017. 190 p. (in Russ.).
  15. Antonyuk V.E., Yavorskiy V.V. Razrabotka klassifikatora kolets pri ispolzovanii protsessa koltseraskatki [Development of a ring classifier when using the ring rolling process]. Vestnik Brestskogo gosudarstvennogo tekhnicheskogo universiteta. Mashinostroenie, 2019, no. 4(117), pp. 42–45 (in Russ.).
  16. Antonyuk V.E. Sandomirski S.G. Dinamicheskaya stabilizatsiya malozhestkikh kolets posle koltseraskatki [Dynamic stabilization of rings of low rigidity after the ring-rolling]. Mechanics of machines, mechanisms and materials, 2020, no. 3(52), pp. 34–41 (in Russ.).