Title of the article

OPTIMIZATION OF VOLUME DAMAGEABILITY OF THE HALF-SPACE LOADED BY ELLIPTICALLY DISTRIBUTED CONTACT PRESSURE AND NON-CONTACT STRESSES

Authors

SHERBAKOV Sergei S., D. Sc. in Phys. and Math., Assoc. Prof., Vice-Chairman (State Committee on Science and Technology of the Republic of Belarus, Minsk, Republic of Belarus), Professor of the Department of Theoretical and Applied Mechanics (Belarusian State University, Minsk, Republic of Belarus), This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section TRIBO-FATIGUE SYSTEMS MECHANICS
Year 2018 Issue 4 Pages 96–100
Type of article RAR Index UDK 539.3 Index BBK  
Abstract

The paper considers numerical and analytical modeling of the stress-strain state and the state of volume damageability of a half-space under its simultaneous loading by elliptically distributed load directed along the normal to the surface axis and non-contact extension/compression along one of the coordinate axes parallel to the surface. The dependence of the values of dangerous volumes and integral damageability on the number of boundary elements on the surface of a half-space and on the number of elementary volumes in the three-dimensional computational domain is shown. The ratios of maximum contact pressure and non-contact stresses are obtained at which the values of dangerous volumes are minimal.

Keywords

tribo-fatigue, boundary element method, numerical and analytical modeling, stress-strain state, volume damageability

   
Bibliography
  • Sosnovskiy L.A., Sherbakov S.S. Mechanothermodynamics. Springer, 2016. 155 p.
  • Sherbakov S.S., Sosnovskiy L.A. Mekhanika tribofaticheskikh sistem [Mechanics of tribo-fatigue systems]. Minsk, BSU Publ., 2011. 407 p.
  • Sosnovskiy L.A. Mekhanika iznosoustalostnogo povrezhdeniya [Mechanics of wear-fatigue damage]. Gomel, BelSUT Publ., 2007. 434 p.
  • Sosnovskiy L.A., Bogdanovich A.V., Yelovoy O.M., Tyurin  S.A., Komissarov V.V., Sherbakov S.S. Methods and main results of Tribo-Fatigue tests. International Journal of Fatigue, 2014, vol.   66, pp. 207–219.
  • Sosnovskiy L.A., Sherbakov S.S. Vibro-impact in rolling contact. Journal of Sound and Vibration, 2007, vol. 308, issues  3–5, pp. 489–503.
  • Sherbakov S.S., Zhuravkov M.A. Interaction of Several Bodies as Applied to Solving Tribo-Fatigue Problems. Acta Mechanica, 2013, vol. 224, no. 3. pp. 1541–1553.
  • Zhuravkov M.A., Sherbakov S.S., Krupoderov A.V. Modeling of volumetric damage of multielement clamp-knife-base tribo-fatigue system. Zeitschrift für Angewandte Mathematik und Mechanik, 2017, pp. 60–69.
  • Sherbakov S.S. Modelirovanie povrezhdaemosti metodom konechnykh elementov pri odnovremennom deystvii kontaktnykh i nekontaktnykh nagruzok [Simulation of damage with the help of the finite element method under the simultaneous action of contact and non-contact loads]. Inzhenerno-fizicheskiy zhurnal [Engineering and technical journal], 2012, vol. 85, no. 4, pp. 437–441.
  • Sherbakov S.S. Sostoyanie obemnoy povrezhdennosti tribofaticheskoy sistemy [State of volumetric damage of tribo-fatigue system]. Problemy prochnosti [Problems of strength], 2013, no. 2, pp. 70–79.
  • Sosnovskiy L.A., Sherbakov S.S. Mechanothermodynamical system and its behavior. Continuum Mechanics and Thermo-dynamics, 2012, vol. 24, issue 3, pp. 239–256.
  • Sosnovskiy L.A., Sherbakov S.S. Mechanothermodynamic Entropy and Analysis of Damage State of Complex Systems. Entropy, 2016, vol. 18(7), 268, pp. 1–34.

Title of the article

OPTIMIZATION OF CONTENT OF RUNNING-IN COMPOSITION AND  REGIMES OF TRIBOMECHANICAL PROCESSING OF GAS-THERMAL STEEL COATINGS

Authors

ZHORNIK Viktor I., D. Sc. in Eng., Assoc. Prof., Head of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

BELOTSERKOVSKY Marat A., D. Sc. in Eng., Assoc. Prof., Head of the Laboratory of Gas-Thermal Methods of Machine Components Hardening, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

PARNITSKY Alexander M., Junior Researcher of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus

YALOVIK Alexander P., Director General, JSC “Neftezavodmontazh”, Novopolotsk, Republic of Belarus

In the section MATERIALS SCIENCE IN MECHANICAL ENGINEERING
Year 2018 Issue 4 Pages 86–95
Type of article RAR Index UDK 669.018.95 Index BBK  
Abstract

The mathematical model of the process of tribomechanical modification of gas-thermal steel coatings is developed with the use of the method of computational and experimental modeling. This model makes it possible to choose the optimal running-in regimes depending on the given frictional surface parameters after the tribomechanical processing. In this case the optimization parameters are the concentration of the nanosized additive in the running-in composition, the tribocontact pressure and the slip velocity. And the optimization criteria are the friction coefficient, the surface hardness and the friction path in the running-in. It is shown that, for example, with the aim of tribomechanical modification of gas-thermal spray composite coatings produced by the simultaneous spraying of wires from austenitic steels with a nickel content of not less than СNi = 10 % and the martensitic steel grade with a carbon content of more than CC = 0.4 % with the ratio of the diameters of the wires dmart.st./daust.st. = 1.12–1.20, it is necessary to use the running-in composition with a penetration number of N  = 265–340 units at a concentration of diamond-graphite charge in it СShA-A = 0.25–0.35 wt.% having a particle size within dp = 10–50 nm, and the running-in process must be carried out at a specific load P = 40–50  MPa and a sliding velocity Vsl = 0.20–0.30 m/s.

Keywords

gas-thermal coatings, steels of austenitic and martensitic grades, tribomechanical modification, running-in composition, optimization of running-in regimes, concentration of diamond-graphite charge, specific load, sliding velocity

   
Bibliography
  • Vityaz P.A., Zhornik V.I., Belotserkovsky M.A., Levantsevich M.A. Povyshenie resursa tribosopryazheniy aktivirovannymi metodami inzhenerii poverkhnosti [Increasing the lifetime of friction units with activated methods of surface engineering]. Minsk, Belaruskaya navuka Publ., 2012. 452 p.
  • Lovshenko F.G., et. al. Novye resursosberegayushchie tekhnologii i kompozitsionnye materialy [New resource-saving technologies and composite materials]. Moscow, Energoatomizdat Publ., Gomel, BelSUT Publ, 2004. 519 p.
  • Belyy A.V., Kalinichenko A.S., Devoyno O.G., Kukareko  V.A. Inzheneriya poverkhnosti konstruktsionnykh materialov s ispolzovaniem plazmennykh i puchkovykh tekhnologiy [Surface engineering of structural materials using plasma and beam technologies]. Minsk, Belaruskaya navuka Publ., 2017. 457 p.
  • Wicks Z.W., Jones F.N., Pappas S.P. Organic coatings. Science and technology. Vol. 2. Chichester, John Wiley & Sons Ltd, 1994. 438 p.
  • Ilyushchenko A.F., Okovityy V.A., Shevtsov A.I. Formirovanie iznosostoykikh plazmennykh pokrytiy na osnove kompozitsionnykh samosmazyvayushchikhsya materialov [Formation of wear-resistant plasma coatings based on composite self-lubricating materials]. Minsk, Bestprint Publ., 2005. 253 p.
  • Vityaz P.A., Zhornik V.I., Kukareko V.A., Kamko A.I. Formirovanie iznosostoykikh poverkhnostnykh struktur i mekhanizm ikh razrusheniya pri trenii v srede smazochnogo materiala, modifitsirovannogo ultradispersnymi almazografitovymi
    dobavkami. Chast 2. Model razrusheniya [Formation of wear-resistant surface structures and their damage mechanism in friction with lubricant modified by ultra-dispersed diamond-graphite additives. Part 2. Damage model]. Trenie i iznos [Friction and Wear], 2006, vol. 27, no. 2, pp. 196–200.
  • Kuzharov A.S., Akhverdiev K.S., Kravchik K., Kuzharov  A.A. Molekulyarnye mekhanizmy samoorganizatsii pri trenii. Ch. 1. Issledovanie samoorganizatsii v gidrodinamicheskom rezhime treniya [Molecular mechanisms of self-organization
    during friction. Part I. A study of self-organization under hydrodynamic friction conditions]. Trenie i iznos [Friction and Wear], 2001, vol. 22, no. 1. pp. 84–91.
  • Zhornik V.I., Kukareko V.A., Belotserkovsky M.A. Tribomechanical Modification of Friction Surface by Running-In Lubricants with Nano-Sized Diamonds. Advances in Mechanics Research, 2011, vol. 1, pp. 1–78.
  • Zhornik V.I., Belotserkovsky M.A., Kukareko V.A. Issledovanie protsessov uprochneniya gazotermicheskikh pokrytiy pri trenii v srede nanokompozitsionnoy smazki [Study of the processes of hardening of gas-thermal coatings during friction in the medium of nanocomposite lubricant]. Aktualnye problemy prochnosti: v 2 t. [Topical strength problems: in 2 vol.], 2018, vol. 1, ch. 5, pp. 88–110.
  • Belotserkovsky M.A., Zhornik V.I., Yalovik A.P., Dudan  A.V. Vosstanovlenie valov naneseniem kombinirovannykh pokrytiy giperzvukovoy metallizatsiey [Restoration of shafts by covering with combined coatings by the means of hypersonic metallization]. Vestnik Polotskogo gosudarstvennogo universiteta. Seriya B. Promyshlennost. Prikladnye nauki [Vestnik of Polotsk State University. Part B. Industry. Applied Sciences], 2017, no.   11, pp. 79–83.
  • Belotserkovsky M.A., Yalovik A.P., Dudan A.V. Prirabotka v kompozitsionnykh smazkakh detaley s pokrytiyami, poluchennymi giperzvukovoy metallizatsiey [Running in composite lubricants of parts with coatings made with hypersonic metallization]. Aktualnye voprosy mashinostroeniya: sb. nauch. tr. [Collection of scientific papers “Topical issues of mechanical engineering], 2016, issue 5, pp. 354–356.
  • Spiridonov A.A. Planirovanie eksperimenta pri issledovanii tekhnologicheskikh protsessov [Planning an experiment in the study of technological processes]. Moscow, Mashinostroenie Publ., 1981. 184 p.

Title of the article

MECHANICAL ACTIVATION OF THE POWDER MIXTURE OF “ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE — COMPOSITE B4C/W”

Authors

KOVALEVA Svetlana A., Senior Researcher of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ZHORNIK Viktor I., D. Sc. in Eng., Assoc. Prof., Head of the Laboratory of Nanostructured and Superhard Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

GRIGORIEVA Tatyana F., D. Sc. in Chem., Leading Researcher of the Laboratory of Chemical Materials Science, Solid State Chemistry and Mechanochemistry of the Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia

In the section MATERIALS SCIENCE IN MECHANICAL ENGINEERING
Year 2018 Issue 4 Pages 65–71
Type of article RAR Index UDK 621.762.2 Index BBK  
Abstract

The article presents the results of the experimental studies of the structural transformations of a powder mixture of ultra-high molecular weight polyethylene and 80 wt.% (45 vol.%) of the nanostructured composite B4C/W treated in a high-energy ball planetary mill that are studied by the methods of X-ray diffraction, scanning electron microscopy and Fourier-IR spectroscopy. It is shown that the polymer composite particles of a flaky shape and the size of 160–400 μm with a uniform distribution in them of boron carbide and tungsten particles with the size of 1–5  μm and 0.1–0.2 μm respectively are formed during the process of mechanical activation (MA), while the oxidative destruction of polymer is not detected. The main results of the interaction of the polymer matrix and dispersed filler powders with MA are the processes of breaking of intramolecular bonds, cross-linking of polymer molecules, as well as mechanical dispersion of particles.

Keywords

mechanical activation, microstructure, composites, ultra-high molecular weight polyethylene, boron carbide, tungsten

   
Bibliography
  • Senatov F.S., Senatova S.I., Gorshenkov M.V., Cherdyntsev V.V. Struktura plenok SVMPE posle oblucheniya uskorennymi tyazhelymi ionami [Structure of UHMWPE films after irradiation with heavy ions]. Sovremennye problemy nauki i obrazovaniya [Modern problems of science and education], 2013, no. 5. Available at: http://science-education.ru/ru/article/view?id=10046.
  • Okhlopkova A.A., Petrova P.N., Popov S.N., Sleptsova S.A. Polimernye kompozitsionnye materialy tribotekhnicheskogo naznacheniya na osnove politetraftoretilena [Polymer composite materials of tribotechnical purpose based on polytetrafluoroethylene]. Rossiyskiy khimicheskiy zhurnal [Russian chemical journal], 2008, vol. 52, no. 3, pp. 147–152.
  • Shteynberk E.M., Zenitova L.A. Snizhenie ekologocheskoy opasnosti radiatsionnogo oblucheniya s ispolzovaniem polimernykh kompozitsionnykh materialov. Obzor [Reducing the environmental risk of radiation exposure using polymer composite materials. Review]. Vestnik Kazanskogo tekhnologicheskogo universiteta [Herald of Kazan Technological University], 2012, no. 15(8), pp. 67–71.
  • Ancharov A.I., et. al. Mekhanokompozity — prekursory dlya sozdaniya materialov s novymi svoystvami [Mechanocomposites — precursors for creating materials with new properties]. Novosibirsk, Izdatelstvo SO RAN Publ., 2010. 424 p.
  • Wannasri S., Panina S.V., Ivanova L.R., Kornienko L.A., Piriyayona S. Increasing wear resistance of UHMWPE by mechanical activation and chemical modification combined with addition of nanofibers. Procedia Engineering, 2009, no. 1, pp. 67–70.
  • Borunova A.B., Zhernovenkova Yu.V., Streletskiy A.N., Portnoy V.K. Opredelenie energonapryazhennosti mekhanoaktivatorov razlichnogo tipa [Determination of the energy intensity of different types of mechanical activators]. Obrabotka dispersnykh materialov i sred [Processing of dispersed materials and media], 1999, issue 9, pp. 158–163.
  • Domnich V., Reynaud S., Haber R.A., Chhowalla M. Boron Carbide: Structure, Properties, and Stability under Stress. Journal of the American Ceramic Society, 2011, no. 94(11), pp.   3605–3628.
  • Lifshits E.V., Shevyakova E.P., Ostapenko I.T., Bereznyak E.P., Saenko L.A. IK-spektroskopiya karbidov bora razlichnoy stekhiometrii [IR-spectroscopy of the different stoichiometry boron carbides]. Voprosy atomnoy nauki i tekhniki. Seriya: Fizika radiatsionnykh povrezhdeniy i radiatsionnoe materialovedenie [Problems of atomic science and technology. Series: Physics of radiation effect and radiation materials science], 2004, no. 3(85), pp. 19–22.
  • Edidin A.A., Jewett C.W., Kwarteng K., Kalinowski A., Kurtz  S.M. Degradation of mechanical behavior in UHMWPE after natural and accelerated aging. Biomaterials, 2000, vol. 21, pp. 1451–1460.
  • Dechant J., Danz R., Kimmer W., Schmolke R. Ultrarotspektroskopische Untersuchungen an Polymeren. Berlin, Akademie Publ., 1972.

Title of the article

PECULIARITIES OF CENTRIFUGAL INDUCTION MELTING OF TIN BRONZE WITH NANOSCALE ADDITIONS

Authors

BELOTSERKOVSKY Marat A., D. Sc. in Eng., Assoc. Prof., Head of the Laboratory of Gas-Thermal, Methods of Machine Components Hardening, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

KURILYONOK Artem A., Junior Researcher, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ALEXANDROVA Vera S., Researcher, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MATERIALS SCIENCE IN MECHANICAL ENGINEERING
Year 2018 Issue 4 Pages 79–85
Type of article RAR Index UDK 621.79:536.2 Index BBK  
Abstract

The article presents the physico-mathematical modeling of the dynamic effect of the melt on a nanoscale particle during the formation of coatings by induction centrifugal surfacing. The forces acting on the particle in the liquid melt during the isothermal holding under induction prismatic welding are determined. A dependence is obtained that determines the rate of displacement of nano-sized particles from the initial position in the liquid melt during surfacing of the coating. A method for the formation of coatings with nano-sized additives is developed by induction centrifugal surfacing, including preliminary preparation of the bronze charge. It is shown that the introduced nanoscale additive in an amount of 4 wt.% to the powdered charge of tin bronze, according to the proposed method, leads to its phase-structural transformations, which allows achieving higher anti-frictional properties of bronze, since a uniform distribution of the solid structural component throughout the whole coating is ensured. The detected factors lead to an increase in the tribotechnical properties of coatings — a reduction in the coefficient of friction with simultaneous increase in wear resistance and micro-hardening of coatings.

Keywords

induction surfacing, induction heating, bronze charge, nanoscale additives, dynamic action, antifriction coatings

   
Bibliography
  • Danilchenko B.V. Naplavka [Surfacing]. Kiev, Naukovaya Dumka Publ., 1983. 75 p.
  • Ryabtsev I.A. Induktsionnaya naplavka [Induction weld]. Remont. Vosstanovlenie. Modernizatsiya [Repair. Recovery. Modernization], 2005, no. 11, pp. 37–40.
  • Gafo Yu.N., Sosnovskij I.A. Thermal parameters for centrifugal induction sintering of powder coatings. Powder Metallurgy and Metal Ceramics, 2009, vol. 48, no. 1–2, pp. 105–111.
  • Belyavin K.E., Sosnovskiy I.A., Khudoley A.L. Induktsionnyy nagrev v protsessakh tsentrobezhnogo naneseniya pokrytiy [Induction heating in the processes of centrifugal coating]. Vestnik fundomentalnykh issledovaniy [Bulletin of the Foundation for Fundamental Research], 2013, no. 3(36), pp. 70–87.
  • Babkin V.G., Terentev N.A., Perfileva A.I. Litye metallomatrichnye kompozity [Cast metal matrix composites]. Zhurnal Sibirskogo Federalnogo universiteta: Materialovedenie i tekhnologii [Journal of Siberian Federal University: Materials Science and Technology], 2014, vol. 4, no. 7, pp. 416–423.
  • Komarov A.I. Sintez nanostrukturirovannykh tugoplavkikh napolniteley, ikh vliyanie na strukturu i svoystva siluminov [Synthesis of nanostructured high-melting fillers, their influence on the structure and properties of silumins]. Perspektivnye tekhnologii [Advanced technologies], 2015, vol. 2, ch. 12, pp. 202–223.
  • Mikheev R.S., Chernyshova T.A. Alyumomatrichnye kompozitsionnye materialy s karbidnym uprochneniem dlya resheniya zadach novoy tekhniki [Alumoumatrix composite materials with carbide hardening for solving problems of new technology]. Moscow, Maska Publ., 2013. 356 p.
  • Sosnovskiy I.A., Gafo Yu.N., Kuznechik O.O., Klimenko S.E., Grudko I.I., Trembitskiy I.P. Ispolzovanie nanostrukturnykh modifikatorov pri induktsionnoy tsentrobezhnoy naplavke antifriktsionnykh pokrytiy [Use of nanostructured modifiers for induction centrifugal surfacing of antifriction coatings]. Sbornik materialov 2 Mezhdunarodnoy nauchno-prakticheskoy konferentsii “Inzheneriya poverkhnostnogo sloya detaley mashin” [Proc. 2th International Scientific and Practical Conference “Engineering of the surface layer of machine parts”]. Minsk, 2010, pp. 49–51.
  • Vityaz P.A., Komarov A.I., Komarova V.I., Shipko A.A., Senyut V.T. Sozdanie nanosturirovannykh kompozitsionnykh modifikatorov dlya splavov alyuminiya [Creation of nanostructured composite modifiers for aluminum alloys]. Doklady NAN Belarusi [Reports of the National Academy of Sciences of Belarus], 2011, vol. 55, no. 5, pp. 91–96.
  • Landau L.D., Lifshits E.M. Teoreticheskaya fizika: Uchebnoe posobie. T. 6: Gidrodinamika [Theoretical physics: Textbook. Vol. 6: Hydrodynamics]. Moscow, Nauka Publ., 1986. 736 p.
  • Khodakov G.S., Yudkin Yu.P. Sedimentatsionnyy analiz vysokodispersnykh sistem [Sedimentation analysis of highly disperse systems]. Moscow, Vysshaya shkola Publ., 1981. 496 p.
  • Yudin S.B., Levin M.M., Rozenfeld S.E. Tsentrobezhnoe lite [Centrifugal casting]. Moscow, Mashinostroenie Publ., 1972. 280 p.
  • Gulyaev B.B. Liteynye protsessy [Foundry processes]. Moscow, Mashgiz Publ., 1960. 416 p.
  • Lovshenko F.G., Lovshenko G.F. Zakonomernosti formirovaniya fazovogo sostava, struktury i svoystv mekhanicheski legirovannykh materialov [Regularities in the formation of the phase composition, structure, and properties of mechanically alloyed materials]. Mogilev, Belorussko-Rossiyskiy Universitet Publ., 2016. 420 p.
  • Lovshenko F.G., Lovshenko G.F. Kompozitsionnye nanostrukturnye mekhanicheski legirovannye poroshki dlya gazotermicheskikh pokrytiy [Composite nanostructured mechanically alloyed powders for gas-thermal coatings]. Mogilev, Belorussko-Rossiyskiy Universitet Publ., 2013. 215 p.

Title of the article

PECULIARITIES OF THE STRUCTURE FORMATION AND PROPERTIES OF SILUMIN AlSi7 UNDER THE INFLUENCE OF THE NANOFILLER TiC-Al2O3

Authors

KOMAROV Alexander I., Ph. D. in Eng., Head of the Laboratory of Modification Technologies of Engineering Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ORDA Dmitriy V., Junior Researcher of the Laboratory of Modification Technologies of Engineering Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus

ISKANDAROVA Donata O., Junior Researcher of the Laboratory of Modification Technologies of Engineering Materials, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus

In the section TECHNOLOGICAL MECHANICS
Year 2018 Issue 4 Pages 65–71
Type of article RAR Index UDK 669.715 Index BBK  
Abstract

The article deals with the structural-phase transformations of the pre-eutectic alloy AlSi7, occurring during its modification by nanoscale composition TiC–α-Al2O3, introduced together with micro powders of aluminum or copper. It is shown that the use of micro powders of different nature and morphology has a direct impact on the degree of transformation of the alloy structure. In this case, the introduction of a nanofiller is most effective together with copper powder, the particles of which are represented by dendrites with a developed surface. It is shown that the modification of the alloy by small fractions (0.5 wt.%) of nanofiller leads to dispersion of the structure (reduction of aluminum solid solution dendrites and iron-containing inclusions by 2 and 3 times, respectively), as well as changes in the morphology of intermetallic inclusions. The formation of the modified structure reduces the friction coefficient, increases wear resistance and extends the range of loads. It is shown that the introduction of nanoscale composition TiC–α-Al2O3 in the amount of 0.5 wt.% together with the micro powder of copper or aluminum leads to a decrease in the coefficient of friction in 1.8–2 times at loads up to 20 MPa, and the additional introduction of CNT provides an intensive reduction in the coefficient of friction at 30 MPa to values 0.016–0.018. It was found that the use of aluminum micro powders with the introduction of the modifier provides an increase in wear resistance by 1.4–1.6 times, and the use of copper or copper with CNT provides a multiple increase in wear resistance (weight loss on the samples is not fixed), whereas for the initial alloy it is 8.73∙10–5 mg/m.

Keywords

nanofiller, titanium carbide, corundum, structure formation, alloy AlSi7, friction coefficient, wear resistance

   
Bibliography
  • Belyaev A.I., Bochvar O.S., Buynov N.N. Metallovedenie alyuminiya i ego splavov [Metallurgy of aluminum and its alloys]. 2nd ed. Moscow, Metallurgiya Publ., 1983. 280 p.
  • Mondolfo L.F. Aluminum Alloys. Structure and Properties. London, Butterworth-Heinemann, 1976. 982 p.
  • Das D.K., Mishra P.C., Singh S., Thakur R.K. Properties of ceramic-reinforced aluminum matrix composites — a review. International Journal of Mechanical and Materials Engineering, 2014, no. 1:12, pp. 1–16.
  • Verresh Kumar G.B., Rao C.S.P., Selvaraj N. Mechanical and tribological behavior of particulate rein-forced aluminum metal matrix composites — a review. Journal of Minerals & Materials Characterization & Engineering, 2011, vol. 10, no. 1, pp. 59–91.
  • Abdel-Nasser M.O. Development of Al-TiC alloys using powder metallurgy as grain refiners for aluminum and its alloys. International Journal of Engineering Research and Applications, 2014, vol. 4, issue 7 (version 6), pp. 118–125.
  • Kaftelen H., Goller G., Unlu N., Henein H. Comparative processing-structure-property studies of Al-Cu matrix composites reinforced with TiC particulates. Composites. Part A. Applied Science and Manufacturing, 2011, no. 42, pp. 812–824.
  • Borodianskiy K., Zinigrad M. Mechanical Properties and Microstructure Characterization of Al-Si Cast Alloys Formation Using Carbide Nanoparticles. Journal of Materials Sciences and Applications, 2015, vol. 1, no. 3, pp. 85–90.
  • Mikheev R.S., Chernyshova T.A. Alyumomatrichnye kompozitsionnye materialy s karbidnym uprochneniem dlya resheniya zadach novoy tekhniki [Aluminum-matrix composite materials with carbide hardening for solving problems of new technology]. Moscow, Maska Publ., 2013. 356 p.
  • Komarov A.I. Sintez nanostrukturirovannykh tugoplavkikh napolniteley, ikh vliyanie na strukturu i svoystva siluminov [Synthesis of nanostructured high-melting fillers, their influence on the structure and properties of silumins]. Perspektivnye materialy i tekhnologii [Advanced materials and technologies], 2015, vol. 2, ch. 12, pp. 202–223.
  • Komarov A.I., Komarova D.I., Orda D.V. Sintez karbido-korundovogo napolnitelya i ego vozdeystvie na strukturu i  svoystva porshnevogo splava AK12M2MgN [Synthesis of carbide-corund filler and its impact on the structure and properties of piston GK-AlSi12(Cu) alloys]. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and materials], 2016, no. 1(34), pp. 81–86.
  • Komarov A.I., Komarova V.I., Orda D.V. Kompozitsionnyy poroshok TiC–α-Al2O3 i sposob ego polucheniya [Composite powder TiC–α-Al2O3 and method for its preparation]. Patent RB, no. 22136, 2016.
  • Komarov A.I., Komarova V.I., Iskandarova D.O., Orda D.V. Sposob modifitsirovaniya alyuminiya ili alyuminiy-kremnievykh splavov [Method of modification of aluminum or aluminum-silicon alloys]. Application RB, no. 20170407, 2017.