Title of the article

MECHANICS AND MATHEMATICAL MODELS FOR BEHAVIOR OF THE DEFORMABLE SOLID AND ELASTIC MEDIUMS WITH REGARD TO THEIR INTERNAL STRUCTURE

Authors

Zhuravkov M.A., Doctor of Physical and Mathematical Sciences, Professor, Pro-rector of Research of the Belarusian State University, Head of the Department of Theoretical and Applied Mechanics, Mechanics and Mathematics Faculty, Belarusian State University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
Makaeva T.A., Postgraduate Student, Department of Theoretical and Applied Mechanics, Belarusian State University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MECHANICS OF DEFORMED SOLIDS
Year 2012 Issue 1 Pages 29-38
Type of article RAR Index UDK 539.3; 622.833 Index BBK  
Abstract

The article shows the possible ways of building mechanical and mathematical models of the behavior of deformable solid and elastic mediums with regard to their internal structure. The constructions are made in the framework of continuum mechanics to static problems of deformation of elastic bodies. The considerable factor in this is that the internal structure of the accounting environment does not allow a physical equations describing the behavior of the environment (the connection between the components of the stress-strain state), using Hooke's law in standard form. The model was developed for three-dimensional case which proposed in [4] for two-dimensional case, describing the stress-strain state of rock massifs of the block structure. The results performed on the basis of the proposed model, the numerical analysis of the stress-strain state of the model structure (plate) and then comparing the results with the behavior of structures whose state is described by the classical Hooke's elastic model.

Keywords

block structure, deformation model , microstructure, VAT, continuity array, slip lines

  You can access full text version of the article
Bibliography
  • Zhuravkov M.A. Matematicheskoe modelirovanie deformacionnyh processov v tverdyh deformiruemyh sredah (na primere zadach mehaniki gornyh porod i massivov) [Mathematical modeling of deformation processes in solid deformable medium (on the example of problems in mechanics of rocks and arrays)]. Minsk, BGU, 2002. 456 p.
  • Zhuravkov M.A. [et al.]. Komp'juternoe modelirovanie v geomehanike [Computer modeling in geomechanics]. Minsk, BGU, 2008. 443 p.
  • Pleskachevskyi Ju.M., Shilko S.V. Auksetiki: modeli i prilozhenija [Auksetiki: models and applications]. Vesti NANB [News of the NAS of Belarus], 2003, no. 4, pp. 58-68.
  • Chanyshev A.I., Efimenko L.L. Matematicheskie modeli blochnyh sred v zadachah mehaniki. Ch. 1. Deformacija sloistoj sredy [Mathematical models of block environments in problems of mechanics. Part 1. The deformation of layered medium]. FTPRPI [Journal of mining science], 2003, no. 3, pp. 72-84.
  • Konek D.A. Materialy s otricatel'nym kojefficientom Puassona [Materials with a negative Poisson's ratio]. Mehanika kompozicionnyh materialov i konstrukcij [Mechanics of composite materials and structures], 2004, vol. 10, no. 1, pp. 35-69.
  • Almgren R.E. An isotropic three dimensional structure with Poisson’s ration = -1. J. Elastisity, no. 15, 1985, pр. 427-430.
  • Shilko S.V., Stoljarov A.I. Deformacionnye harakteristiki obrashhennoj neodnorodnoj struktury pri rastjazhenii [Deformation characteristics facing heterogeneous structure in tension]. Materialy, tehnologii, instrument [Materials, technologies, tools], 1996, no. 2. 64 p.
  • Warren W.E., Kraunik A.M. The effective elastic properties of low-density foams. ThewinterannualmeetingoftheASME. Boston, 1987, pр. 123-145.

Title of the article

SAFEGUARDING CONSTRUCTIONS OF MODERN HYDROMECHANICAL TRANSMISSIONS

Authors

Krasnevski L.G., Corresponding Member of the NAS of Belarus, Doctor of Technical Sciences, Professor, Chief Researcher, Laboratory of Onboard Mechatronic Systems of Mobile Machines, STC "Autotractor Electronics and Electrical Engineering", Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

Poddubko S.N., Candidate of Technical Sciences, Associate Professor, Deputy Director in Science and Innovation, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus

Mactskevich A.A., Leading Design Engineer, OAO “Minsk Wheel Tractor Plant”, Minsk, Republic of Belarus

In the section ENGINEERING COMPONENTS
Year 2012 Issue 1 Pages 26-28
Type of article RAR Index UDK 62-82 Index BBK  
Abstract

The operating principle and construction of the electrofluidic control of modern hydromechanical transmissions that provide protection against the occurrence and consequences of alarm conditions at hazardous failure was considered in the paper.

Keywords

hydromechanical transmissions, electrofluidic control, failure

  You can access full text version of the article
Bibliography
  • Krasnevskij L.G. Upravlenie gidromehanicheskimi mnogostupenchatymi peredachami mobil'nyh mashin [Management of hydromechanical multi-stage transmissions of mobile machines]. Minsk, Navuka i tjehnika, 1990. 256 p.
  • Automatic transmission control for an automotive vehicle driveline having fail-safe logic. US Pat. 4494423, 1985.
  • Transmissii Allison. Rukovodstvo po poisku i ustraneniju neispravnostej [Allison transmissions. Guidelines for troubleshooting], 2005.
  • Nikolaev Ju.I. [et al.]. Unificirovannaja gidravlicheskaja sistema avtomaticheskogo upravlenija i zhizneobespechenija semejstva perspektivnyh gidromehanicheskih peredach MZKT [Unified hydraulic system of automatic control and life support for the family prospective hydromechanical transmission MWTP]. Mehanika mashin, mehanizmov i materialov [Mechanics of Machines, Mechanisms and Materials], 2011, no. 2 (15), pp. 33-38.

Title of the article

PECULIARITIES OF TRACTION ASYNCHRONOUS ELECTRIC DRIVE APPLICATION AS A PART OF RAIL TRANSPORT

Authors

Korol V.M., Chairman of the Board of Directors of OAO "Holding management company "Belkommunmash", Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MECHANICS OF MOBILE MACHINES
Year 2012 Issue 1 Pages 17-19
Type of article RAR Index UDK 621.313.333 Index BBK  
Abstract

Development of asynchronous electric drive and its application on transport vehicles, particularly as a part of trams is treated. Introduction of modeling results for twin-engined drive is provided.

Keywords

asynchronous electric drive, rail transport, tram, asynchronous motor, controlling system

  You can access full text version of the article
Bibliography
  • Basharin A.V., Novikov V.A., Sokolovskiy G.G. Upravlenie jelektroprivodami [Control of the electric drive]. L., Jenergoizdat, 1982.
  • Nesenchuk A.A. Analiz i sintez robastnyh dinamicheskih sistem na osnove kornevogo podhoda [Analysis and synthesis of robust dynamic systems based on the radical approach]. Minsk, OIPI NAN Belarusi, 2005. 234 p.
  • Petrenko Ju.N., Simonovich A.V. Imitacionnaja model avtomatizirovannogo privoda trollejbusa [Simulation model of trolley automated drive]. Modelirovanie intellektual'nyh processov proektirovanija, proizvodstva i upravlenija [Intelligent simulation of the design, production and management] Minsk, 2002, pp. 120-121.
  • Firago B.I., Opejko O.F. Sintez sistemy skaljarnogo upravlenija asinhronnym jelektroprivodom [Synthesis scalar control system of asynchronous electric drive]. Jenergetika. Izv. vyssh. uchebnyh zavedenij i jenergeticheskih obedinenij SNG [Energy. News of higher educational establishments and power associations of CIS], 2007, no. 5, pp. 26-36.
  • Braslavskij I.Ja., Ishmatov Z.Sh., Poljakov V.N. Jenergosberegajushhijasinhronnyjjelektroprivod [Energy-saving asynchronous electric drive]. Moscow, Academa, 2004. 256 p.
  • Moskalenko V.V. Jelektricheskij privod [Electric drive]. Moscow, Academa, 2007. 368 p.
  • Moskalenko V.V. Sistemy avtomatizirovannogo upravlenija jelektroprivoda [Systems for automated control actuator]. Moscow, Infra-M, 2010. 208 p.

Title of the article

ONBOARD SYSTEM FOR MONITORING THE FUNCTIONAL STATE OF VEHICLE OPERATOR

Authors

Savchenko V.V., Director of the STC “Autotractor electronics and electrical engineering”, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section ENGINEERING COMPONENTS
Year 2012 Issue 1 Pages 20-25
Type of article RAR Index UDK 612.821+612.223+616-073.97+15:656.2 Index BBK  
Abstract

Functionality of the modernized onboard system for monitoring of functional state of vehicle operators which based on the system of maintenance of working capacity of drivers are considered. Automatic interpretation of functional state of operators are carrying on the results of the analysis of the dynamics of electrodermal changes parameters and "intensity" of performance of some "typical" and/or "basic" algorithms of activity or their fragments. The onboard system of monitoring, first of all, is intended for development existing and elaboration of new methods for increase of efficiency of drivers functioning, as well as carrying out of experimental researches, is performed during the vehicle operator algorithms of activity. Received results can be used for a substantiation of a rational mode of work and rest, an evaluation of interrelation between actions of drivers and criteria, their characterizing.

Keywords

vehicle, operator, onboard system for monitoring, functional state, electrodermal activity, galvanic skin response

  You can access full text version of the article
Bibliography
  • Raevskaja O.S., Dzhebrailova T.D., Kuznecov S.A. Kozhno-gal'vanicheskaja reakcija pri opredelenii minutnogo intervala vremeni [Galvanic skin response in determining minute interval]. Fiziologija cheloveka [Human physiology], 1985, vol. 11, no. 5, pp. 744-750.
  • Grekova T.I. Kozhno-gal'vanicheskaja reakcija kak pokazatel' izmenenij psihicheskogo sostojanija [Galvanic skin response as a measure of changes in mental status]. Fiziologija cheloveka [Human physiology], 1975, vol. 1, pp. 993-997.
  • Tarakanov P.V. Kozhno-gal'vanicheskaja reakcija u detej doshkol'nogo vozrasta pri razlichnyh funkcional'nyh sostojanijah [Galvanic skin response of preschool children in different functional states]. Zhurn. vyssh. nervn. dejatel'nosti [I.P. Pavlov journal of higher nervous activity], 1982, vol. 32, no. 5, pp. 967.
  • Frolov M.V., Glazkova V.A., Hachaturjanc L.S. Biologicheskaja obratnaja svjaz' - metod i kachestvo operatorskoj dejatel'nosti [Biofeedback - the method and the quality of operator activity]. Psihologich. Zhurnal [Psychological journal], 1984, vol. 5, no. 2, pp. 85-91.
  • Yerkes R.M., Dodson J.D. The relation of strength of stimulus to rapidity of habit formation. Journal of Comparative Neurology and Psychology, 1992, vol. 18, pр. 459-482.
  • Driver vigilance devices: systems review. London, Railway Safety, 2002. 105 p.
  • Dementienko V.V. Fizicheskie principy postroenija sistem bezopasnogo monitoringa sostojanija cheloveka-operatora. Diss. dokt. tehn. nauk [Physical principles of the security system monitoring of the human operator status. Dr. techn. sci. diss.]. Moscow, 2010. 42 p.
  • Gerus S.V. [et al.]. Sistema monitoringa sostojanija voditelja i bezopasnost' na avtomobil'nom transporte [System of monitoring the state of a driver and safety on road transport]. Biomedicinskie tehnologii i radiojelektronika [Biomedical technologies and electronics], 2003, no. 8, pp. 46-52.
  • Savchenko V.V. Obratnye svjazi v zadache podderzhanija operatorov sistem “chelovek – mashina” v sostojanii gotovnosti k jekstrennomu dejstviju [Feedbacks in the task of maintaining system operators "man - machine" in a state of readiness to emergency action]. Sistemnyj analiz i upravlenie v biomedicinskih sistemah [System analysis and management in biomedical systems], 2005, vol. 4, no. 4, pp. 477-481.
  • Savchenko V.V., Svistun M.S., Sikorskij V.V. Sistema podderzhanija rabotosposobnosti voditelja: rezul'taty ispytanij i jeksperimental'nyh issledovanij [Maintain system of driver health: the results of tests and experimental studies]. Avtomobilnaja prom-st [Automotive industry], 2008, no. 1, pp. 32-34.

Title of the article

SCHEMATIZATION AND CALCULATION OF MOBILE MACHINE PRESENTED AS MULTIBODY SYSTEM. REGULAR MECHANICAL SYSTEMS

Authors Algin V.B., Doctor of Technical Science, Professor, Deputy Director in Sciences, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.
In the section MECHANICS OF MOBILE MACHINES
Year 2012 Issue 1 Pages 6-16
Type of article RAR Index UDK 629.113:681.3 Index BBK  
Abstract

The role and place of schematization is considered in calculating the mobile machine which is regarded as a multibody system. Unlike widespread approaches "Object - Equations - Solution", it is proved necessity of the initial stage for correct schematization of the object and the approach "Object - Mechanical system - Calculated model - (Symbolical model) - Equations - Solution". The concept of regular mechanical system, rules for construction of correct mechanical models consisting of elementary mechanical objects is offered and proved.

Keywords

mobile machine, schematization, multibody model, regular mechanical system, dynamical scheme

  You can access full text version of the article
Bibliography
  • Valsan A. Trends, Technology Roadmaps and Strategic Market: Analysis of Vehicle Safety Systems in Europe. International Automotive Electronics Congress. Paris, France, 2006.
  • Minarcin M.A., Rask E., Smith M.R. Challenges and Opportunities in Adoption of Hybrid Technologies in Medium and Heavy Duty Applications. SAE Technical Paper, 2011-01-2251, 2011.
  • Rauh J., Ammon D. System dynamics of electrified vehicles: some facts, thoughts, and challenges. Vehicle System Dynamics, 2011, no. 49(7), pp. 1005-1020.
  • Algin V.B., Ivanov V.G., Shirokov B.N. Osnovnye napravlenija v razvitii mul'tidisciplinarnoj teorii mobil'noj mashiny 2011 [The main directions in the development of multi-disciplinary theory of mobile machines in 2011]. Trudy V Belorusskogo kongressa po teoret. i prikladnoj mehanike “Mehanika 2011” [Proceedings of the V Belarusian Congress of Theoretical and Applied Mechanics "Mechanics 2011"]. Minsk, 2011, vol. 1, pp. 80-98.
  • Multibody system. Available at: http://en.wikipedia.org/wiki/Multibody_system.
  • Vittenburg J. Dinamika sistem tverdyh tel [Dynamics of solids systems]. Moscow, Mir, 1980. 294 p.
  • International Federation for the Promotion of Mechanism and Machine Science. Available at: http://www.iftomm.org.
  • Cuadrado J. [et al.]. Role of MMS and IFToMM in Multibody Dynamics. Mechanisms and Machine Science. Vol. 1: Technology Developments: the Role of Mechanism and Machine Science and IFToMM. Series Editor Marco Ceccarelli, Springer, 2011, Part 2, pр. 161-172.
  • Schiehlen W. Multibody system dynamics: roots and perspectives. Multibody System Dynamics, 1997, vol. 1, no. 2, pp. 149-188.
  • Shabana A.A. Flexible Multibody Dynamics: Review of Past and Recent Developments. Multibody System Dynamics, 1997, vol. 1, no. 2, pp. 189-222.
  • Magnus K. ed. Dynamics of Multibody Systems. Berlin, Springer, 1978.
  • IFToMM Technical Committee for Multibody Dynamics. Available at: www.iftommmultibody.org.
  • Algin V., Ivanov V. Kinematic and dynamic computation of vehicle transmission based on regular constructs. Proceedings of 12th IFToMM World Congress, Besanсon (France), Besanсon, 2007. 6 p.
  • Algin V.B., Lomonosov C.V., Sorochan V.M. Kinematic 3.0: komp. programma [Kinematic 3.0: computer software], no. S20100148, 2010.
  • Algin V.B., Verbickij A.V., Pjanko E.N. Skorostnoj i silovoj raschet transmissii: komp. programma [Speed and power transmission calculation: computer software], no. S20090047, 2009.
  • Algin V.B. [et al.]. Dynamics: komp. programma [Dynamics: computer software], no. S20100147, 2010.
  • Moliboshko L.A. Komp'juternoe modelirovanie avtomobilej [Computer simulations of cars]. Minsk, IVC Minfina, 2007. 280 p.
  • Sazonov I.S. [et al.]. Dinamika kolesnyh mashin [Dynamics of wheeled vehicles]. Mogilev, Belorus.-Ros. un-t, 2006. 462 p.
  • Tarasik V.P. Matematicheskoe modelirovanie tehnicheskih system [Mathematical modeling of technical systems]. Minsk, Dizajn PRO, 2004. 640 p.
  • Zakharik Ju.M. Nauchnye osnovy obespechenija tjagovo-skorostnyh svojstv gruzovyh avtomobilej putem sinteza sistem avtomaticheskogo upravlenija tjagovymi rezhimami. Diss. dokt. tehn. nauk [Scientific bases of maintenance of traction and speed characteristics of trucks through the synthesis of automatic control systems of traction modes. Dr. techn. sci. diss.]. Minsk, BNTU, 2007.
  • Algin V.B. [et al.]. Shematizacija i dinamicheskij raschet mobil'noj mashiny. Sistemy s peremennoj strukturoj [Schematization and dynamic analysis of mobile machine. variable-structure systems]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2008, no. 2, pp. 16-24.
  • Citovich I.S., Algin V.B. Dinamika avtomobilja [Dynamics of a vehicle]. Minsk, Nauka i tehnika, 1981. 191 p.
  • Algin V.B., Pavlovskij V.Ja., Poddubko S.N. Dinamika transmissii avtomobilja i traktora [Dynamics of transmission of a car and a tractor]. Minsk, Nauka i tehnika, 1986. 214 p.
  • Al'in, V.B. Metodika prognozirovanija nadezhnosti i funkcional'nyh razmerov sborochnyh edinic mashin pri proektirovanii. Ch. 3: Shematizacija transmissii pri dinamicheskih raschetah [The method of predicting the reliability and functional dimensions of assembly units in the design of machines. Part 3: Schematization transmission in dynamic calculations]. Minsk, INDMASh AN BSSR, 1989. 46 p.
  • Grenander U. Lekcii po teorii obrazov [Lectures on the images theory]. Moscow, Mir, 1983, vol. 3. 432 p.
  • Krejnes M.A., Rozovskij M.S. Zubchatye mehanizmy (vybor optimal'nyh shem) [Gear mechanisms (selection of optimal schemes)]. Moscow, Nauka, 1972. 428 p.
  • Algin V.B. [et al.]. Kinematicheskij, dinamicheskij i resursnyj raschety v mehanike mashin [Kinematic, dynamic and resource calculations in mechanics of machines]. Teoret. i prikladnaja mehanika [Theoretical and applied mechanics]. Minsk, BNTU, 2005, no. 19, pp. 42-50.
  • Algin V.B. Dinamika, nadezhnost' i resursnoe proektirovanie transmissij mobil'nyh mashin [Dynamics, reliability and resource designing transmissions of mobile machines]. Minsk, Navuka i tjehnika, 1995. 256 p.