3_2023_sen_3

Title of the article MODELING OF THERMOELASTIC-VISCOPLASTIC DYNAMIC DEFORMATION OF FLEXIBLE CYLINDRICAL REINFORCED SHELLS
Authors

YANKOVSKII Andrei P., D. Sc. in Phys. and Math., Leading Researcher of the Laboratory of Physics of High-Speed Processes, Khristianovich Institute of Theoretical and Applied Mechanics of the Siberian Branch of the Russian Academy of Science, Novosibirsk, Russian Federation, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICS OF DEFORMED SOLIDS
Year 2023
Issue 3(64)
Pages 25–36
Type of article RAR
Index UDK 539.4
DOI https://doi.org/10.46864/1995-0470-2023-3-64-25-36
Abstract A mathematical model of thermoelastic-viscoplastic flexural dynamic deformation of thin circular cylindrical shells with complex reinforcement structures is developed. Weak resistance to transverse shear and wave processes in such composite structures are modeled in the framework of Ambartsumyan’s non-classical theory of bending. The geometric nonlinearity of the problem is taken into account in the Karman approximation. The composition materials are isotropic; their plastic deformation is described by the relations of the flow theory with a loading function that depends on temperature and strain rate. The connection between the thermal and mechanical components of the problem under consideration is taken into account. In the transverse direction of structures, the temperature is approximated by a 7th order polynomial. The formulated nonlinear two-dimensional initial-boundary value problem is numerically integrated using an explicit scheme of time steps. The elastic-viscoplastic and elastic-plastic dynamic behavior of fiberglass and metal-composite long cylindrical shells, which are orthogonally reinforced in the circumferential and longitudinal directions, is studied. Structures are loaded from the inside with pressure, which is similar to the pressure in an air blast wave. It is shown that flexible fiberglass shells during axisymmetric deformation can experience additional heating by 11…13 °C at certain points. Metal-composite structures similar in geometry and reinforcement structure — by 40…60 °C. Thermo-elastoplastic calculations lead to an overestimation of the maximum temperature values in fiberglass shells by 1.0…1.5 °C compared to thermoelastic-viscoplastic calculations, and for metal-composite structures, on the contrary, to an underestimation of these values by 20 °C. It is shown that the calculations of fiberglass shells can be carried out without taking into account the thermal response in them, and it is advisable to calculate the dynamics of metal-composite shells, taking into account the temperature response in them. The dynamic behavior of both metal-composite and fiberglass structures must be calculated taking into account the sensitivity of the plastic properties of their composition components to the strain rate.
Keywords flexible cylindrical shells, complex reinforcement, dynamic loading, coupled thermoelasticviscoplasticity, Ambartsumyan’s bending theory, explicit numerical scheme
  You can access full text version of the article.
Bibliography
  1. Abrosimov N.A., Bazhenov V.G. Nelineynye zadachi dinamiki kompozitnykh konstruktsiy [Nonlinear problems of dynamics composites designs]. Nizhny Novgorod, Nizhegorodskiy gosudarstvennyy universitet im. N.I. Lobachevskogo Publ., 2002. 400 p. (in Russ.).
  2. Reddy J.N. Mechanics of laminated composite plates and shells: Theory and analysis. Boca Raton, CRC Press, 2004. 831 p.
  3. Pikul V.V. Mekhanika obolochek [Mechanics of shells]. Vladivostok, Dalnauka Publ., 2009. 536 p. (in Russ.).
  4. Leu S.-Y., Hsu H.-C. Exact solutions for plastic responses of orthotropic strain-hardening rotating hollow cylinders. International journal of mechanical sciences, 2010, vol. 52, iss. 12, pp. 1579–1587. DOI: https://doi.org/10.1016/j.ijmecsci.2010.07.006.
  5. Kazanci Z. Dynamic response of composite sandwich plates subjected to time-dependent pressure pulses. International journal of non-linear mechanics, 2011, vol. 46, iss. 5, pp. 807–817. DOI: https://doi.org/10.1016/j.ijnonlinmec.2011.03.011.
  6. Andreev A.N. Uprugost i termouprugost sloistykh kompozitnykh obolochek. Matematicheskaya model i nekotorye aspekty chislennogo analiza [Elasticity and thermo-elasticity layered composite shells. Mathematical model and some aspects of the numerical analysis]. Saarbrucken, Palmarium Academic Publishing, 2013. 93 p. (in Russ.).
  7. Solomonov Yu.S., Georgievskiy V.P., Nedbay A.Ya., Andryushin V.A. Prikladnye zadachi mekhaniki kompozitnykh tsilindricheskikh obolochek [Applied problems of mechanics of composite cylindrical shells]. Moscow, Fizmatlit Publ., 2014. 408 p. (in Russ.).
  8. Yankovskii A.P. Modelirovanie osesimmetrichnogo uprugoplasticheskogo deformirovaniya tsilindricheskikh voloknistykh obolochek [Modeling of axisymmetric elastoplastic deformation of cylindrical fibrous shells]. Mechanics of machines, mechanisms and materials, 2018, no. 2(43), pp. 68–76 (in Russ.).
  9. Yankovskii A.P. Modelirovanie uprugoplasticheskogo povedeniya gibkikh tsilindricheskikh obolochek s prostranstvennymi strukturami armirovaniya [Modeling of elastic-plastic behavior of flexible cylindrical shells with spatial reinforcement structures]. Composite materials constructions, 2019, no. 2, pp. 9–21 (in Russ.).
  10. Dimitrienko Yu.I. Mekhanika kompozitnykh konstruktsiy pri vysokikh temperaturakh [Mechanics of composite structures at high temperatures]. Moscow, Fizmatlit Publ., 2019. 448 p. (in Russ.).
  11. Composites: State of art. New York, AIME, 1974. 365 p.
  12. Kompozitsionnye materialy [Composite materials]. Kiev, Nauchnaya mysl Publ., 1985. 592 p. (in Russ.).
  13. Handbook of composites. New York, Van Nostrand Reinhold Company Inc., 1982. 786 p.
  14. Vena P., Gastaldi D., Contro R. Determination of the effective elastic-plastic response of metal-ceramic composites. International journal of plasticity, 2008, vol. 24, iss. 3, pp. 483–508. DOI: https://doi.org/10.1016/j.ijplas.2007.07.001.
  15. Brassart L., Stainier L., Doghri I., Delannay L. Homogenization of elasto-(visco) plastic composites based on an incremental variational principle. International journal of plasticity, 2012, vol. 36, pp. 86–112. DOI: https://doi.org/10.1016/j.ijplas.2012.03.010.
  16. Akhundov V.M. Inkrementalnaya karkasnaya teoriya sred voloknistogo stroeniya pri bolshikh uprugikh i plasticheskikh deformatsiyakh [Incremental carcass theory of fibrous media under large elastic and plastic deformations]. Mekhanika kompozitnykh materialov, 2015, vol. 51, no. 3, pp. 539–558 (in Russ.).
  17. Yankovskii A.P. Modelirovanie termouprugovyazkoplasticheskogo deformirovaniya gibkikh armirovannykh plastin [Modeling of thermo-elastic-visco-plastic deformation of flexible reinforced plates]. Prikladnaya matematika i mekhanika, 2022, vol. 86, no. 1, pp. 121–150 (in Russ.).
  18. Bezukhov N.I., Bazhanov V.L., Goldenblat I.I., Nikolaenko N.A., Sinyukov A.M. Raschety na prochnost, ustoychivost i kolebaniya v usloviyakh vysokikh temperatur [Calculations on strength, stability and fluctuations in conditions of high temperatures]. Moscow, Mashinostroenie Publ., 1965. 567 p. (in Russ.).
  19. Encyclopedia of physics. Vol. VIa/1. Mechanics of solids I. Berlin, Heidelberg, New York, Springer-Verlag, 1973.
  20. Reissner E. On transverse vibrations of thin shallow elastic shells. Quarterly of applied mathematics, 1955, vol. 13, no. 2, pp. 169–176. DOI: https://doi.org/10.1090/qam/69715.
  21. Bogdanovich A.E. Nelineynye zadachi dinamiki tsilindricheskikh kompozitnykh obolochek [Nonlinear problems of the dynamics of cylindrical composite shells]. Riga, Zinatne Publ., 1987. 295 p. (in Russ.).
  22. Ambartsumyan S.A. Obshchaya teoriya anizotropnykh obolochek [The general theory of anisotropic shells]. Moscow, Nauka Publ., 1974. 446 p. (in Russ.).
  23. Vasiliev V.V., Morozov E. Advanced mechanics of composite materials and structural elements. Amsterdam, Elsever, 2013. 412 p.
  24. Houlston R., DesRochers C.G. Nonlinear structural response of ship panels subjected to air blast loading. Computers& structures, 1987, vol. 26, no. 1–2, pp. 1–15. DOI: https://doi.org/10.1016/0045-949(87)90232-X.
  25. Lukanin V.N., Shatrov M.G., Kamfer G.M., Nechaev S.G., Ivanov I.E., Matyukhin L.M., Morozov K.A. Teplotekhnika [Heat engineering]. Moscow, Vysshaya shkola Publ., 2003. 671 p. (in Russ.).